GovChime
Notice ID: 5cd4cb1f3ee0e3d4fbf05918f8995e73Presolicitation

66--Pyrometer

Archived on August 6, 2013. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC+02:00
Posted
June 7, 2013
Notice type
Presolicitation
NAICS
334513: Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-RI
Place of performance
ACC - Warren (ACC-WRN)(JMTC-RIA) Rodman Avenue Bldg 210, 1 Rock Island Arsenal Rock Island IL 61299-5000 US
PSC
66: INSTRUMENTS AND LABORATORY EQPT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
W9098S13T0245
Notice ID
5cd4cb1f3ee0e3d4fbf05918f8995e73

Description

One (1) Pyrometer, Extreme High Temperature Optical Thermometer for RIA-JMTC's Titanium furance. To be purchased in accordance with Rock Island Purchase description M0000-13-9-50 dated 18 April 2013. This procurment is sole sourced to Consarc Corporation; CAGE: 4V6H0 This procurment is sole source IAW FAR 6.302-1 All inquiries shall be in writting and emailed to the Contract Specialist, sabrina.l.lowe.civ@mail.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Sabrina Lowe, 309-782-1598 ACC - Warren (ACC-WRN)(JMTC-RIA)

Documents

No documents available.

Lifecycle

Solicitation:W9098S13T0245
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. Pre-SolicitationCurrentJun 7, 2013

    66--Pyrometer

    Notice 5cd4cb1f3ee0e3d4fbf05918f8995e73 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
NOTICE OF INTENT TO SOLE SOURCE AND IS RESTRICTED TO SUPER SYSTEMS INC. CAGE: 3DYS7 / UEI: TK4EB1EKHDN3 Contractor Address: 7205 Edington DR, Cincinnati, Ohio, 45249-1064, United States Requirement: MAINTENANCE - ELECTRICAL PIT FURNANCE #37 SERVICE & Parts Upgrade Purpose: To have Super Systems Incorporated provide a complete electrical controls upgrade with Super System INC. proprietary controls and software to communicate with existing SKADA Super Data System already installed in Heat Treat Forge, for recording and monitoring purposes, flow rack upgrade, and an updated electrical drawing packet for Electrical Pit Furnace. *This is a notice of intent to sole source to Super Systems INC. due to proprietary control and OEM capability, which is restricted to Super Systems INC. only.*
-Special Notice11/10/2026
This Notice is a continuation of Notice ID W912P627QA001.Description of Requirement: The U.S. Army Corps of Engineers, Chicago District, intends to establish a firm-fixed-price purchase order on a sole-source basis to Innovasea Systems Inc. (UEI: L4M7A3Q5N9K1, NCAGE: L0683) of Bedford, Nova Scotia, Canada. The requirement is for the procurement of proprietary VEMCO-brand acoustic telemetry equipment. The specific items required include but are not limited to: NexTrak R1 Transponding Acoustic Receiver with battery; VR2Tx-69kHz Coded Acoustic Receiver with Transponder; and VR100 Surface Transponder and Manual Tracking Acoustic Receiver. This equipment is essential for the continuation of a 14-year-long Invasive Carp Monitoring and Response Plan and must be fully compatible and interoperable with the existing VEMCO telemetry network deployed in the Chicago Area Waterways (CAWS) and Illinois Waterway (IWW). Authority: This acquisition is being conducted under the authority of Federal Acquisition Regulation (FAR) 13.101(b) , which allows for soliciting from a single source if the contracting officer determines that only one source is reasonably available to satisfy agency requirements. Justification: This equipment is essential for the continuation of the 14-year-long Invasive Carp Monitoring and Response Plan. The existing telemetry network, valued at over 500,000 USD, is comprised exclusively of VEMCO-brand equipment, which is proprietary to Innovasea Systems Inc. The several thousand ultrasonic transmitters already deployed in the river by USACE and its key agency partners (including the U.S. Fish and Wildlife Service, Southern Illinois University, and the U.S. Geological Survey) can only be detected and decoded by VEMCO receivers. Innovasea owns the patent to this technology. Procuring equipment from any other source would render the entire existing network inoperable and jeopardize the multi-million-dollar federal program. Therefore, Innovasea is the only source capable of providing the supplies that will meet the Governments requirements for interoperability and mission continuity. Submission Instructions: This notice does not constitute a solicitation for offers, proposals, etc. However, interested firms may send a capabilities statement NO LATER THAN 4:30p.m. (CDT) on November 6, 2026. Statements should be sent to of Kyle Smith at kyle.d.smith@usace.army.mil. The email subject line must reference PANGLR-26-P-0000 033648. Award is anticipated on or about November 24, 2026. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Points of Contact: Contract Specialist Kyle Smith, kyle.d.smith@usace.army.mil; Contracting Officer Samantha L. Stiles, Samantha.L.Stiles@usace.army.mil. All responses received by the deadline will be reviewed by the Government. No telephone inquiries will be accepted.
-Special Notice11/06/2026
This is a Request for Information (RFI) only. This RFI is for market research and planning purposes and does not constitute a solicitation or a promise to issue a solicitation in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. The Government is not seeking proposals at this time and will not accept unsolicited proposals. Respondents are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party expense.Description of Requirement: The U.S. Army Corps of Engineers, Chicago District, is seeking sources capable of providing proprietary VEMCO-brand acoustic telemetry equipment, manufactured by Innovasea Systems Inc. This equipment is essential for the continuation of a 14-year-long Invasive Carp Monitoring and Response Plan and must be fully compatible and interoperable with the existing VEMCO telemetry network deployed in the Chicago Area Waterways (CAWS) and Illinois Waterway (IWW). The specific items required include, but are not limited to: NexTrak R1 Transponding Acoustic Receiver with battery; Decoding: Generation-2 code map. VR2Tx-69kHz Coded Acoustic Receiver with Transponder; Innovasea Decoding: Generation-2. VR100 Surface Transponder and Manual Tracking Acoustic Receiver (Model VR100-300).Capability Statement Requirements: Interested parties who believe they are capable of providing the exact VEMCO-brand items listed above are invited to submit a capability statement. The statement must include, at a minimum, the following information: Company Information including Company Name, Address, Point of Contact (Name, Email, and Phone Number). Entity Identification including Unique Entity ID (UEI) and CAGE code. Business Size including business size and socioeconomic status under NAICS code 334511 (e.g., Small Business, Woman-Owned Small Business, Service-Disabled Veteran-Owned Small Business, HUBZone, etc.). Authorization including documentation or a statement confirming your company is an Original Equipment Manufacturer (OEM) or an authorized distributor/reseller for the specific VEMCO product line required. Provide evidence of your ability to source and deliver these exact items. Technical Capability including a brief narrative describing your company experience providing similar acoustic telemetry equipment to federal or state agencies.Submission Instructions: All capability statements must be submitted electronically via email to the points of contact listed below. The email subject line must reference RFI-W912P627QA001. Contract Specialist: Kyle Smith, kyle.d.smith@usace.army.mil. Contracting Officer: Samantha L. Stiles, Samantha.L.Stiles@usace.army.mil. Responses must be received no later than the response due date and time specified in this notice. No telephone inquiries will be accepted.
-Special Notice10/13/2026
SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources to provide expert engineering support to trouble shoot process control system providing steam water and air. Must have expertise in process control plumbing and control valves for steam systems. Must have expertise in Allen Bradley PLC programming. The Government requests that responses be submitted electronically to mary.k.prebensen.civ@army.mil and Wesley.s.shaw.civ@army.mil by November 26th, 2026 by 5pm EST. Background: The Government (DEVCOM Soldier Center) is in need of expert engineering support to diagnose current PLC and piping system which support multiple hydraulic press systems. The existing system controls water, steam and air to molding tooling, and the PLC operates on custom Allen-Bradley control software. As it stands, the system is physically installed, however does not provide necessary temperature control in either manual or automatic modes. Issues may be traced to the original system design, pipe rack installation, PLC programming or some combination of the three. Description: Expert engineering services are sought to diagnose newly installed PLC control system to ensure that it can meet system design requirements, can be operated safely and reliably, and is adaptable for future operation and changing requirements. A new PLC system has been designed and installed per a list of system requirements, however is not able to control temperature per design requirements either due to control logic, poor valve selection or related piping design/installation. SC requires a 3rd party engineering service to validate as-built drawings against the installed system, verify/update PLC programming, provide necessary hardware changes to bring the system up to full operability. Specific System Specifications: Electric steam boiler provides 125psi dry steam as primary heat source for molding tooling. Standalone chiller provides chilled water at ~60 psi, and house air provides air for purge and mist functions. The Allen-Bradley PLC system controls the various media through a series of modulating valves to heat or cool the tooling. The PLC is intended to have recipe writing and management for automated control. Basic recipe for our process includes steam heat via pressure control to desired temperature setpoint, hold for ~1 hr while controlling temperature. The tooling is then cooled with chilled water at a controlled cooling rate. Our standard tooling includes an upper and lower platen, and the PLC has capability to control these independently. Additional system requirements will be included if there is a future RFP. Current known system issues: System will not maintain equivalent temperature for upper and lower platens during heat up or hold. System will not control cooling rate based on system feedback loop. System trend screen not displaying data correctly. System alarms remain untested. Mist function does not function without vibration of piping rack. Unique Vendor qualifications: Potential vendor must be US based and employ US citizens identified to work on the PLC system due to sensitivity of materials and products produced by the installation laboratory. Potential vendor must be licensed in process system design with specific expertise in steam controls. Potential vendor must be able to read modify and update Allen Bradly system code. Deliverables: Full system walkdown and comparison to As-built drawings. Analysis of system design, layout, valve selection, PLC operability as compared to provided list of system requirements. List of proposed design changes to meet system requirements and cost of implementation. Install required hardware and make required changes to system software. May subcontract for implementation of hardware changes. Provide updated As-built drawings for plumbing systems, electrical systems, PLC controls systems. System demonstration and verification to the As-built drawings provided Modified code in digital and hardcopy. Verified system manual. Full system demonstration and minimum 1 day training on system operation. Delivery Date: Government estimates work will be completed within 6 months of date of contract award. Government Furnished Property (Equipment/Materials/Information/Computer Utilization): All work to be performed on site at SC with access to existing PLC and piping rack. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM Soldier Center via e-mail to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 26th, 2026 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 20th, 2026 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
-Market Research11/26/2026
Notice ID: W912DR27XC1S4 NAICS Code: 334513 – Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variable Size Standard: 750 employees THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTE, OR BID. NO AWARD WILL BE MADE FROM THIS SOURCES SOUGHT. THE GOVERNMENT WILL NOT REIMBURSE RESPONDENTS FOR ANY COSTS INCURRED FOR THEIR PARTICIPATION IN THIS SOURCES SOUGHT. ALL RESPONSES WILL BE USED TO DETERMINE THE APPROPRIATE ACQUISITION STRATEGY FOR THE POSSIBLE FUTURE ACQUISITION. The U.S. Army Corps of Engineers (USACE), Baltimore District (NAB), seeks to determine the interest, availability, and capability of potential sources to satisfy controls and instrumentation supplies and incidental service needs of the Washington Aqueduct (WA). This Sources Sought Notice is one facet of the Government’s overall market research strategy. No acquisition strategy will be determined based solely on the information received from this Sources Sought Notice. Both small and large businesses are highly encouraged to respond in this Sources Sought. Background The WA is a public water supply agency that produces an average of 135 million gallons of water per day at two treatment plants located in the District of Columbia. The mission of the WA is to collect, purify, and pump an adequate supply of water to its wholesale customers — DC Water, Arlington County, and Fairfax Water. The place of performance/delivery is the WA’s Dalecarlia and McMillan Water Treatment Plants in Washington, D.C. Requirement Description NAB intends to satisfy controls and instrumentation supplies and incidental service needs of WA by awarding a target of three (3) firm-fixed price Blanket Purchase Agreements (BPAs). Each BPA will have a five (5) year ordering period. NAB anticipates utilizing the source selection procedures outlined in Revolutionary FAR Overhaul (RFO) part 12 – Acquisition of Commercial Products and Commercial Services. Scope Industrial process electronic measuring instruments used for monitoring and controlling water treatment and transmission operations, including multiple proprietary brands to ensure compatibility with current equipment. Brand names required: Endress + Hauser, Rockwell Automation, Schweitzer Engineering, Allen Bradley, ABB, Eaton, Toshiba, Hach, Lovibond, In-Situ ChemScan, Swan Analytical, Benchmark Measurement, Limit Torque, Auma, Rotork, Trident Valve, Accusonic, Precision Digital, Teledyne Meridan, SignalFire, Siemens, Johnson Controls, and Reliable Controls. Services that may be in a BPA call include but are not limited to: preventative maintenance and repair services for uninterruptable power supply systems; fiber optic cable installation, testing, and repair; and installation, configuration, commissioning and training of supplies. Master dollar limit: $5,000,000.00 Call limit: $350,000.00 Capabilities General Information Company Name Commercial and Government Entity (CAGE) code Unique Entity Identifier (UEI) Company Address Point of Contact (Name, Title) Phone Number Email Address Indicate your business size based on NAICS code 334513, which has a size standard of 750 employees. If applicable, please indicate if your business falls into any or a combination of the following categories: Small Business 8(a) small business Historically underutilized business zone (HUBZone) Service-disabled veteran-owned small business (SDVOSB) Woman-owned small business (WOSB) Provide a description of your capabilities for providing the controls and instrumentation supplies and services above. Additionally, please include at least two (2), but no more than three (3), examples of past contracts or orders providing controls and instrumentation supplies and services. The examples should include the amount of the order, date, delivery location and customer, and types of supplies. Provide a point of contact that would serve as the BPA account manager for your company. What is the primary nature of your business? (e.g. manufacturer, authorized distributor, third-party seller, etc.)? Provide details regarding your service delivery area, as well as your experience in providing supplies to customers in the Washington DC region. Provide details on your ability to deliver products from receipt of order within specified timeframes. Do you have an online catalog and/or ordering portal? Response Submission Submit your response no later than 12 November 2026 at 2:00 PM Eastern Standard Time (EST) by completing the form linked below: https://forms.osi.apps.mil/r/H8uLJuht5n Questions If there are general questions as you prepare a response, please contact Kennedy Vila, Contract Specialist at KennedyLuther.S.Vila@usace.army.mil and include Angela Padua, Contracting Officer at Angela.S.Padua@usace.army.mil. Comments will be shared with the Government project team, but otherwise will be held in strict confidence.
-Market Research11/12/2026

Additional Details

Solicitation Number

W9098S13T0245

Archive Date

Aug 6, 2013