GovChime
Notice ID: d89c45d6b23744a5afd55e2075705bd7Solicitation

FTW506 Life Safety Repairs

Responses closed . Full description on SAM.gov.

Overview

Response deadline
2:00 PM AKDT
Posted
July 28, 2026
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
238210: Electrical Contractors and Other Wiring Installation Contractors
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION PACIFIC OCEAN.ENDIST ALASKA.W2SN ENDIST ALASKA
Place of performance
Fort Wainwright, Alaska
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911KB26RA039
Notice ID
d89c45d6b23744a5afd55e2075705bd7

Description

This is a solicitation notice for a total small business set aside design build Request for Proposal (RFP) to install power on the southeast of Hangar 1 to accommodate the Black Hawk Aircrew Trainer (BAT) and the Transportable Flight Procedure Simulator (TFPS) including the ECU units for each device. Electrical requirements for each device are: two 120/208v, 200 amp, 60Hz, three phase, 4 wire plus ground services with MS980555C52412S or MS90555C52143S receptacles. The project will connect Simulators to the Fire Alarm System, converting bay areas to a wet pipe sprinkler system, and correct egress deficiencies and other life safety repairs needed to ensure life safety including code required egress/emergency lighting and the like. Finally, the project will also install expanded metal mesh in a prefab arms vault that was installed in the structural repair project (FTW433) to be in compliance with AR190-11 Tab G to be used as an Arms Room. Updates to the existing fire system to meet current building codes may be required. This building has been identified as a historical building. Coordination with the SHPO will be required to ensure project will not violate any laws or regulations. The construction cost limitation for this requirement is $18,000,000. The performance period will be approximately 600 calendar days.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Lifecycle

  1. 1
    Version 1Solicitation

    FTW506 Life Safety Repairs

    Notice eb83e29957544a2bbab8d9347199f9ec on SAM.gov

  2. 2
    Version 2Solicitation

    FTW506 Life Safety Repairs

    Notice f33343c937d64280b96835c86e327291 on SAM.gov

  3. 3
    Version 3SolicitationCurrent

    FTW506 Life Safety Repairs

    Notice d89c45d6b23744a5afd55e2075705bd7 on SAM.gov

Other notices for this solicitation

  1. Pre-SolicitationRelated noticeApr 28, 2026

    FTW506 Life Safety Repairs

    Notice aab9db73ec224c05988da97a2981774a on SAM.gov

  2. Pre-SolicitationRelated noticeApr 30, 2026

    FTW506 Life Safety Repairs

    Notice eb9780261fde48258e955731770a245d on SAM.gov

  3. Pre-SolicitationRelated noticeMay 26, 2026

    FTW506 Life Safety Repairs

    Notice 5bb9428feeef4b879c056cb7902185dd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
FIRE ALARM SYSTEM UPGRADE.
-AwardedOpen
THIS A PRE-SOLICITATION NOTICE. The Mission & Installation Contracting Command (MICC)-Fort Buchanan has a Request for Quote (RFQ) No. W912C327QA001 for Electrical Substation Maintenance and Repairs. A Firm Fixed Price contract will be awarded for this requirement. The RFQ will be issued on or about 23 November 2026. The RFQ will be issued as 100% set-aside small business on a competitive basis. All responsible sources are invited to submit a quote under this solicitation. The North American Industry Classification System (NAICS) code applicable to this requirement is 238210, Electrical Contractors and Other Wiring Installation Contractors. The size standard is $19 Million. MICC has a requirement for Electrical Substation Maintenance and Repairs, including all necessary administrative functions, personnel, materials, tools, equipment, services, transportation, and insurance required to perform the services outlined in the PWS. The requirement supports Fort Buchanan’s electrical distribution systems serving military and civilian personnel, tenant commands, schools, housing areas, and associated organizations across the installation. Work includes annual preventive maintenance, electrical diagnostics, utility coordination with LUMA, vegetation control, unscheduled service response, and corrective repairs using Original Equipment Manufacturer (OEM) or approved parts. For any request for information on this requirement contact Eileen Rivera at eileen.z.riveradomenech.civ@army.mil and/or Felix Marrero at Felix.r.marrero2.civ@army.mil.
-Pre-Solicitation11/23/2026
This Sources Sought Posting is being issued in accordance with Revolutionary Federal Acquisition Regulation (FAR) Overhaul (RFO) Part 10, Market Research. The purpose of this posting is to gain knowledge of potential sources for this service including interested Small Business Concerns. Its sole purpose is to provide information for planning and market research only and shall not be construed as either a solicitation or obligation on the part of the Government. The Government welcomes responses from all interested parties; however, no decision or award of contract will be made based on responses from industry. The Government will not pay for the preparation of, nor the subsequent use of, information submitted in response to this Sources Sought. Respondents will not be notified of the outcome of the Government’s review of the information received. Additionally, the Government does not intend to hold discussions concerning this Sources Sought with any interested parties but reserves the right to contact vendors if additional information is required for clarifications as it pertains to the Sources Sought. The objective of this effort is to engineer, furnish & install (EF&I) a new inside plant (ISP) telecomm conduit that the 129 CS will use to support the future install of a new outside plant (OSP) fiber optic cable (FOC). The primary necessity of this effort is to ensure that an ISP telecomm conduit pathway is already in place and available for use prior to the onset of the forthcoming OSP FOC install inside Rm 21A. See attached draft Statement of Objectives for more information. The NAICS code for this requirement is 238210, Electrical Contractors and Other Wiring Installation Contractors. The Small Business Administration size standard for small businesses in this industry is $19,000,000. Instructions to Vendors All interested concerns will submit a written notice, not to exceed five (5) pages, stating the concern’s positive intention to submit a proposal as a prime contractor no later than the deadline posted with this notice. Responses to this Sources Sought should include the following information: A positive statement of intent to submit a proposal as a prime contractor, A listing of projects completed during the past five (5) years for both Government and private industry. The list should provide the type of service, dollar value, contract number, location, and point of contact. Also, please indicate whether the firm was a prime or subcontractor—if the firm was a subcontractor, please provide a point of contact with the prime contractor, A brief outline of resources, subcontractors, and key personnel that would be used to accomplish the contract, and Demonstration of the firm’s socioeconomic status (i.e., SB, 8(a), HUBZone, EDWOSB, WOSB, SDVOSB, etc.), and size. If adequate small business firms are not available for adequate competition for this project, it may be advertised as an unrestricted solicitation. Submit responses directly to austin.breault.1@us.af.mil; telephone calls and facsimile responses will not be honored. Please reference the Notice ID and project title in the subject of your message. Please limit your responses to standard documents (i.e., Microsoft Office, Adobe PDF, etc.). Do not send compressed (i.e., .zip or .exe extension) or other file types as they will be stripped from your message.
-Market Research11/16/2026
Title: LLA Navigation Lock Switchgear Replacement: The work is located at the Lower Granite Dam, Pomeroy, Washington. The solicitation will be issued as a Best Value Trade-Off (BVTO) Request for Proposal (RFP) and result in a single firm-fixed price construction contract. This procurement is a small business set aside. 100% Performance and payment bonds will be required for this project. The North American Industry Classification System (NAICS code for this project is 238210 Electrical Contractors and Other Wiring Installation Contractors and the associated small business size standard is $19 million. Solicitation number W912EF27RA002 will be posted to the SAM.gov Contract Opportunities website on or about mid November 2026. The proposal due date will be contained in the solicitation and any solicitation amendments that may be issued. The solicitation will be made available for download on the SAM.gov Contract Opportunities website. Offerors are responsible for checking the referenced page for any updates to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the documents posted at the referenced website. Proposals will be due approximately 30 days after the solicitation is posted. The exact proposal due date will be indicated in the solicitation. System for Award Management (SAM): Offerors must register in the SAM at https://sam.gov/content/home prior to receiving an award. NOTE: The response date that is required to post this notice is not in any way a due date for any submission. This is a pre-solicitation notice only. Scope: The scope of the work involves replacing existing medium and low voltage switchgear lineups and their associated feeder cables with modernized medium and low voltage switchgear and motor control center lineups at Lower Granite Dam Navigation Lock. The main features of work includes: Provide and install one (1) new medium voltage switch gear. Provide and install one (1) new low voltage switch gear. Provide and install two (2) new motor control center lineups. Provide modernized controls for existing electrical loads. Provide one (1) new 4,160/480-V 1,000 kVA transformer. Provide lighting load centers to replace existing panels. Provide new concrete housekeeping pads for new electrical equipment. Provide new cable trays and conduits where required by circuit reconfigurations and to bring fill ratios to levels that meet electrical codes. Provide an HMI screen to replace an existing annunciator panel. Demolish existing medium and low voltage switchgear, motor controls centers, and transformers. Demolish the existing 480VAC feeders routed from existing low voltage switchgear and motor control centers. Seal hatch and any expansion joints, or cracks, to prevent water intrusion in an existing electrical room. This work is anticipated to be performed in 2028 and 2029, with cutover power construction work being completed during the 2028 and 2029 navigation lock outages. Access to the navigation lock deck and electrical substation rooms will be available for workers and equipment. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THE SOLICITATION EITHER BEFORE OR AFTER THE CLOSING DATE. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS PRE-SOLICITATION NOTICE OR ANY FOLLOW-UP INFORMATION REQUEST. All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1). Establish and manage an effective on-site Safety and Health program in accordance with EM 385-1-1 that will require the development and submission of a comprehensive project specific Accident Prevention Plan for Government acceptance. In addition, develop and submit for Government acceptance Activity Hazard Analyses for each phase of work and a project specific Fall Protection Plan that comply with EM 385-1-1. A Site Safety and Health Officer (SSHO) employed by the prime contractor is required for each shift of the contractor's on-site operations. The SSHO shall possess a minimum of 5-years’ experience in construction safety on similar projects, shall have completed the 30-Hour OSHA Construction Safety training within the last 5 years, and shall have completed at least 24 hours of safety training from accredited safety training sources each year for the past 5 years. Establish and manage an effective Contractor Quality Control (CQC) System that will require the development and submission of a comprehensive project specific CQC Plan for Government acceptance. A CQC System Manager employed by the prime contractor is required to be on-site for each shift of the Contractor's operations. The CQC System Manager must possess a minimum of 5 years relevant experience in a supervisory or management position such as Quality Control Manager, Quality Assurance Manager, or Construction Manager directly involved in the management of construction quality at the project site. In addition, the CQC System Manager shall have completed the course entitled “Construction Quality Management for Contractors” within the last 5 years. Use the Government-furnished Resident Management System (RMS) – Contractor Mode to record, maintain, and submit various information throughout the contract period. RMS is a Windows-based program capable of operating on a stand-alone personal computer or on a network. The Government will make the quality control system (QCS) software available to the Contractor at time of notice to proceed. The project involves the development and management of Contractor furnished submittals for items such as pre-construction plans, product data, test reports, and contract close-out documentation as required by the technical specifications of the contract. Miscellaneous work within the project includes the delivery of As-Built Drawings, O&M Manuals, Contractor- Prepared Shop Drawings, and spare parts to the customer. Solicitation Number W912EF27RA002 will be posted to the SAM.gov approximately on around mid to late November 2026. The solicitation is a Request for Proposal Important Note: The SAM.gov Contract Opportunities Response Date listed elsewhere in this synopsis is for SAM.gov archive purposes only. It does not necessarily reflect the actual proposal due date. There is no response date included in this notice. The proposal due date and time will be contained in the solicitation and any solicitation amendments that are issued. Anticipated Award date is early to mid-March 2027. A site visit will be offered approximately 2 weeks after the solicitation is made available to offerors. See solicitation for details about the site visit. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with 1-551 stamp or attached INS Form 1-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form 1-151 or 1-551), Temporary Resident Card (INS Form 1-688}, Employment Authorization Card (INS Form l-688A}, Reentry Permit (INS Form 1-327}, Refugee Travel Document (INS Form 1-571}, Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B}. Send this information by email to leanne.r.walling@usace.army.mil and jani.c.long@usace.army.mil Foreign nationals must have received clearance prior to being granted access to the project site.
-Pre-Solicitation11/13/2026
The U.S. Army Contracting Command - Rock Island at Picatinny (ACC-RI-PICA), on behalf of the U.S. Army Combat Capabilities and Development Command (DEVCOM) Armaments Center (AC) is issuing this Request for Quote (RFQ) to competitively select and establish multiple Blanket Purchase Agreements (BPAs) for the Repair, Replacement, Modification, and Modernization of Conference Rooms, Digital Workplaces, and Audio Visual (AV) Systems. The goal of this effort is to ensure that various collaboration spaces, office spaces, classrooms, conference areas, and Audio Video Teleconference (VTC) rooms remain state-of-the-art as the U.S. Army continues to digitize its data and operations.
-Combined Synopsis11/30/2026

Additional Details

Solicitation Number

W911KB26RA039

Archive Date

Jun 23, 2027

Office Address

ANCHORAGE, AK, 99506-0898