GovChime
Notice ID: 1d35266cf2204c349468ae3bf833870bAward NoticeAwarded

CNC Engine Block Vertical Honing Machine

Awarded on May 31, 2022. Full description on SAM.gov.

Awarded tounder W911N222P0023 (source: SAM.gov award notice)• $133.2K

Overview

Posted
May 31, 2022
Notice type
Award Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)

Notice details

Place of performance
Chambersburg, PA, 17201
Last updated
Dec 4, 2025
Award date
May 31, 2022
Award amount (SAM.gov award notice)
$133.2K

Identifiers

Solicitation number
W911N222Q0018
Notice ID
1d35266cf2204c349468ae3bf833870b
Award number (PIID)
W911N222P0023

Description

Solicitation W911N222Q0018 (W911N222Q0018(1)) was awarded

Full description on SAM.gov

Award Overview

Award Number

W911N222P0023

Award Amount (SAM.gov award notice)

$133.2K

Award Date

May 31, 2022

Awardee

Awardee UEI

DFLUPJNWJ9J8

Original Solicitation

Notice ID: 1d35266cf2204c349468ae3bf833870b

Posted Date: May 31, 2022

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

1
  • W911N222P0052
    ROTTLER MANUFACTURING, LLC
    Department of DefenseNAICS 333517
    $148.0KSigned Jan 23, 2025

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W911N222Q0018
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. Pre-SolicitationJan 12, 2022

    CNC Engine Block Vertical Honing Machine

    Notice 68b3d0257bc4479ab36ba3c8d925ac2a on SAM.gov

  2. 2×
    SolicitationFeb 7, 2022

    CNC Engine Block Vertical Honing Machine

    Notice 7e7f2dadb56640bf9cd4c963737af6e5 on SAM.gov

  3. AwardedCurrentMay 31, 2022

    CNC Engine Block Vertical Honing Machine

    Notice 1d35266cf2204c349468ae3bf833870b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
CNC Vertical Grinder Machine
86%
Solicitation06/18/2026
The Arnold Engineering Development Complex (AEDC) at Arnold AFB in Tennessee (TN) is seeking sources interested and capable of meeting the Government’s requirement for two (2) new small CNC Vertical Milling Machines, as described in the Introduction paragraph below. CONTRACTING OFFICE ADDRESS: AFTC/PZIA (Arnold) Attn: Leslie R. McGowan 100 Kindel Drive Suite A332 Arnold AFB, TN 37389-1332 DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTATION / PROPOSAL (RFQ / RFP). THIS SOURCES SOUGHT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. INTRODUCTION: This is a Sources Sought Notice to determine the availability and technical capability of small and large businesses to meet the Government’s requirement for two (2) new small CNC Vertical Milling Machines. Refurbished or remanufactured parts are not authorized for this requirement. The technical specifications balance are provided in Attachment 1 – Technical Specifications-Small CNC Vertical Mill. The vendor shall provide all materials, labor, and equipment necessary. Delivery is required to Arnold AFB located in TN. The result of this market research will contribute to determining the method of procurement if a requirement materializes. Based on the responses to this Sources Sought Notice/Market Research efforts, the requirement may result in a sole source acquisition, it may be set-aside for small businesses (in full or in art), or may be procured through full and open competition. Provided below are the anticipated Contract Line Item Numbers (CLINs), Item Descriptions, Unit of Measure (UoM), and Estimated Quantities: CLIN ITEM DESCRIPTION UNIT QTY 0001 Small CNC Vertical Mill EA 2 NORTH AMERICAN INDSUTRY CLASSIFICATION SYSTEM (NAICS) CODE: The anticipated North American Industry Classification System Code (NAICS) for this requirement is 333517 Machine Tool Manufacturing. The anticipated Product Service Code (PSC) or this requirement is 3417, Milling Machines. Submission Details: Responses should include: Company Information: Name, address, telephone number point of contact names, an e-mail address. Business size. State whether your firm is a large business, small business, small disadvantaged business (SDB), 8(a)-certified small business, historically underutilized business zone (HUBZone) small business, veteran-owned small business (VOSB), service-disabled veteran owned small business (SDVOSB), or woman-owned small business (WOSB) based upon NAICS code 333517. Commercial and Government Entity (CAGE) Code. SAM.gov Unique Entity ID (UEI). Provide any feedback regarding Attachment 1 – Technical Specifications-Small CNC Vertical Mill. Contract vehicles that would be available to the Government for the procurement of the product, to include ENCORE II, General Service Administration (GSA), GSA MOBIS, NIH, NASA SEWP, Federal Supply Schedules (FSS), or any other Government Agency contract vehicle. (This information is for market research only and does not preclude your company from responding to this notice.) Interested businesses should submit brief capabilities as it relates to supporting the above requirement. To assist with budgetary estimates, please provide a total estimated price to meet this contemplated acquisition. The vendor’s response to this Sources Sought shall be electronically submitted to the Contract Specialist, Leslie R. McGowan, via email, and the Contracting Officer, Ms. Erica A. Anglin: Emails: leslie.mcgowan@us.af.mil and erica.anglin@us.af.mil. Email Subject Line Reference: Sources Sought – Small CNC Vertical Mill Small CNC Vertical Mill Response Date: 6 November 2026, 10:00 AM CST DO NOT SUBMIT CLASSIFIED MATERIAL. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from release outside the Government and technical team. Attachment(s): Attachment 1 – Technical Specifications- Small CNC Vertical Mill
78%
Market Research11/06/2027
The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.
69%
AwardedOpen
he government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.
69%
AwardedOpen
**Amendment 0003 posted to extend due to 17 June 2026 at 10:00 AM CST and provide revised Statements of Work.** The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.
69%
Solicitation06/17/2026

Additional Details

Solicitation Number

W911N222Q0018

Archive Date

Jun 15, 2022

Office Address

CHAMBERSBURG, PA, 17201-4150