GovChime
Notice ID: ef96b85853e04be08d632d16543c297dSolicitation

Ion Nitride for M256 Breech Block for Watervliet Arsenal. Watervliet, New York

Archived on June 28, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM UTC−04:00
Posted
June 6, 2023
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
332811: Metal Heat Treating
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC WVA
Last updated
Sep 9, 2025

Identifiers

Solicitation number
W911PT23Q0062
Notice ID
ef96b85853e04be08d632d16543c297d

Description

43 EACH - PERFORM THE ION NITRIDE PROCESS ON THE 120MM M256 BREECHBLOCK - ADL PER NOTES #2 & #3 OF DRAWING 12528572 SHEET #1 REV A & QAP REV A. ESTIMATED 7 LOTS WITH SIZE RANGING FROM 3 TO 11 EACH. PER SOW # 82473162 66 EACH - PERFORM THE ION NITRIDE PROCESS ON THE 120MM M256 BREECHBLOCK - ADL PER NOTES #2 & #3 OF DRAWING 12528572 SHEET #1 REV A & QAP REV A. ESTIMATED 17 LOTS WITH SIZE RANGING FROM 2 TO 4 EACH. Per SOW # 83198247 25 EACH - PERFORM THE ION NITRIDE PROCESS ON THE M35 CRANK - ADL PER NOTES #3 OF DRAWING 11583827 REV A REDLINE. ESTIMATED 7 LOTS WITH SIZE RANGING FROM 2 TO 4 EACH. Per SOW # 83307489

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W911PT23Q0062
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentJun 6, 2023

    Ion Nitride for M256 Breech Block for Watervliet Arsenal. Watervliet, New York

    Notice ef96b85853e04be08d632d16543c297d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Salient Characteristics: Thermion 71000-4.8 VS Feeder Assembly Part Description: 71000-4.8 VS Feeder Assembly 4.8 with VS Technology With Lubricating System Manufacturer: Thermion Associated System: Precision Arc 4.8 Twin Wire Arc Spray System 1. General Overview The Thermion 71000-4.8 VS Feeder Assembly is a core component of the Precision Arc 4.8 high-production twin wire metalizing system. It is specifically designed to feed large-diameter spray wires (such as zinc, aluminum, and zinc/aluminum alloys) smoothly and consistently in ultra-high production, industrial, and field environments. 2. Essential Physical and Design Characteristics ? Modular Construction: Features a in. plug-and-play in. factory-built design, allowing for quick, toolless connections. Each fitting is uniquely keyed to eliminate connection errors. ? Detachable and Portable: The feeder can be detached from its standard cart mount, making it suitable for use in highly confined spaces and small entrance areas(down to 24 inches). ? Heavy-Duty Components: Constructed with heavy-duty, high-temperature machine components designed to withstand harsh shop or field environments.? Ergonomics and Safety: Includes an exclusive ergonomic handle design to reduce operator fatigue and a non-latching trigger that acts as a dead-man switch for instant emergency shutdown. 3. Essential Functional and Performance Characteristics ? Wire Compatibility: Capable of running 3/16 in. (4.8 mm) diameter spray wires, yielding extremely high deposition rates (e.g., up to 190 lbs./hr. for Zinc). Change-over kits can adapt the system for other sizes like 1/8 in., 3/32 in., 2mm, or 1/16 in.. ? VS Technology (Arc Voltage Drive / Variable Speed): Utilizes automated wire feed control technology to automatically adjust wire feed speed, maintain a perfect arc, eliminate arc shorting, and prevent coating defects caused by sputtering. ? Lubricating System / Friction Reduction: Equipped with advanced, long-life wire drive assemblies featuring sealed roller bearings and roller bearing inlet guides. This low-friction mechanism mitigates drag on the wires as they enter the feeder, ensuring a smooth, non-slip feed without dry-friction binding. ?Integrated Wire Straighteners: Heavy-duty wire straighteners are built into the drive assembly. These self-adjusting mechanisms remove the helix or kinks from spooled wire, ensuring flawless delivery to the spray head. ? Remote Control Accessibility: Features remote amperage and voltage meters with integrated control mechanisms located directly at the feeder, allowing operators to make adjustments without returning to the main power supply. 4. System Compatibility and Operating Requirements ? Power Supply: Designed to integrate with a 650 Amp, 100% duty cycle power supply (such as the Thermion DIM-650). ? Control Box Compatibility: Pairs with Thermions modular control boxes (e.g.,71097-ASSY). ? Air Consumption: Requires 90-110 psi at 60 cfm (using a 1/2 in. IPS/NPT connection) for optimal atomization and functionality.
40%
Combined Synopsis08/13/2026
Commercial Laser Engraver
40%
Combined Synopsis03/25/2026
Centrifugal Filtration System
40%
Combined Synopsis02/26/2026
Purchase of Gold Recruiter rings. See the attach combined Synopsis/Solicitation for part numbers and quantity. Please return a completed Buy American Act with your quote.
40%
Combined Synopsis01/22/2026
Rock Island Arsenal is seeking qualified vendors to do the following: DESIGN AND BUILD HEAT TREAT COIL FOR PART NO 10922973 - SEE HEAT TREAT NOTE 3. NOTE: AN APPROVAL DRAWING MUST BE SUBMITTED PRIOR TO BUILD. COIL MUST WORK WITH FIXTURE 10922973-4 AND TOCCO LIFT TABLE SERIAL NO 88-2497-32 - RIA33193. SEE ATTACHED PART DRAWING 10922973 AND FIXTURE DRAWING 10922973-4. FINAL DELIVERABLES MUST INCLUDE A COMPLETE COIL TOOL DRAWING AND 3D MODEL. Drawings are distribution D, therefore vendors must be active in the Joint Certification Program to view them. Interested vendors shall provide a capabilities statement and a rough estimate of how long completion would take.
39%
Market Research11/18/2026

Additional Details

Solicitation Number

W911PT23Q0062

Archive Date

Jun 28, 2023

Office Address

WATERVLIET, NY, 12189-4000