Notice ID: f644f4535b284cb186ffe1c765ecaa46Presolicitation
66--NOTICE OF INTENT TO SOLE SOURCE - One (1) Room Temperature Bore Superconducting Magnet System ReCon
Archived on December 8, 2014. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 7:00 AM UTC+02:00
- Posted
- October 9, 2014
- Notice type
- Presolicitation
- NAICS
- 334513: Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QK ACC-APG ADELPHI
- Place of performance
- ACC-APG - Adelphi ATTN: AMSRD-ACC, 2800 Powder Mill Road Adelphi MD 20783-1197 US
- PSC
- 66: INSTRUMENTS AND LABORATORY EQPT
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- W911QX15T0009
- Notice ID
- f644f4535b284cb186ffe1c765ecaa46
Description
The United States Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1, Only One Responsible Source can satisfy agency requirements The Government intends to solicit and negotiate with American Magnetics, 112 Flint Road, Oak Ridge, TN 37831-2509. This notice of intent is not a request for competitive proposals. However, any responsible source who believes it is capable of meeting the requirement may submit a capability statement, proposal, or quotation, which shall be considered by the agency, only if received by the closing date and time of this notice. A determination not to compete the proposed requirement based upon the responses to this notice is solely within the discretion of the Government. Responses to this notice are due on or before 11:59PM on 10/20/2014 by email at cristina.m.watkins.civ@mail.mil. Point of Contact for this notice is Cristina M. Watkins, (301) 394-2529, cristina.m.watkins.civ@mail.mil.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Cristina M. Watkins, 301-394-2529 ACC-APG - Adelphi
Documents
No documents available.
Lifecycle
Solicitation:
W911QX15T0009- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- Pre-SolicitationCurrentOct 9, 2014
66--NOTICE OF INTENT TO SOLE SOURCE - One (1) Room Temperature Bore Superconducting Magnet System ReCon
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Notice ID: W912DR27XC1S4 NAICS Code: 334513 – Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variable Size Standard: 750 employees THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTE, OR BID. NO AWARD WILL BE MADE FROM THIS SOURCES SOUGHT. THE GOVERNMENT WILL NOT REIMBURSE RESPONDENTS FOR ANY COSTS INCURRED FOR THEIR PARTICIPATION IN THIS SOURCES SOUGHT. ALL RESPONSES WILL BE USED TO DETERMINE THE APPROPRIATE ACQUISITION STRATEGY FOR THE POSSIBLE FUTURE ACQUISITION. The U.S. Army Corps of Engineers (USACE), Baltimore District (NAB), seeks to determine the interest, availability, and capability of potential sources to satisfy controls and instrumentation supplies and incidental service needs of the Washington Aqueduct (WA). This Sources Sought Notice is one facet of the Government’s overall market research strategy. No acquisition strategy will be determined based solely on the information received from this Sources Sought Notice. Both small and large businesses are highly encouraged to respond in this Sources Sought. Background The WA is a public water supply agency that produces an average of 135 million gallons of water per day at two treatment plants located in the District of Columbia. The mission of the WA is to collect, purify, and pump an adequate supply of water to its wholesale customers — DC Water, Arlington County, and Fairfax Water. The place of performance/delivery is the WA’s Dalecarlia and McMillan Water Treatment Plants in Washington, D.C. Requirement Description NAB intends to satisfy controls and instrumentation supplies and incidental service needs of WA by awarding a target of three (3) firm-fixed price Blanket Purchase Agreements (BPAs). Each BPA will have a five (5) year ordering period. NAB anticipates utilizing the source selection procedures outlined in Revolutionary FAR Overhaul (RFO) part 12 – Acquisition of Commercial Products and Commercial Services. Scope Industrial process electronic measuring instruments used for monitoring and controlling water treatment and transmission operations, including multiple proprietary brands to ensure compatibility with current equipment. Brand names required: Endress + Hauser, Rockwell Automation, Schweitzer Engineering, Allen Bradley, ABB, Eaton, Toshiba, Hach, Lovibond, In-Situ ChemScan, Swan Analytical, Benchmark Measurement, Limit Torque, Auma, Rotork, Trident Valve, Accusonic, Precision Digital, Teledyne Meridan, SignalFire, Siemens, Johnson Controls, and Reliable Controls. Services that may be in a BPA call include but are not limited to: preventative maintenance and repair services for uninterruptable power supply systems; fiber optic cable installation, testing, and repair; and installation, configuration, commissioning and training of supplies. Master dollar limit: $5,000,000.00 Call limit: $350,000.00 Capabilities General Information Company Name Commercial and Government Entity (CAGE) code Unique Entity Identifier (UEI) Company Address Point of Contact (Name, Title) Phone Number Email Address Indicate your business size based on NAICS code 334513, which has a size standard of 750 employees. If applicable, please indicate if your business falls into any or a combination of the following categories: Small Business 8(a) small business Historically underutilized business zone (HUBZone) Service-disabled veteran-owned small business (SDVOSB) Woman-owned small business (WOSB) Provide a description of your capabilities for providing the controls and instrumentation supplies and services above. Additionally, please include at least two (2), but no more than three (3), examples of past contracts or orders providing controls and instrumentation supplies and services. The examples should include the amount of the order, date, delivery location and customer, and types of supplies. Provide a point of contact that would serve as the BPA account manager for your company. What is the primary nature of your business? (e.g. manufacturer, authorized distributor, third-party seller, etc.)? Provide details regarding your service delivery area, as well as your experience in providing supplies to customers in the Washington DC region. Provide details on your ability to deliver products from receipt of order within specified timeframes. Do you have an online catalog and/or ordering portal? Response Submission Submit your response no later than 12 November 2026 at 2:00 PM Eastern Standard Time (EST) by completing the form linked below: https://forms.osi.apps.mil/r/H8uLJuht5n Questions If there are general questions as you prepare a response, please contact Kennedy Vila, Contract Specialist at KennedyLuther.S.Vila@usace.army.mil and include Angela Padua, Contracting Officer at Angela.S.Padua@usace.army.mil. Comments will be shared with the Government project team, but otherwise will be held in strict confidence. | - | Market Research | 11/12/2026 |
12 NOV 2026 - The purpose of this revision is to incorporate the additional questions from industry after the posting of Revision 1 of the RPP. The additional questions and answers are titled W91CRB-RPP-USHC_QAs_Rev1 12 NOV 2026. ***************************************************************************************************************************************************** 4 NOV 2026 - The purpose of this revision is to incorporate Revision 1 of the RPP, upload the Questions and Answers and to extend the offeror due date to 1600 EST, 20 November 2026. With the incorporation of this revision, final questions are due NLT 1600 EST, 9 November 2026. A follow on Questions and Answers for this period will be uploaded shortly after 9 November 2026. Three attachments will be uploaded in this RPP revision: 1) W91CRB-RPP-USHC_Rev 1 - changes are highlighted in red font to the following sections of the RPP: Sections 2.4, 5.1 & 5.2 2) W91CRB-RPP-USHC_QAs - .pdf containing 10 questions and answers 3) W91CRB-RPP-USHC_QAs_Cont. - Excel spreadsheet containing remaining questions ****************************************************************************************************************************************************** The Portfolio Acquisition Executive (PAE) Maneuver Ground Project Manager (PM) Maneuver Medical Devices (M2S) is issuing this Request for Prototype Proposals (RPP) to solicit solutions for an Ultrasound Diagnostic System, Hand Carried (USHC). The U.S. Army requires a Commercial-Off-The-Shelf (COTS) or Non-Developmental Item (NDI) hand-carried ultrasound device capable of supporting medical operations in austere Role of Care (ROC) 3 environments with little to no modification. The selected vendor(s) will deliver two (2) prototype units for operational and environmental testing (MIL-STD-810H). The solution must be FDA cleared for human use, Trade Agreements Act (TAA) compliant, and operate on standard CONUS/OCONUS power infrastructures. In accordance with 10 U.S.C. § 4022(f), the Government advises all offerors that a noncompetitive follow-on production contract or transaction may be awarded to the participant(s) of this Prototype Other Transaction Agreement (OTA) without the use of competitive procedures Submission Instructions: Proposals must be submitted via DoD SAFE file transfer or secure email. Submit to: Timothy Compton, Agreements Officer (timothy.j.compton7.civ@army.mil) Copy to: Roxanne A. Dalrymple, Agreements Specialist (roxanne.a.dalrymple.civ@army.mil) Please see attached. | - | Solicitation | 11/20/2026 |
Request for Preproposals for Vehicle Integrated Platform Enhanced RADIAC (VIPER): Non-GM Alternative Sensor Prototype for Tracked Tactical Ground Vehicles This requirement will be handled through the procedures established in the Broad Other Transaction Authority Announcement (BOTAA) Supporting Other Transaction Authority Agreements for Prototype Development Efforts for the JPEO CBRND – Combating Weapons of Mass Destruction (“JPEO-CBRND CWMD BOTAA-24-01”). Please review the BOTAA announcement and submission requirements in full prior to submitting a Pre-Proposal. Ensure that your submission references “CWMD BOTAA-24-01 VIPER_27-TRACK." Link to BOTAA: https://sam.gov/workspace/contract/opp/2d04622b25364669857a6a61c576ade9/view Pre-proposals are due no later than 12:00 PM EST on December 10, 2026. The full request for pre-proposals is attached to this posting. | - | Pre-Solicitation | 12/10/2026 |
The Defense Logistics Agency-Aberdeen, on behalf of the Army Integrated Logistics Supply Center (ILSC) – Supply Chain Management Directorate (SCMD) – Strategic Sourcing Directorate (SSD), intends to acquire Parts for Doppler GPS Navigation System. Requirements Description: The United States Army is looking for sources with the ability to provide parts for the Doppler GPS Navigation System. The items to be procured for the Doppler GPS Navigation System . The Government does not possess specifications or detailed drawings for the referenced system. The Government does not possess the technical data package (TDP) for the parts. Background Information: Previous Contract/Order No. W15P7T-13-D-E013 The following additional NAICS apply: 334220, 334413, 334416, 334418, 334419, 336413, 336319 Items and/or Services to Be Procured under a Single Award IDIQ: NSN: 5895-01-518-8783 NOMENCLATURE: CONVERTER SIGNAL DA PART NUMBER: P320A002-02 NSN: 5998-01-530-3442 NOMENCLATURE: CIRCUIT CARD ASSEMBLY PART NUMBER: H274A112-01 NSN: 5895-01-653-0833 NOMENCLATURE: CONVERTER SIGNAL DA PART NUMBER: P320A002-04 Requested Response Information: We request that sources who can manufacture the listed parts or services submit information to show their capability to manufacture the same part. At a minimum the support information you submit should include, but is not limited to, the following types of documentation: Questionnaire, drawings, test results, information on previous Government and commercial contracts, data rights, etc. In your response, please include your company name, CAGE code, and a technical point of contract with email address and telephone number. Notice, Response Due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse any costs associated with the preparation of responses to this SSA. This Sources sought announcement (SSA) is for planning and market research purposes only and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the DLA Aberdeen Small Business Office. Contractor Questionnaire Please complete the following questions. If a question does not apply, please enter N/A or non-applicable. 1. Provide a brief summary of your company and its core competencies. 2. Please provide the following Point of Contact information on all responses: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3. Describe your Company's past performance in the manufacturing and/or supplying of Power Supply and Circuit Card Assembly in the past. Provide Contract Number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort. 4. Describe the qualifications of your engineering staff who have experience in the design and production of supplies similar in complexity and technology to power supplies, circuit cards, data processors, and other electronic items. 5. Describe your company's experience in identifying the test equipment for components similar in complexity and technology to what is used in the listed items to include power supplies and a circuit card assembly. 6. Describe your company's experience and process for managing obsolescence issues. 7. Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). 8. Describe your company's experience in identifying alternatives for unavailable or obsolete materials or components to mitigate obsolescence issues. 9. Discuss your company's capability to meet US Government delivery requirements for this specific product. 10. The Government prefers Spot Buy. Can your company meet the Government preference. If not, please describe what you are willing to provide. 11. The Government prefers Fixed Quantity. Can your company meet the Government preference. If not, please describe what you are willing to provide or what you would prefer to provide. Please explain. 12. Do you have product(s) or keep products in stock? 13. Are there any vendors in your supply chain that you are concerned would prevent you from meeting the Government delivery schedule? – If so, please describe the company and what steps you are taking or have taken to mitigate. If it is a Government-directed source, please describe any other vendors that may have the capability to meet the delivery schedule. | - | Market Research | 11/26/2026 |
The Joint Product Manager for Chemical, Biological, Radiological and Nuclear (CBRN) Sensing (JPdM CS), under the Joint Project Manager for Chemical, Biological, Radiological and Nuclear Integrated Early Warning (JPM CBRN IEW), under the Portfolio Management Executive Chemical, Biological, Radiological and Nuclear Defense (PME CBRND) within the Department of War (DoW), is conducting market research to identify potential industry sources capable of providing a Biological Warfare Agent (BWA) identification capability for integration into the U.S. Navy's Enhanced Maritime Biological Detection (EMBD) system. As a backward-compatible replacement for the Joint Biological Point Detection System (JBPDS) Identifier, the EMBD Identification Subsystem (IDS) automatically provides confirmatory identification of Biological Warfare Agents (BWAs) in liquid samples. In operation, the EMBD Collector gathers the sample externally and routes it to the IDS via the EMBD Fluid Transfer System (FTS). Please see the attached formal Request for Information (RFI) for full details. | - | Market Research | 12/07/2026 |
Additional Details
Solicitation Number
W911QX15T0009
Archive Date
Dec 8, 2014