GovChime
Notice ID: a26aa59848824bb698324031c4903ae4Sources Sought

Sources Sought for one (1) each Computer Numerical Control (CNC) Lathe

Archived on May 30, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM UTC−04:00
Posted
May 11, 2020
Notice type
Sources Sought
NAICS
333517: Machine Tool Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-APG ADELPHI
Place of performance
Aberdeen Proving Ground, MD
Last updated
Dec 4, 2025

Identifiers

Solicitation number
W911QX20Q0107
Notice ID
a26aa59848824bb698324031c4903ae4

Description

A. Objective: To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. The Government requires one (1) each small-footprint, fully-automated, Computer Numerical Control (CNC) lathe that meets the following minimum specifications: Note: All dimensions, specifications are given in a range format in which the operating characteristics of the machine must fall. Physical Characteristics Work Area General Requirements Distance Between Centers Range of 15 to 25 Height of Centers Range of 4 to 6 Swing Over Bed Range of 8 to 12 Travel of Cross-Slide 4 to 8 Travel of Top-Slide - .1 to 1 Top-Slide Rotation - 360 Headstock Spindle Through Hole Range of 1 to 2.5 Rotational Accuracy No greater than 0.0005 (or angular equivalent) Unsupported Cylindrical Turning @ 100mm No greater than 0.0005 Motor/Power Requirements Voltage 110V, 50/60Hz is preferred. 208-230V, 50/60Hz will be considered as long as machine can run through a transformer to 110V. Power Consumption Minimum 1HP, Maximum 3.5HP (Machines in this power range shall fall in our physical footprint requirements, higher HP machines will be too large for our lab space.) Spindle Speed Operating Range Between 25 and 60,000 rpm. Speeds shall be infinitely variable within this range. Feed Requirements Automatic Feed Rate Between 0.0020 and 0.0075 inches/revolution. X and Z Axis Path Feed Rate Between 0.01 and 100 inches per minute. Ball Screw Precision Accuracy - +/- 0.0010 or better. Manual Thread-Cutting Range Between 7 and 44 TPI (threads per inch). Thread-Cutting Programmability Required Tailstock Requirements Spindle Travel Distance Range of 1.5 to 4 . Lateral Displacement - +/- 0.050 or better Controller Requirements Stand-alone PC with touchscreen monitor, or integrated Siemens 808 type controller or equivalent. Machine Footprint Width Between 48 and 84 Depth Between 24 and 44 Height Between 18 and 84 Weight Maximum of 1,500 lbs. Additional Characteristics Chuck Size 3 to 6 Diameter 3-Jaw Chuck Coolant Through-the-spindle (TTS) is optimal, but conventional coolant capability is acceptable C. Responses: All interested parties should notify this office via e-mail within the posted date. Responses shall include: I. To what extent each of the specifications can be met. II. Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 500 people standard that accompanies NAICS code 333517. If a small business, you must also list any small disadvantaged status you hold [HUB Zone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. III. experience/ performance through the description of completed projects. Responses to this sources sought are due no later than 12:00pm eastern standard time 05/15/2020. Submissions should be emailed to Brianna Murphy at Brianna.murphy.ctr@mail.mil. Questions concerning this sources sought may be directed to Brianna Murphy at brianna.murphy.ctr@mail.mil. Please be advised that .zip and .exe files cannot be accepted.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W911QX20Q0107
  1. Market Research

Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)

  1. Market ResearchCurrentMay 11, 2020

    Sources Sought for one (1) each Computer Numerical Control (CNC) Lathe

    Notice a26aa59848824bb698324031c4903ae4 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

W911QX20Q0107

Archive Date

May 30, 2020

Office Address

ADELPHI, MD, 20783-1197