Notice ID: 5fbf238edc434cf5830bde94d065c765Combined Synopsis/Solicitation
SMALL BUSINESS SET-ASIDE FOR HIGH-TEMPERATURE GAS HUMIDIFICATION SYSTEM
Archived on September 11, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM UTC−04:00
- Posted
- August 23, 2021
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 334512: Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QK ACC-APG ADELPHI
- Place of performance
- Aberdeen Proving Ground, MD, 21005
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W911QX21Q0209
- Notice ID
- 5fbf238edc434cf5830bde94d065c765
Description
The contractor shall provide one (1) turn-key high-temperature gas humidification system that meets or exceeds the following requirements: The system shall be capable of humidifying air from one (1) to 100.0 % relative humidity (%RH), with an accuracy of five percent (5%) RH or better. The system shall be capable of flowing humidified air at temperatures from ambient to 150 degrees Celsius ( C) or higher, with an accuracy of five degrees Celcius (5 C) or better. The system shall be capable of flowing humidified air from one (1) to two (2) Liters per minute or higher, with an accuracy of five percent (5%) of the reading or better. The system shall produce humidified air at output pressures of nine (9) bar or higher with variable output pressure option with an accuracy of 0.25 bar or better. The system shall have an external humidity sensor allowing for control of humidity in a separate chamber. The system shall be capable of accepting compressed air input up to 125 pounds per square inch, actual (psia) through a -inch quick-connect, Swagelok compression fitting, or National Pipe Thread (NPT) connector. The system shall be capable of accepting deionized water at supply pressures up to 35 psia through a -inch quick-connect, Swagelok compression fitting, or NPT connector. The system shall output humidified air through a -inch Swagelok compression fitting or NPT connector. The system shall be capable of remote control and digital output of system settings through a RS232, RS485, or RJ45 connection. The system shall be mountable with appropriate mounting brackets for laboratory setup
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W911QX21Q0209- Combined Synopsis
- 2×Combined SynopsisCurrentAug 12, 2021
SMALL BUSINESS SET-ASIDE FOR HIGH-TEMPERATURE GAS HUMIDIFICATION SYSTEM
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
W911QX21Q0209
Archive Date
Sep 11, 2021
Office Address
ADELPHI, MD, 20783-1197