Notice ID: 8516c27e76334703affaca6835d5ae5fCombined Synopsis/Solicitation
One (1) Sliding Table Saw - Format-4 Kappa 450 with Preventive Contact System (PCS) safety system
Archived on January 3, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−05:00
- Posted
- December 12, 2023
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 333243: Sawmill, Woodworking, and Paper Machinery Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QK ACC-APG ADELPHI
- Place of performance
- Aberdeen Proving Ground, MD, 21005
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W911QX24Q0030
- Notice ID
- 8516c27e76334703affaca6835d5ae5f
Description
Qty one (1) Sliding Table Saw - Format-4 Kappa 450 with Preventive Contact System (PCS) safety system. The Government requires one (1) Sliding Table Saw in accordance with the following specifications: Shall have a large cutting height of up to 155 millimeters at 90 degree and 109 millimeters at 45 degrees Shall have a saw blade diameter of 250-450 millimeters Shall have a saw blade tilt of 0 degree to 45 degrees Shall have non-contact triggering safety device that protects the operator form being injured by the blade and does not damage the blade if activated. Shall have a guiding system with a cutting length of 2500 millimeters Shall have a rip capacity of 800 millimeters Shall have a telescopic crosscut fence to perform cross cuts up to 3200 millimeters Shall have a crosscut fence that can move from 90 degrees to 45 degrees and has two (2) fence stops as standard Shall have a fixed reference position provided at 90 degrees Shall have a scoring unit Shall have a rise and fall of the scoring blade that is automatic Shall have a max saw blade diameter without the scoring blade of 450 millimeters Shall have a sliding table cutting length of 3200 millimeters with edging shoe Shall have three (3) tungsten carbide tip fine sizing saw blades with the following dimensions; overall diameter of 350 millimeters, tungsten tooth width of 3.5 millimeters, blade thickness of 2.5 millimeters bore diameter of 30 millimeters Shall have one (1) tungsten carbide tip flat-trapezoidal tooth saw blade with the following dimensions; overall diameter of 350 millimeters, tungsten tooth width of 3.5 millimeters, blade thickness of 2.5 millimeters, bore diameter of 30 millimeters Shall have one (1) adjustable tungsten carbide tip scoring saw blade with the following dimensions; overall diameter of 120 millimeters Shall include delivery Shall include installation Shall include set up and training for shop employees Shall include training for Shop employees Shall include freight, shipping and handling to Aberdeen Proving Ground Shall include 1-year warranty
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W911QX24Q0030- Combined Synopsis
- Combined SynopsisCurrentDec 12, 2023
One (1) Sliding Table Saw - Format-4 Kappa 450 with Preventive Contact System (PCS) safety system
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
vertical panel saw | 72% | Combined Synopsis | 08/12/2026 |
CAPE Woodworking Machinery Carousel Block Saw Model TC10 Fully mechanical, automatic, carousel type block-cutter machine to cut blocks for pallets with 10 vertical magazines. Needs to Automatically separate sawn blocks from trim and waste cuts. Needs to include discharge conveyor. Must meet following specifications: Saw blade motor: 10 Hp Power motor and reducer infeed: .75 Hp Power motor and reducer waste belt: .33 Hp Rotating saw speed: 3,000 RPM Height cutting size: 70 ? 190 mm Max cutting size: 70 X 145 mm. Numeric counter for blocks cut. First cut (clean-cut) to square the stringer automatically. Aspiration diameter: 100 mm. Production approx.: 3,500 blocks/hour. Automatic selection to evacuate the last cut. 450 mm diameter blade is included. Component Brands: Motors and Gearboxes: SEW, BONFIGLIOI, ROSSI Electric and Electronic: Telemecanique and SEW Pneumatic : SMC | 47% | Combined Synopsis | 12/09/2025 |
Diehl Machines SL65-56 WA Wide-Arm Straight Line Rip Saw.56 inch throat clearanceCast iron spindle housing with belt drive and automatic brakeDual feed chain and pressure beam designed saw208V, 3PH, 60 Cycle20HP belt driven saw arbor motor with automatic brake3 hp feed drive motor w/AC inverter for 75-200 FPM variable feed speedCapacity 3/8 in. to 4-1/4 in.Worktable with 56 inch on the right and 30 inch on the left side of the bladeAutomatic electro-pneumatic feed chain lubrication systemHeavy duty stock guideUpper and lower kickback fingersPressure beam side guardVertical adjustment on saw arborLine reactor to protect inverter from power surges, 208V applicationOne (1) 3/16 in. Kerf, 24 tooth saw blade, 18 in. diameterAutomatic raising and lowering of lower kickback fingers - Single SensorLow level oil shut downCatenary GuardNEMA TYPE 12, Operator control panel and fasciaFitted with a machine hour meter | 47% | Combined Synopsis | 12/09/2025 |
Circular Saw | 41% | Combined Synopsis | 10/28/2026 |
Amended to add Set aside code. Refrigerated Sliding Door merchandiser | 41% | Combined Synopsis | 10/16/2026 |
Additional Details
Solicitation Number
W911QX24Q0030
Archive Date
Jan 3, 2024
Office Address
ADELPHI, MD, 20783-1197