Notice ID: 26e964dfbe8245ea8b736d7ae25a08cdPresolicitation
NOTICE OF INTENT TO SOLE SOURCE - Human Systems Integration (HSI) Services for Army Systems (Amendment)
Archived on August 23, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM UTC−04:00
- Posted
- August 1, 2024
- Notice type
- Presolicitation
- Set-aside
- SBA Certified Women-Owned Small Business (WOSB) Program Sole Source (FAR 19.15)
- NAICS
- 541990: All Other Professional, Scientific, and Technical Services
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QK ACC-APG ADELPHI
- Place of performance
- Adelphi, MD, 20783
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W911QX24R0035
- Notice ID
- 26e964dfbe8245ea8b736d7ae25a08cd
Description
See attached Synopsis and PWS.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W911QX24R0035- Market Research
- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- Pre-SolicitationJul 18, 2024
NOTICE OF INTENT TO SOLE SOURCE - Human Systems Integration (HSI) Services for Army Systems
- Market ResearchJul 18, 2024
Human Systems Integration (HSI) Services for Army Systems
- 2×Pre-SolicitationCurrentAug 1, 2024
NOTICE OF INTENT TO SOLE SOURCE - Human Systems Integration (HSI) Services for Army Systems (Amendment)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
SPECIAL NOTICE AMENDMENT 2/24/2026 (updated to change AFC to T2COM and add a note about not including proprietary information) AMENDMENT 2/25/2026 (updated to fix spacing issues in announcement) Synchronized Persistent Army Experimentation (SPARX) A. Description: Synchronized Persistent Army Experimentation (SPARX) is a collaborative process between industry partners and the Army that is intended to enable collective innovation and identify novel technology capabilities that will help the Army achieve its modernization goals. It provides a structured means for collection of questionnaires about products and technologies to Government representatives for consideration to a variety of controlled and operationally relevant experimentation environments. It is part of the Transformation and Training Command (T2COM) campaign of learning, which is designed to aggressively advance and integrate the Army’s contributions to the Joint and Multi-national force for convergence effects across all domains (air, land, sea, space, and cyberspace) in order to maintain U.S. overmatch. SPARX is a process to match industry partners’ technologies to a series of experiments and observations in operationally realistic environments. Developed and managed by the Combat Capabilities Development Command (DEVCOM), the SPARX process will allow for collective innovation and further experimentation in both applied and advanced technology developments with innovative partners. SPARX will serve as the principal entry point for industry partners to provide information relating to their technologies for Army experimentation. This process is designed to do the following: 1. Synchronize and streamline the information process for industry to then obtain information for Army experimentation events. It provides an avenue for industry partners to submit information regarding their technologies via a technology overview template. 2. Make it easier for event holders to include industry technologies into their events by ensuring all submission documents are readily available with an early technology assessment. SPARX is currently participating with multiple experimentation events. Submissions will be reviewed by Subject Matter Experts (SMEs) from across T2COM. The SMEs will conduct an initial informal examination of the technology DEVCOM will inform the submitting Industry Partner of the event(s) (if any) to which the technology has been aligned. Once aligned to an experimentation event, technology submissions will be forwarded to the event planners during the event open window. These events are developed and managed by the Army event planners As such, if a technology is invited to an experiment the event planner will coordinate all the requirements for participation. Events are not hosted by DEVCOM HQ and if an industry partner attends such an event they should expect further guidance from the event planner or host. It is possible that further documentation (i.e. NDA, proof of liability insurance, etc.) may be required by the event host/planner. B. Submission Guidelines: Prospective companies are requested to submit a SPARX Technology Overview (attachment). The submission documents into the SPARX Collection will also serve as the submission documents into the aligned Army experimentation event(s). NOTE: DO NOT SUBMIT PROPRIETARY INFORMATION. Submissions of SPARX Technology Overview documents should be sent to: sparx@army.mil Submissions may be submitted at any time while this notice is open. If an event submission window has closed for that fiscal year, your technology submission will be considered for the following fiscal year. THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the Army is not at this time seeking proposals and will not accept unsolicited proposals. Respondees are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. | 52% | Special Notice | 04/14/2030 |
Scope of Operations & Capabilities: Demonstrate capability to deliver all required services detailed in Section 5.0 (Requirements) of the PWS, including: Operating and maintaining a 24/7/365 toll-free intake hotline and online support (PWS 5.1.1). Providing timely referral services to qualified local providers within 60 miles of employee duty locations or homes of record throughout the State of Illinois (PWS 5.1.3 & 5.1.4). Providing up to five (5) counseling/coaching sessions per issue per employee, delivered by experienced and licensed counselors, with no extra billing (PWS 5.2.1 & 5.2.2). Timely quarterly usage and tracking reporting delivered to the COR within 30 calendar days of quarter end (PWS 5.3.1). | 48% | Solicitation | 12/14/2026 |
THIS IS A SOURCES SOUGHT SYNOPSIS FOR INFORMATIONAL AND PLANNING PURPOSES ONLY. THIS IS A SOURCES SOUGHT SYNOPSIS FOR INFORMATIONAL AND PLANNING PURPOSES ONLY. This notice does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. The Government is not seeking proposals at this time. NO PROPOSALS ARE BEING REQUESTED OR ACCEPTED IN RESPONSE TO THIS NOTICE. OTHER THAN SMALL BUSINESS AND SMALL BUSINESS RESPONSES ARE ENCOURAGED FOR THIS SOURCES SOUGHT NOTICE. This announcement does not obligate the Government to award a contract, nor does it obligate the Government to pay for any preparation costs. The information provided in this notice is subject to change and does not bind the Government. Interested sources are discouraged from submitting commercial literature in response to this notice. Any submissions of such product literature or catalog cut sheets will be treated separate from, and will have no bearing on, any subsequent evaluation of proposals submitted in response to any resulting future formal Request for Proposal (RFP). AGC has not made a commitment to procure any of the products or services discussed, and the release of this notice should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. AGC will not pay for information or comments provided and will not recognize any costs associated with submission of comments. All submissions become Government property and will not be returned. The Government anticipates a Single Award Indefinite Delivery/ Indefinite Quantity (ID/IQ) contract and Sample Task Order. Background: The US Army Geospatial Center’s (AGC) Three-Dimensional High Speed-High Altitude Mapping Operations & Technology Integration (3DH2-M O&TI) program provides timely, accurate and relevant High Resolution Three-Dimensional (HR3D) Data to enable geospatial information, capabilities, and domain expertise for the Army Geospatial Enterprise implementation and Geospatial Data Fabric. The 3DH2-M mission provides critical information to the Warfighter in all Domains and in all Combatant Commands (CCMDs). The purpose of the 3DH2-M mission is to collect, process, disseminate, store, and maintain data collected by conducting wide area high altitude flight operations. Processed 3DH2-M data serves as foundational geospatial data products for the Department of Defense (DoD), Coalition Partners, and Host Nations. Data collection is primarily Outside of the Continental U.S. (OCONUS) with some in the Continental U.S. (CONUS). The data provided from 3DH2-M supports Government efforts for terrain analysis, change detection, threat analysis, intelligence preparation of the battlefield (IPB), operational and tactical mission planning, intelligence, surveillance, and reconnaissance (ISR) support, engineer planning, Aerial Port of Debarkation (APOD), Seaport of Debarkation (SPOD), Large Scale Combat Operations (LSCO), Counter Insurgency (COIN), Humanitarian and Disaster Relief (HADR) and many other uses. The Warfighter Support Directorate (WSD), 3DH2-M Program is a part of the US Army Corps of Engineers (USACE) at the US Army Geospatial Center (AGC). The 3DH2-M Program focuses on providing high fidelity geospatial foundational data/terrain mapping, and provides support to all authorized Army, DoD, and other government organizations. The purpose is to collect, process, disseminate, apply, and maintain HR3D geospatial data by conducting flight and collection operations and by processing and producing the required 3DH2-M data products (comprised of but not limited to terrestrial and bathymetric LiDAR, EO, Synthetic Aperture Radar (SAR), Hyperspectral Imaging (HSI), Full Motion Video (FMV), Special Intelligence (SI), and unclassified commercial satellite imagery data). In addition, the Department of Defense (DoD) is pursuing advancements in terrestrial and bathymetric LiDAR, SAR, HSI, and FMV sensor technology. This is a result of the operational requirement to provide high fidelity terrain mapping from a higher altitude, higher velocity aircraft platform (to reduce risk from adversary fire). DoD requires advancement in supporting terrestrial and bathymetric LiDAR, SAR, HSI, and FMV data processing, storage, and dissemination technology. Current terrestrial and bathymetric LiDAR collection systems are rapidly improving/increasing area collection rates as well as increasing the geospatial fidelity of the data. In order to keep pace with the improving collection systems, improved, more rapid data processing needs to be integrated into the 3DH2-M program. The 3DH2-M program is also looking for emerging technology integration for LiDAR (terrestrial and bathymetric), Electro Optical (EO), SAR, HSI, FMV, SI, and Measurement and Signals Intelligence (MASINT) sensors. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform the 3DH2-M support task except for those items specified as government-furnished property, services, and information. This acquisition is a non-personal service and is not for performance of Inherently Government Functions. Feedback addressing the clarity, feasibility, scope, and potential alternative means of meeting the Government's requirement is sought. The Government anticipates five (5) task orders against the Single Award ID/IQ. The Government anticipates one (1) of the following NAICS codes. NAICS: 541990 - All Other Professional, Scientific, and Technical Services NAICS: 541370 - Surveying and Mapping (except Geophysical) Services The Government anticipates a single award ID/IQ Period of Performance (PoP) of one (1) 12-month base period and four (4) 12-month option periods. The anticipated PoP start date is 12 August 2027. The Government anticipates a Sample Task Order PoP of one (1) 12-month base and one (1) 12-month option period. The anticipated PoP start date is 12 August 2027. Services are currently under the HR3DGI O&TI III OASIS+ Task Order (Contract No. 47QRCA 25DU210 / Task Order No. W5J9CQ25F0017) Purpose: The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of firms capable of performing the functional requirements contracts of this magnitude, and to address any questions, recommendations or concerns from Industry. The Government must ensure there is adequate competition among potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this Sources Sought Notice announcement. This Sources Sought Notice is not intended to be a Request for Proposal nor Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach. It is to request statements regarding the company's ability to demonstrate existing-or-developed expertise and experience in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may also be submitted with the Capabilities Statement. Submission of Capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Corps of Engineers in tailoring requirements to be consistent with industry capabilities. This synopsis is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Security Requirements: The contractor will be required to have access to data and systems that are for Unclassified, Controlled Unclassified Information (CUI), Secret, Top Secret (TS), Sensitive Compartmented Information (SCI), Special Access Program (SAP) and/or Alternative Compensatory Control Measures (ACCM) during performance of the task order(s). All personnel, assigned to future task orders, accessing government facilities and/or systems shall possess at least a SECRET clearance. Key personnel, assigned to future task orders, shall possess a TOP SECRET clearance and be eligible for SCI adjudication on the start date of a task order period of performance, per the needs of each task order. Please see the attached DRAFT Performance Work Statements for further security requirements information. CMMC Requirements: The scope included in this upcoming requirement requires the contractor and/or subcontractor(s) information system to process, store, or transmit Federal Contract Information (FCI) or Controlled Unclassified Information (CUI), and requires the contractor and/or subcontractor(s) to comply with CMMC requirements. The Government anticipates that the Contractor shall have and maintain for the duration of this contract, order, or agreement a current CMMC status at the following CMMC level, or higher: CMMC Level 2 (Self) minimum and/or CMMC Level 2 (C3PAO) preferred for all information systems used in performance of the contract, task order, or delivery order that process, store, or transmit FCI or CUI. See DFARS 252.204-7021 Contractor Compliance With the Cybersecurity Maturity Model Certification Level Requirements, for the definitions, requirements, reporting, and subcontract information for this contract/order/agreement. Requested Information: You must submit a completed Sources Sought Questionnaire and Capability Statement in accordance with (IAW) the below information. Do not send your organization’s standard Capabilities Statement or Brochure. The Government is requesting specific information in order to determine Other Than Small Business and Small Business capabilities. The Government may use information received under this notice to determine if a small business reserve or set-aside is appropriate. This Sources Sought Notice does not restrict the Government to the ultimate acquisition approach. Sources Sought Questionnaire: You must complete and submit the attached Sources Sought Questionnaire. Your responses will be the primary tool used for our market research. Please be as detailed and accurate as possible. Capability Statement: Request companies submit a Capability Statement that presents your technical capability for providing the support services as it relates to the subject requirements. The Capability Statement shall at the minimum address the specific areas as identified below. Please provide the following: 1) A brief Statement of Capability (maximum 15 pages) size 12 Arial/Times New Roman Font; which demonstrates the company’s ability to meet what is listed in the DRAFT Single Award ID/IQ PWS and DRAFT Sample Task Order PWS. The Government is seeking those that possess and demonstrate an in-depth understanding of all the requirements. Mark any proprietary information accordingly. 2) Provide maximum of three (3) Relevant Past Performance information on PRIME Government contracts of similar size and scope within the past three (3) years. Also, if you can provide the specific contract number to allow for review. Relevant Past Performance information will be limited to maximum of three (3) per each occurrence. 3) Capability of providing technical competency and experience in the listed set of requirements, as a Prime contractor or using subcontractors and/or partners Subject of email for Capability Statement shall be as follows: Three-Dimensional High Speed - High Altitude Mapping (3DH2-M) for USACE Army Geospatial Center – Capability Statement – Vendor Name Questions regarding the Requirements shall be submitted using the following format: Question #1: Requirements #: Or Question #1: General Direct all Capability Statement Responses, Sources Sought Questionnaire Responses, and Questions to Contract Specialist, Courtney Freeman, Courtney.D.Freeman@usace.army.mil and Contracting Officer, Angela Lape, Angela.S.Lape@usace.army.mil for planning purposes. Please see the attached 3DH2-M O&TI Sources Sought Questionnaire, DRAFT Single Award ID/IQ Performance Work Statement (PWS), and DRAFT Sample Task Order PWS. | 48% | Market Research | 02/19/2026 |
The Joint Program Executive Office for Chemical, Biological, Radiological and Nuclear Defense (JPEO-CBRND) is organized into five Joint Project Management Offices (JPMO), each responsible for specific commodity areas. Mission areas and technical points of contact for the product management offices are shown in Section VII of this BAA. As the purpose of this BAA is to identify the best available science in the identified areas of research interest, proposals are sought from all eligible sources as specified herein, including educational institutions, nonprofit organizations, and private industry. This Broad Agency Announcement (BAA) provides general information, proposal preparation instructions, evaluation and selection criteria, and award administration. Offerors may submit unsolicited proposals (preproposals) for consideration under the general requirements of this BAA at any time, as long as the announcement is active, in support of research and development within the mission areas identified in Section VII of this announcement. Studies related to novel solutions and improved methods to develop medical countermeasures more rapidly and with increased efficiency through enabling technologies, life cycle bioinformatics, and improved logistics tracking are of specific interest to the Government. This announcement will also be available on the Grants.gov web portal (http://www.grants.gov/), the Contract Opportunities section of SAM.gov website (https://sam.gov) and the JPEO-CBD website (http://www.jpeocbd.osd.mil/). From time to time, special announcements or calls for proposals referencing this BAA may be issued for specific requirements in addition to any requirements announced in Sections VII and VIII. Additionally, the application process may be amended as other electronic application processes are implemented. All amendments to this BAA will be announced respectively. To facilitate communication on both scientific and administrative matters relating to this BAA, a single email address may be used for all communication with the Government. Please send all technical and administrative questions and inquiries to usarmy.detrick.dod-jpeo-cbrnd.mbx.baa@army.mil. Potential Offerors are encouraged to discuss their proposal ideas with the JPMO technical contacts listed in Section VII (B). Administrative questions concerning the preparation of preproposals or proposals should be addressed to U.S. Army Contracting Command Edgewood Contracting Division/ Grants Officer. They should be emailed to usarmy.detrick.dod-jpeo-cbrnd.mbx.baa@army.mil, ATTN: CBRND BAA 22-01. | 47% | Solicitation | 01/01/2031 |
*** 11/03/2026: AMENDMENT 06 ISSUED - SEE SUMMARY OF AMENDMENT AT BOTTOM OF POSTING*** ***SUMMARY ONLY - SEE ATTACHED COMBINED SYNOPSIS/SOLICITATION DOCUMENT FOR FULL DETAIL*** APS _ Combined Synopsis/Solicitation Brief: Combined Synopsis/Solicitation for Commercial Items Agile Professional Services ("APS”) Department of the Army Project Name: Agile Professional Services ("APS") Solicitation Number: W900KK-26-R-A023 NAICS Code: 541990 (All Other Professional, Scientific, and Technical Services) Set-Aside: Total Small Business Set-Aside Contract Type: Labor Hours/T&M 1. General Information This combined synopsis/solicitation is issued by Army Contracting Command - APG - Orlando Division to procure Agile Professional Services ("APS"). The acquisition is structured to support critical technical and professional operations under a flexible framework, to be proposed and developed by the successful offeror. Key acquisition parameters include: • Set-Aside Status: 100% Total Small Business Set-Aside. • Small Business Size Standard: $19.5M, or as defined by SBA regulations. • Primary NAICS Classification: 541990 — All Other Professional, Scientific, and Technical Services. • Contract Vehicle Type: Labor Hours/T&M 2. Solicitation Details This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This combined synopsis/solicitation is prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2025-06, effective August 27, 2025.and DFARS Publication Notice (DPN) July 2, 2026. As described in the attached FAR 52.212-2, The Army will adopt aspects of FAR Part 15 evaluation procedures. Considering the novel, and commercial, nature of these services this is deemed necessary to balance fairness, transparency, and competition with the interests of expediency and flexibility 3. Description of Requirement CPE ST3 has a need for Agile Professional Services (APS) support services to provide the organization with the ability to augment its Military and Government Civilian workforce in order to execute its mission. The services will be limited to providing professional support services, under a Performance Based Services model, to CPE ST3 and CPE ST3 customers for limited requirements which are related to CPE ST3’s mission. Since its inception, CPE ST3 has relied on contractor support to conduct its mission in all phases of life cycle management due to insufficient personnel within the organization to successfully perform the required services. This model of a Government footprint with a scalable contractor workforce has enabled CPE ST3 to be very flexible and agile in its mission to support the changing needs of the Army. The services to be performed will include related activities in support of all aspects of providing responsive integrated and interoperable infrastructure for simulation, training, testing, and threat solutions. APS support services are required for effective, efficient, and responsive full lifecycle management of efforts to include, but not limited to: vision statements and doctrine, development of architectures, program support (e.g., acquisition and budget planning, business and financial programming and execution, modeling, simulation, simulator, training device, and instrumentation development, documentation, fielding and execution, system analysis and integration, integrated logistics support, strategic planning, contingency and mission support, security cooperation/international relations, program oversight, independent verification validation and test evaluation, prototype development, sustainment and operations, and analysis of emerging technologies support), and subject matter experts on military tactics, techniques, and procedures. Potential areas of growth are envisioned but not limited to be in the areas of Cyber and Information Warfare, Robotics, Unmanned Vehicles, Home Station Training, Multi-Sensory Simulation, Artificial Intelligence, Hypersonics, Directed Energy, Electronic Warfare, Autonomous Systems, Multi-Domain Integration, Target and Threat Systems, Environment Modeling, Human Performance Training, Security Cooperation, Nuclear Engineering, and Medical Training. The critical performance requirement is the successful development and transition of CPE ST3 from a traditional, staffing-based support model to a task-based, outcome-driven Agile delivery framework that is to be developed by the Performer. Success will be measured by the contractor's ability to develop and iterate, through performance under the resultant contract, a framework that both provides the following, and is able to be replicated across future requirements. 4. Period of Performance / Performance Locations: Total Performance Period shall not exceed 66-months: Base Period – (15-Mar-27 to 14-Sep-27) Agile Development and Transition In Option Period 1 – (15-Sep-27 to 14-Sep-28) – Enterprise Performance Option Period 2 – (15-Sep-28 to 14-Sep-29) – Enterprise Performance Option Period 3 – (15-Sep-29 to 14-Sep-30) – Enterprise Performance Option Period 4 – (15-Sep-30 to 14-Sep-31) – Enterprise Performance Option Period 5 – (15-Sep-31 to 14-Mar-32) – Enterprise Performance and Transition Out Option Period 6 – (15-Mar-32 to 14-Sep-32) – Option to Extend the Term of Service under FAR 52.217-8 * Work will be performed at Government facilities, Contractor facilities, and Remote locations. Primary Government sites include Orlando, FL, and Redstone Arsenal, AL (including 24/7 operations). Additional Government sites include: Fort Campbell, KY; Fort Hood, TX; Fort Drum, NY; Fort Irwin, CA; Fort Polk, LA; Fort Rucker, AL; Fort Bragg, NC; Hohenfels, Germany; and Camp Humphreys, South Korea. 5. Applicable FAR Provisions/Provisions: See Attachment 7. The provisions and clauses apply to this acquisition and are incorporated by reference or full text as applicable. The full text of the FAR and DFARS clauses may be accessed electronically at https://www.acquisition.gov/. 6. Proposal Submission Instructions Phase I responses to this solicitation are due by 28 October 2026 / 10:00am (Eastern). Submission due dates for all subsequent Phases will be issued via Advisory Notifications / Invitations. a. Electronic Submission Requirement All proposals must be submitted electronically via the Department of Defense Secure Access File Exchange (DoD SAFE) application at https://safe.apps.mil . Hardcopy submissions or proposals sent directly via standard email will not be accepted. b. Requesting a DoD SAFE "Drop-off Request" Link Because guest (non-government/commercial) users cannot initiate file uploads on DoD SAFE without a government-issued invitation, all offerors must request a "Drop-off Request" link . The Request Process: To receive an upload link, the offeror must send an email to ST3ProfessionalServices@army.mil. The Cut-off Deadline: Requests for a DoD SAFE drop-off link must be received no later 10:00am Eastern on 27 October, 2026. Link Validity: Once the Government processes your request, you will receive an automated email from DoD SAFE containing a unique link and instructions. This link is valid for exactly 14 days from the date of receipt. WARNING: The Government will not be held responsible for late proposals resulting from an offeror's failure to request a drop-off link by the established deadline. c. Submission Protocol Upon receipt of the automated DoD SAFE email link: Click the link inside the automated email to access the secure upload portal. Upload all required solicitation attachments, ensuring they are named clearly. Click "Submit" or "Drop-off" to complete the upload process. d. Timeliness of Submissions The Submission Timeframe: For a submission to be considered timely, the completed DoD SAFE upload must be finalized, and the automated system notification must arrive in the Government recipients' inboxes on or before the official Proposal Due Date and Time. Upload Buffer: Depending on your network speed and the size of your proposal volumes, uploads can take time. Offerors are highly encouraged to start their upload several hours before the deadline. Technical difficulties, network latency, or Offeror delays in upload initiation will not be used as a justification to accept late submissions. * Late Submissions: Late submissions will be handled in accordance with FAR 52.212-1(f). See FAR 52.212-1, Instructions to Offerors — Commercial Items; for proposal submission instructions. 7. Additional Information i. Questions: The deadline to submit questions for this RFP has passed. ii. Security Clearance Requirements: See DD254 for specifics. a. Probable Facility Clearance without Storage b. Probable Secret, Top-Secret, and TS/SCI requirements for certain employees. 8. Attachments: i. Statement of Objectives (SOO), dated 8 September 2026 ii. FAR 52.212-1 – Instructions to Offerors - Proposal Submission instructions iii. FAR 52.212-2 – Evaluation Criteria – Evaluation Plan iv. Wage Determinations a. WD 2015-4377 REV 33 20260820 NC b. WD 2015-4553 REV 31 20260730 FL c. WD 2015-4603 REV 34 20260820 AL d. WD 2015-4631 REV 34 20260812 AL e. WD 2015-4719 REV 34 20260812 KY f. WD 2015-5197 REV 33 20260812 LA g. WD 2015-5237 REV 32 20260812 TX h. WD 2015-5629 REV 29 20260513 CA i. WD 2015-5775 REV 32 20260812 NY v. PWS Template vi. QASP Template vii. Provisions and Clauses viii. CDRLs a. A001 – Contractor’s Progress and Status Report b. A002 – Phase-Out Transition Plan c. A003 – Agile Dashboard d. A004 – Agile Management Plan ix. DD 254 a. SAP Addendum (incorporated into Attachment 9 (“ix.”)) b. SCI Addendum (incorporated into Attachment 9 (“ix.”)) x. APS Pricing Workbook xi. Army DSO JIRA Settings (TO BE PROVIDED PRIOR TO PHASE II PROPOSAL SUBMISSIONS) xii. Compliance Matrix (Government Format) Acknowledgement of Amendments: 1. Amendment 01: The purpose of this amendment was to provide Attachment-6_Quality_Assurance_Surveillance_Plan_(QASP)_Proposal_Template_-_APS_20260903 2. Amendment 02: The purpose of this amendment was to do provide responses to Industry questions, to revise the Combined Synopsis/Solicitation, to provide for revised submission dates, and to provide updated Attachments 1, 2, 3, 4.e, 5, and 10. 3. Amendment 03: The purpose of this Amendment was to update the proposal submission instructions incorporating submission requirements and instructions for the use of DOD SAFE as the sole method of submission. 4. Amendment 04: The purpose of this amendment was to update the Combined Synopsis Solicitation, Proposal Submission Instructions -1, Evaluation -2, and the Pricing Workbook for clarity and changes to Phase II information. This amendment does NOT impact the Phase I Proposal Submission Requirements / Deadline. 5. Amendment 05: The purpose of this Amendment was to update the following: 1) Revise Section 7 (Proposal Submission Instructions) of the Combined Synopsis/Solicitation Attachment, updating the DoDSAFE "drop request" date, updating the submission due date; and 2) Revise Section 6 of the SAM.Gov posting to reflect the above. 6. Amendment 06: The purpose of this Amendment was to update the following: a) Revise Attachment 10 – APS Pricing Workbook with revised Periods of Performance, b) Revise and incorporate the Government’s required template for Attachment 12 – Compliance Matrix, c) Revise Attachment 02 - FAR 52.212-1 – Instructions to Offerors - Proposal Submission instructions with the Government’s required template usage for Attachment 12 – Compliance Matrix, d) Revise Attachment 03 - FAR 52.212-2 – Evaluation Criteria – Evaluation Plan with the Government’s required template usage for Attachment 12 – Compliance Matrix, and e) Revise Section 5 of the SAM.Gov posting for the Period of Performances and Government’s Tentative Milestone Schedule. **SUMMARY ONLY - SEE ATTACHED COMBINED SYNOPSIS/SOLICITATION DOCUMENT FOR FULL DETAIL*** | 46% | Combined Synopsis | 10/28/2026 |
Additional Details
Solicitation Number
W911QX24R0035
Archive Date
Aug 23, 2024
Office Address
ADELPHI, MD, 20783-1197