GovChime
Notice ID: e4e6383db1634d8b93d8e317fa3a45d7Combined Synopsis/Solicitation

W911QX25Q0010-Qty one (1) 8-tile High Resolutions Strideway System

Archived on November 29, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−05:00
Posted
November 6, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
334519: Other Measuring and Controlling Device Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-APG ADELPHI
Place of performance
Aberdeen Proving Ground, MD, 21005
Last updated
Dec 4, 2025

Identifiers

Solicitation number
W911QX25Q0010
Notice ID
e4e6383db1634d8b93d8e317fa3a45d7

Description

The Government requires quantity Qty one (1) Past number HRSW8: 8-tile High Resolutions Strideway System and including shipping, Each

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W911QX25Q0010
  1. Combined Synopsis
  1. Combined SynopsisCurrentNov 6, 2024

    W911QX25Q0010-Qty one (1) 8-tile High Resolutions Strideway System

    Notice e4e6383db1634d8b93d8e317fa3a45d7 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Request for Preproposals for Vehicle Integrated Platform Enhanced RADIAC (VIPER): Non-GM Alternative Sensor Prototype for Tracked Tactical Ground Vehicles This requirement will be handled through the procedures established in the Broad Other Transaction Authority Announcement (BOTAA) Supporting Other Transaction Authority Agreements for Prototype Development Efforts for the JPEO CBRND – Combating Weapons of Mass Destruction (“JPEO-CBRND CWMD BOTAA-24-01”). Please review the BOTAA announcement and submission requirements in full prior to submitting a Pre-Proposal. Ensure that your submission references “CWMD BOTAA-24-01 VIPER_27-TRACK." Link to BOTAA: https://sam.gov/workspace/contract/opp/2d04622b25364669857a6a61c576ade9/view Pre-proposals are due no later than 12:00 PM EST on December 10, 2026. The full request for pre-proposals is attached to this posting.
-Pre-Solicitation12/10/2026
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price contract on a noncompetitive basis to Peak Scientific, Inc. - 210 Littleton RD STE 110- Westford, Massachusetts 01886-3580 to provide the following service: Genius XE 35 laboratory nitrogen generator QTY 2 Peak Scientific Instruments Ltd BOTTLE-DRAIN QTY 2 This action is be undertaken in accordance with FAR 12.102 (a) Soliciting from a single source, on the basis that the vendor is the only known source capable of meeting the government’s requirements The North American Industry Classification System (NAICS) for this requirement is 334519. The FSC code is 6640. The resulting contract will be a firm fixed price contract. Negotiation being conducted using other than full and open competition procedures pursuant to authority of 41 U.S.C 1901. This Notice of Intent is not a request for quotes. Interested parties may identify their interests and capability to respond to this requirement by September 29, 2026, at 10AM (EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. The determination not to compete this proposed contract action is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice. Responses to this electronic notice must be made by 10:00 a.m. EST on September 29, 2026. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gove/portal/public/SAM. Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements, quotes, and capabilities to Shannon Wooten, via email: Shannon.cloud-wooten@navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability.
-Special Notice09/29/2027
12 NOV 2026 - The purpose of this revision is to incorporate the additional questions from industry after the posting of Revision 1 of the RPP. The additional questions and answers are titled W91CRB-RPP-USHC_QAs_Rev1 12 NOV 2026. ***************************************************************************************************************************************************** 4 NOV 2026 - The purpose of this revision is to incorporate Revision 1 of the RPP, upload the Questions and Answers and to extend the offeror due date to 1600 EST, 20 November 2026. With the incorporation of this revision, final questions are due NLT 1600 EST, 9 November 2026. A follow on Questions and Answers for this period will be uploaded shortly after 9 November 2026. Three attachments will be uploaded in this RPP revision: 1) W91CRB-RPP-USHC_Rev 1 - changes are highlighted in red font to the following sections of the RPP: Sections 2.4, 5.1 & 5.2 2) W91CRB-RPP-USHC_QAs - .pdf containing 10 questions and answers 3) W91CRB-RPP-USHC_QAs_Cont. - Excel spreadsheet containing remaining questions ****************************************************************************************************************************************************** The Portfolio Acquisition Executive (PAE) Maneuver Ground Project Manager (PM) Maneuver Medical Devices (M2S) is issuing this Request for Prototype Proposals (RPP) to solicit solutions for an Ultrasound Diagnostic System, Hand Carried (USHC). The U.S. Army requires a Commercial-Off-The-Shelf (COTS) or Non-Developmental Item (NDI) hand-carried ultrasound device capable of supporting medical operations in austere Role of Care (ROC) 3 environments with little to no modification. The selected vendor(s) will deliver two (2) prototype units for operational and environmental testing (MIL-STD-810H). The solution must be FDA cleared for human use, Trade Agreements Act (TAA) compliant, and operate on standard CONUS/OCONUS power infrastructures. In accordance with 10 U.S.C. § 4022(f), the Government advises all offerors that a noncompetitive follow-on production contract or transaction may be awarded to the participant(s) of this Prototype Other Transaction Agreement (OTA) without the use of competitive procedures Submission Instructions: Proposals must be submitted via DoD SAFE file transfer or secure email. Submit to: Timothy Compton, Agreements Officer (timothy.j.compton7.civ@army.mil) Copy to: Roxanne A. Dalrymple, Agreements Specialist (roxanne.a.dalrymple.civ@army.mil) Please see attached.
-Solicitation11/20/2026
The primary purpose of this requirement is to provide support for the quantitative and technical analysis of the chemical constituents of fruit fly lures and attractants. The objectives are as follows: Provide chemical data, analysis and recommendations to assure trap and lure contract performance and quality assurance. Provide chemical data for the development of new fruit fly detection tools and strategies for continued program improvement. Participate in contract Statement of Work criteria development for new contracts awarded to lure manufacturers.
-Pre-Solicitation11/25/2026
The Defense Logistics Agency-Aberdeen, on behalf of the Army Integrated Logistics Supply Center (ILSC) – Supply Chain Management Directorate (SCMD) – Strategic Sourcing Directorate (SSD), intends to acquire Parts for Doppler GPS Navigation System. Requirements Description: The United States Army is looking for sources with the ability to provide parts for the Doppler GPS Navigation System. The items to be procured for the Doppler GPS Navigation System . The Government does not possess specifications or detailed drawings for the referenced system. The Government does not possess the technical data package (TDP) for the parts. Background Information: Previous Contract/Order No. W15P7T-13-D-E013 The following additional NAICS apply: 334220, 334413, 334416, 334418, 334419, 336413, 336319 Items and/or Services to Be Procured under a Single Award IDIQ: NSN: 5895-01-518-8783 NOMENCLATURE: CONVERTER SIGNAL DA PART NUMBER: P320A002-02 NSN: 5998-01-530-3442 NOMENCLATURE: CIRCUIT CARD ASSEMBLY PART NUMBER: H274A112-01 NSN: 5895-01-653-0833 NOMENCLATURE: CONVERTER SIGNAL DA PART NUMBER: P320A002-04 Requested Response Information: We request that sources who can manufacture the listed parts or services submit information to show their capability to manufacture the same part. At a minimum the support information you submit should include, but is not limited to, the following types of documentation: Questionnaire, drawings, test results, information on previous Government and commercial contracts, data rights, etc. In your response, please include your company name, CAGE code, and a technical point of contract with email address and telephone number. Notice, Response Due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse any costs associated with the preparation of responses to this SSA. This Sources sought announcement (SSA) is for planning and market research purposes only and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the DLA Aberdeen Small Business Office. Contractor Questionnaire Please complete the following questions. If a question does not apply, please enter N/A or non-applicable. 1. Provide a brief summary of your company and its core competencies. 2. Please provide the following Point of Contact information on all responses: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3. Describe your Company's past performance in the manufacturing and/or supplying of Power Supply and Circuit Card Assembly in the past. Provide Contract Number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort. 4. Describe the qualifications of your engineering staff who have experience in the design and production of supplies similar in complexity and technology to power supplies, circuit cards, data processors, and other electronic items. 5. Describe your company's experience in identifying the test equipment for components similar in complexity and technology to what is used in the listed items to include power supplies and a circuit card assembly. 6. Describe your company's experience and process for managing obsolescence issues. 7. Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). 8. Describe your company's experience in identifying alternatives for unavailable or obsolete materials or components to mitigate obsolescence issues. 9. Discuss your company's capability to meet US Government delivery requirements for this specific product. 10. The Government prefers Spot Buy. Can your company meet the Government preference. If not, please describe what you are willing to provide. 11. The Government prefers Fixed Quantity. Can your company meet the Government preference. If not, please describe what you are willing to provide or what you would prefer to provide. Please explain. 12. Do you have product(s) or keep products in stock? 13. Are there any vendors in your supply chain that you are concerned would prevent you from meeting the Government delivery schedule? – If so, please describe the company and what steps you are taking or have taken to mitigate. If it is a Government-directed source, please describe any other vendors that may have the capability to meet the delivery schedule.
-Market Research11/26/2026

Additional Details

Solicitation Number

W911QX25Q0010

Archive Date

Nov 29, 2024

Office Address

ADELPHI, MD, 20783-1197