GovChime
Notice ID: 0704d306f93542509565db65822efcdeCombined Synopsis/SolicitationArchived

Intent to Solicit one source for one (1) pair of press platens to be manufactured and installed to replace damaged platens on a Collin Lab and Pilor Solutions GmbH manufactured Press 500 S equipment.

Archived on September 20, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:59 AM EDT
Posted
August 28, 2025
Notice type
Combined Synopsis/Solicitation
NAICS
333248: All Other Industrial Machinery Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-APG ADELPHI
Place of performance
Aberdeen Proving Ground, 21005
Last updated
Nov 8, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911QX25Q0111
Notice ID
0704d306f93542509565db65822efcde

Description

DEVCOM ARL requires a pair of press platens to replace damaged platens on the Collin Press 500 S equipment owned by Sciences of Extreme Materials Division, Polymers Branch. The following are required: Shall have one (1) pair (one upper and one lower) of press platens The platens shall be compatible with existing Collin Press 500 S equipment and shall have the ability to be directly installed. The platens shall be compatible with the existing control system of the Collin Press 500 S, such that the onboard control system can control heating and cooling of the press platens. The platens shall be capable to withstand 2000N force on a 7 x 7 mold, while using a 1 thick steel caul plate measuring 18 x 18 without damage or permanent deformation The platens shall be capable to withstand the above pressure conditions through repeated press cycles from room temperature up to 450oCelsius. The upper and lower platens shall be capable of independent temperature control Shall include on-site installation, start up, and training after the parts have been installed.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (2)

  • COMBO SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS (25Q0111).pdf

    553 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • Adelphi Special Instructions and Information (25Q0111).pdf

    360 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    Intent to Solicit one source for one (1) pair of press platens to be manufactured and installed to replace damaged platens on a Collin Lab and Pilor Solutions GmbH manufactured Press 500 S equipment.

    Notice 0704d306f93542509565db65822efcde on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland, is interested in establishing Blanket Purchase Agreements (BPAs) with companies that provide standard commercial supplies and services at competitive prices in Classification: PSC/FSC Code 4310, NAICS 333248, COMPRESSORS AND VACUUM PUMPS (VACUUM PUMPS) PSC/FSC Code J036, NAICS 333248, MAINT/REPAIR/REBUILD OF EQUIPMENT – SPECIAL INDUSTRIAL MACHINERY (MIXER PARTS) PSC/FSC Code 3660, NAICS 333248, INDUSTRIAL SIZE REDUCTION MACHINERY (GRINDER PARTS) PSC/FSC Code 3695, NAICS 333248, MISCELLANEOUS SPECIAL INDUSTRIAL MACHINERY (MIXER & GRINDER PARTS) PSC/FSC Code 4330, NAICS 333248, CENTRIFUGALS, SEPARATORS, AND PRESSURE AND VACUUM FILTERS (VACUUM FILTER PARTS) PSC/FSC Code 3665, NAICS 333248, CHEMICAL AND PHARMACEUTICAL PRODUCTS MANUFACTURING MACHINERY (MIXER PARTS) BPA Calls will not exceed the Simplified Acquisition Threshold and Offerors will compete at the call level. Interested companies must (have/include): Cover sheet with the official company name, cage code, and point of contact including name, phone number, and email address. Documentation addressing the capabilities and expertise. Complete and return a price list, if applicable. BPA's will be awarded on the basis of positive Past Performance. Interested vendors should provide a minimum of three Past Performance References (attached). The Past Performance references shall include name of the business/organization, address, and contract /order number, and award amount, point of contact, telephone number and description of the item. The Past Performance will be evaluated based upon Customer Satisfaction, Timeliness, Technical Success, Program Management, and Quality. The government reserves the right to use additional references if available. An active account in the Procurement Integrated Enterprise Environment (PIEE formerly WAWF) at https://pieef.eb.mil to enter invoices and receiving reports, or credit card as a method of payment. An active account in System for Award Management (SAM https://www.sam.gov) Important Notes: *This is a small business set-aside. If you possess a GSA contract, please note your GSA contract number in your response. *Vendors who are found to have technical and past performance merit will be issued a Master BPA to be able to bid on future requirements. *Price lists and catalog prices can be provided as they may help with direct award under the $10k threshold.
67%
Combined Synopsis11/11/2028
Overhead reservoir Goo Grinder Specifications: Uses gear pumpsand chain drive to accurately meter two-part materials. Options include shot control,footswitch, static mixer manifolds, air drive, electric drive, and heaters. Output is up to 1.5quarts per minute, less with more viscous materials. Ratio range is 1:1 to 6:1. Fixed ratio iseasily adjusted by changing drive sprockets. Two five-gallon reservoirs along with drumfeed. For non-abrasive materials with viscosities from 300 to 50,000 cps or more withoptional heater. Air Drive Variable speed Easily adjusted Compatible shot-size controlRuns on standard shop Air Pneumatic Hand- or foot- toggled control Electric Drive AC DC110V 110V Fixed speed Variable speed Footswitch, toggle, or thumb-button Footswitch,toggle, or thumb-button Compatible with shot-size control Compatible with shot-sizecontrol Part numbers GG-OH OVERHEAD RESIVOR GOO GRINDER GGOPT AIRDR AIR DRIVE OPTION FOR GOO GRINDER GGOPT-OH5GAL W/PLATE 5GAL RESERVOIR OPTION FOR OVERHEAD GOO GRINDER WITH LARGE TOP PLATE AND TWO 5 GAL RESERVOIRGGOPT-PNFTSW PNEUMATIC FOOTSWITCH OPTION FOR GOO GRINDER GGOPT-MXROH- MIXER OPTION FOR OVERHEAD GRINDER
52%
Combined Synopsis10/30/2026
The purpose of this amendment is to extend RFQ due date to 11/13/2026, change delivery dates and correct the size of the couplers. The Plant Section located at Ensley Engineer Yard is purchasing two (2) Diesel-powered trash pumps and accessories.
43%
Solicitation11/13/2026
THE PURPOSE OF THIS CONTRACT IS TO AWARD A FIVE YEAR-YEAR FIRMED FIXED PRICE, INDEFINITE DELIVERY INDEFINITE QUANTITY TYPE CONTRACT FOR THE FOLLOWING: NOUN: COMPRESSOR UNIT NSN: 4310-01-508-5885 PART NUMBER: 11474218-2 QUANTITY: MINIMUM 200 EACH/ MAXIMUM 350 EACH THIS SOLICITATION IS RESTRICTED TO TRANSDIGM INC. (81833). For complete details, please see the attached Solicitation Document (W31P4Q-27-R-A010).
43%
Solicitation11/26/2026
**AMENDED REMOVED CLN 3 AND 4**Compressors for Fort Bragg
43%
Combined Synopsis09/16/2026

Additional Details

Solicitation Number

W911QX25Q0111

Archive Date

Sep 20, 2025