Sustainment Aerial Delivery Equipment -Sling Load (SADE-SL) Low-Cost Cargo Net
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- March 12, 2026
- Notice type
- Presolicitation
- Set-aside
- No Set aside used
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG NATICK
- Place of performance
- Natick, Massachusetts, 01760
- Last updated
- Nov 2, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911QY-26-9-SADE
- Notice ID
- c3a869faff45479e875d4f06bf821f76
Description
Agency: Department of the Army
Office: Army Contracting Command, Aberdeen Proving Ground Natick Division
Location: Natick, MA
Program Office: Product Manager Force Sustainment Systems (PdM-FSS)
RPP Number: W911QY-26-R-SADESL
Date Issued: 12 March 2026
Proposals Due: 24 March 2026 NLT 1400 EDT
Objective
This competitive Request for Project Proposal (RPP) is issued to request formal competitive pre-proposals in the form of white papers in accordance with Section III, B, 1 of the U.S. Army Combat Capabilities Development Command Soldier Center (DEVCOM SC) Broad Other Transaction Authority Announcement (BOTAA) 22-01 competitive announcement and is being issued for planning purposes to execute a formal agreement under 10 USC 4022(b), Other Transaction Authority (OTA) for the prototype project described below.. It is not to be construed as a commitment by the Government to award an agreement, nor will the Government pay for the information solicited. Product Manager Force Sustainment Systems (PdM FSS) is seeking information on the capabilities and willingness of private entities to develop a design for Low-Cost 5000-pound and 10,000-pound Helicopter Cargo Nets that will support a prototype project, as defined on page 5 of the BOTAA.
Background
The Government is looking for a low-cost replacement of the current 5000-pound and 10,000-pound Cargo Nets or components of the Cargo Net system. The DoD uses Cargo Nets as a means of transporting equipment around the battlefield faster than traditional ground transport and without the need for large fixed-wing transport aircraft.
Requirements
The purpose of this RPP is to request pre-proposals to conduct preliminary design for a Low-cost Cargo Net capability. The preliminary design may be based on reusing, modifying, or enhancing existing designs.
The pre-proposals shall address the full requirements of this RPP:
Develop a Low-Cost Cargo Net Prototype
- Must be able to support the suspended weight capability in the standard system categories of 5,000 and 10,000 pound capacity at a 35% (T) and 75% or more (O) reduction of individual item cost compared to the current nylon cargo nets (T= threshold/ minimum a requirement needs to meet to be acceptable. O=This refers to an objective or best-case value for a requirement)
- The SADE‑SL shall not increase current sling‑load rigging time by more than 25% (T) and should ideally reduce rigging time by 25% or more (O).
- SADE-SL shall allow for ease of rigging for future variants of payloads with minimal redesign, test and certification, as well as reduce impacts on the environment. The payload compartment must provide quick release latching mechanisms for efficient unloading
- SADE-SL shall be compatible with current Army rotary wing aircraft that include the UH-60 and CH-47 (T) and compatible with other military and civilian rotary wing aircraft to include the CH-46, CH-53 and CV-22, Future Vertical Lift (FVL) medium and heavy lift aircraft
- SADE-SL shall be compatible to standard or recently developed sling load and airdrop components to the maximum extent possible
- The SADE-SL components shall be capable of operation and storage in all of the following climatic categories; Basic, Hot and Cold as current sling load and aerial delivery equipment/systems (T=O). Function in Basic, Hot and Cold conditions in accordance with MIL-STD-810G. These variables will be hot, basic, cold, ranges as low as -60o F (objective) to +145o F and high-altitude pressure standards characteristic of worldwide operations, as described in AR 70-38, dated 15 Sep 1979.
- It will operate within all terrain types (desert, mountain, jungle, and water/maritime), and during inclement weather, to include precipitation, air carrier Instrument Meteorological (IMC) conditions and maritime/salt fog conditions.
- As required by the Government, compliance may be verified at a Government approved facility in accordance with MIL-STD-810G, Method 500.4 (Low Pressure/High Altitude, and Rapid Decompression), Method 501.4 (High Temperature), Method 502.4 (Low Temperature), Method 505.5 (Solar Radiation – Sunshine Procedures 1,2), Method 506.4 (Rain Drip), Method 507.4 (Humidity), Method 508.4 (Fungus), Method 509.4 (Salt Fog), Method 510.4 (Blowing Dust), Method 510.4 (Blowing Sand), Method 511.4 (Explosive Atmosphere), Method 514.5 (UH-60, CH-47, C-130, C-17 and Loose Cargo Vibration).
- Capable of adaptation to other US forces for strategic, operational, and tactical military operations. Shall be designed to promote ease of operation and maintenance by the 5th percentile female through the 95th percentile male Soldier/Marine/Airman as described in MIL-STD-1472G while wearing the field duty uniform, cold weather uniform, and chemical protective uniform.
- Must demonstrate suitability in conditions where the user wears cold weather gloves. The system shall be capable of being transported by highway, rail, marine, and air modes, world-wide. The applicable transportability criteria are set forth in MIL-STD-1366E.
Full specifications and requirements are established in the attached Statement of Work (SOW).
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (4)
- Download
Request for Project Proposal SADE.pdf
114 KBAdded in Presolicitation version 3Posted - Download
SADE-SL SOW_Section C.pdf
220 KBAdded in Presolicitation version 3Posted - Download
Contract Data Requirements List.pdf
20 KBAdded in Presolicitation version 3Posted - Download
RPP Attachment NTDC Certification.docx
41 KBAdded in Presolicitation version 3Posted
Lifecycle
- 3Version 3PresolicitationArchivedCurrent
Sustainment Aerial Delivery Equipment -Sling Load (SADE-SL) Low-Cost Cargo Net
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
4x external load training (2x 15k, 1x 12k, and 1x 6k) blocks IOT replace the current deteriorating training blocks, enhance ability to train aircrews on external load procedures associated with L2A2 operations, and prepare for ARSTRUC lift asset increase. Blocks will meet criteria outlined in Natick Center Technical Data Package (TDP) 11-1-7752, addendum 01, which is the most current.2 X 15K Sing Block(s)- Construction: Concrete and rebar constructed training block allowing aircrews to train effectively while minimizing potential damage to Army equipment. Construction of the 15K block will follow the 18K technical data outline in 11-1-7752. This requires the vendor to proportionally scale down the volume, only reducing the length of the block, while maintaining the lifting provision dimension locations per the Technical Data Package. - Color -Coded: Training blocks adequately simulate common externally loaded cargo essential to the mission of the 101st Division (AASLT) (e.g., M1167, M1152A1 with Mobility Trailer). This weight also provides adequate training to prepare aircrews to transport dual ISVs rigged in the shotgun configuration ? vital to successful L2A2 Operations. 1 X 12K Sling Block- Construction: Concrete and rebar constructed training block allowing aircrews to train effectively while minimizing potential damage to Army equipment. Construction will be IAW with technical data in the attachments. - Color -Coded: Each Block shall be color-coded IAW the table below, integral ready-mic concrete dyes, such as those available from Solomon Colors, QC Construction Products or Davis Colors: - Block adequately simulates M777A1, M1097 w/ High Mobility Trailer, etc. 1 X 6K Sling Block- Construction: Concrete and rebar constructed training block allowing aircrews to train effectively while minimizing potential damage to Army equipment. Construction will be IAW with the attachment below. - Color -Coded: Each Block shall be color-coded IAW the table below, integral ready-mic concrete dyes, such as those available from Solomon Colors, QC Construction Products or Davis Colors. - Block adequately simulates M119A3, Container Roll-In/Out Platform (CROP), etc. Manufacturer Data Plate (Per Block):- Provide nameplate with block weight, manufacturer, manufactured date, unique local serial number, and that the block was made in accordance with this drawing to each weight. Made of brass, 4? Wide X 8? Long X 1/16? This (minimum) anchored with 4, ? x 2 ? screws in expansion shields on block top surface as shown in the attachments. | 50% | Combined Synopsis | 12/24/2025 |
Protective Equipment | 43% | Combined Synopsis | 12/29/2025 |
Proposed procurement for NSN 4240011287995 SLING ASSEMBLY: Line 0001 Qty 2 UI EA Deliver To: NAEW & CF E-3A COMPONENT By: 0020 DAYS ADO Approved source is 70167 D29810-101. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | 40% | Combined Synopsis | 11/09/2026 |
UPDATE: AMENDMENT 0002 IS HEREBY POSTED, ANSWERING QUESTIONS FROM INDUSTRY. PLEASE SEE ATTACHED FOR MORE INFORMATION. UPDATE: AMENDMENT 0001 IS HEREBY POSTED, ANSWERING QUESTIONS FROM INDUSTRY, ADDITION OF CONTROLLED PICTURES, AND UPDATING POC INFORMATION. PLEASE SEE ATTACHED FOR MORE INFORMATION. Army Contracting Command - Rock Island issues Solictitation W519TC27RA006 for the purchase of Lifting Pull Strap, in accordance with Drawing 12577572, Rev. K. The solicitation is for a guaranteed minimum of 13,500 ea Lifting Pull Straps on a five (5) Year, Firm Fixed Price, Indefinite Delivery Indefinite Quantity (IDIQ). Solicitation is a Total Small Business Set Aside. Please see the Solicitation and Attachments for further information. | 40% | Solicitation | 11/23/2026 |
Amended to change PSC code. Heavy Duty Nets and Heavy Duty Ropes for the installation obstacle course. | 40% | Combined Synopsis | 04/28/2026 |
Additional Details
Solicitation Number
W911QY-26-9-SADE
Archive Date
Apr 8, 2026
Office Address
NATICK, MA, 01760-5011