GovChime
Notice ID: 7566d9e7b46b49c2378badf51fb5555dSolicitation

A--Update Natick Website. Revised Dates - Joint Biological Tactical Detection System (JBTDS)Presolicitation Notice

Archived on May 28, 2014. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC+02:00
Posted
April 25, 2014
Notice type
Solicitation
NAICS
541712: Classification Not Available
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-APG NATICK
Place of performance
ACC-APG - Natick (SPS) ATTN: AMSRD-ACC-N, Natick Contracting Division (R and BaseOPS), Building 1, Kansas Street Natick MA 01760-5011 US
PSC
A: RESEARCH AND DEVELOPMENT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
W911QY13R0036
Notice ID
7566d9e7b46b49c2378badf51fb5555d

Description

Joint Biological Tactical Detection System (JBTDS) W911QY-13-R-0036 Presolicitation Notice ***The Presolicitation Notice issued on 30 Oct 2013, is hereby revised as follows: Request for Proposal (RFP) is expected to be issued on or about 6 Feb 2014 All other information remains unchanged and is listed below: The U.S. Army Contracting Center, Natick Contracting Division, on behalf of the Joint Project Manager - Nuclear Biological Chemical Contamination Avoidance (JPM-NBCCA), intends to issue a full and open competition solicitation under FAR Part 15, for the Engineering & Manufacturing Development phase of the Joint Biological Tactical Detection System (JBTDS), to include options for Low Rate Initial Production and Full Rate Production. The JBTDS is envisioned to be a lightweight, low cost, man-portable and battery operable capability set to detect, collect and identify biological pathogens and toxins in a tactical environment. The primary system functions are to detect biological warfare agents (BWA), collect aerosol samples, identify the BWA in the sample, and alert personnel of the presence of a hazard. The JBTDS detector/collector sub-system will provide visual, audible and networked warnings of the presence of biological agents and trigger sample collection. The JBTDS identifier will identify the presence of biological agents and identify specific target species. This effort will require the manufacture of BWA detection, collection, and identification hardware and software, consisting of the aforementioned capabilities linked together through a base communication system to allow real time detection from an independent location. Capabilities include: detector/collector, collector, identifier, and base station communications, each designed to function independently or together as one system. Requirements include the development and delivery of capabilities, engineering data, logistics products, and support to Government testing, training, and fielding. Capabilities will be developed, tested, and purchased to support force protection needs, with the capability to adapt systems in multiple configurations/mission scenarios. The Government does not intend to use FAR Part 12 for this acquisition. It is anticipated a combination cost plus incentive fee, firm fixed price, and cost type contract(s) shall be awarded to a single or multiple contractor(s). In accordance with FAR 16.301-3, the contractor's accounting system must be adequate for determining costs applicable to the contract. The Request for Proposal (RFP) is expected to be issued on or about 6 Dec 2013. The North American Industry Classification System (NAICS) code for this procurement is 541712 with a size standard of 500 employees. In accordance with DFARS 252.204-7004, Alternate A, all interested offerors shall be registered in the System for Award Management (SAM) database. Responses to the JBTDS solicitation will be evaluated on a Best Value basis. Proposal costs shall not be reimbursed. When released, all interested parties will be able to view, download, and print a copy of the solicitation and any resulting amendments at: U.S. Army Contracting Center, Aberdeen Proving Ground, Natick Contracting Division website: http://www3.natick.army.mil/W911QY-13-R-0036.aspx. Joint Project Executive Office for Chemical Biological Defense (JPEO-CBD) website at: http://www.jpeocbd.osd.mil/. FedBizOpps.gov at: https://www.fbo.gov/ Reference W911QY-13-R-0036 No telephone calls will be accepted. No paper copies of the RFP will be provided and no mailing list will be maintained. Questions or correspondence should be directed to: E-mail: richard.w.totten2.civ@mail.mil All inquiries should reference in the Subject Line RFP number W911QY-13-R-0036.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Richard Totten, 301-619-2446 ACC-APG - Natick (SPS)

Documents

No documents available.

Lifecycle

Solicitation:W911QY13R0036
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 3×
    Special NoticeMay 20, 2013

    A--Draft Request For Proposal (DRFP), seeking commercial entities with the capability to develop and produce systems for the Joint Biological Tactical Detection System (JBTDS).

    Notice 8624aa60e7ee3b62f85e73af284cbf83 on SAM.gov

  2. 6×
    Pre-SolicitationOct 30, 2013

    A--Update Natick Website. Revised Dates - Joint Biological Tactical Detection System (JBTDS)Presolicitation Notice

    Notice e9ade66efeecfe79f09f3dc91f9b9f2d on SAM.gov

  3. SolicitationCurrentApr 25, 2014

    A--Update Natick Website. Revised Dates - Joint Biological Tactical Detection System (JBTDS)Presolicitation Notice

    Notice 7566d9e7b46b49c2378badf51fb5555d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SYNOPSIS: This Sources Sought Announcement is to assist the US Army Combat Capabilities Development Command - Soldier Center (DEVCOM-SC) to identify potential sources to provide innovative product development research and/or consumer research and/or demonstration food samples in the area of alternative proteins. Responses are limited to Massachusetts based offerors as determined by CAGE code. The Government requests responders submit a Broad Agency Announcement BAA preproposal as outlined in DEVCOM-SC BAA W911QY-25-R-0023 located at: https://sam.gov/opp/a5ec94e2baee40df9951f864a8665e71/view Please refer to Section VI - Scientific and Technical Areas of Interest, A. Combat Ration Research and Development. Submit the BAA preproposal to: michael.s.wiederoder.civ@army.mil, richard.j.green.civ@army.mil and jean.m.trumpis.civ@army.mil by 23 November 2026, 5:00 PM EST. OBJECTIVE: DEVCOM-SC seeks product development, consumer research, and food sample demonstrations of current and emerging novel alternative protein technologies that could be integrated into military rations. BACKGROUND: The U.S. Army Combat Capabilities Development Command Soldier Center (DEVCOM-SC), Combat Feeding Division (CFD), is seeking information from industry and academia on capabilities related to alternative proteins. The U.S. Army is exploring how the emerging alternative-protein sector can help meet several objectives, including enhancing food supply chain resilience, enabling biomanufacturing of foodstuffs in combat-forward environments, and providing tailored, high-quality nutrition to the Warfighter. DEVCOM-SC CFD has unique expertise in the development and assessment of shelf-stable ration components, as well as food safety and palatability for the Joint Warfighter. We are looking to partner with the commercial and academic sectors to advance technology development in this area. AREAS OF INTEREST: DEVCOM-SC is seeking information from offerors that can provide capabilities in one or more of the following areas. Work proposed should be to advance technology between TRL 4 and 6. Please note, for the purposes of this Sources Sought, we are specifically excluding solutions related to cell-cultured, lab-grown meat or insect protein. Innovative technologies for alternative protein development to reduce Soldier load: Seeking advanced technologies and processes involved in fermentation, precision fermentation, or other novel biomanufacturing methods, that enhance the production of alternative proteins where additional funding in specific components of the research would significantly accelerate advancements in technology between TRL 4 and 6, enabling faster transition to operational use. These technologies should focus on creating lightweight and nutrient-dense ration solutions to reduce logistical burdens and physical load on warfighters while maintaining or enhancing nutritional value and operational performance. Innovative Product Development: The development of innovative meat-alternative products specifically designed for inclusion in military rations, meeting stringent requirements for nutrition, shelf stability, and palatability. Consumer Research and Acceptability: The ability to conduct comprehensive consumer research (e.g., focus groups, sensory panels, field testing) to enhance the acceptability and consumption of alternative proteins within a military population. Food Sample Demonstration: An optional addition to the effort would be to provide 100 food samples of a potential product that has Generally Recognized as Safe (GRAS) status with an FDA no-questions letter to demonstrate the maturation of an alternative protein manufacturing technology. These samples would be provided to the Government for sensory acceptability and other performance characteristics and will be consumed by our test panel of experts. SUBMISSION REQUIREMENTS: Interested parties (companies or academic institutions) are requested to submit a proposal that details their capabilities in one or more of the areas listed in Section 3.0. Submissions should include: A detailed description of your technical approach. Relevant past performance or corporate experience. A rough order of magnitude (ROM) cost estimate for the proposed work or samples. This information will be used for market research and planning purposes. Responses to this Sources Sought are not binding proposals, but they will help shape future solicitation requirements. Offerors are welcome to send samples at their own cost for evaluation. DEVCOM SC will not return any items, nor is DEVCOM SC obligated to share any data from evaluation. Sending samples is not required for consideration for funding. Samples must be GRAS with an FDA no-questions letter. Please coordinate by e-mail (richard.j.green.civ@army.mil) before sending samples. Address information will be provided at that time. SOUGHT ANNOUNCEMENT ONLY. This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending BAA preproposals regarding this requirement to DEVCOM-SC via e-mail ONLY to michael.s.wiederoder.civ@army.mil, richard.j.green.civ@army.mil and jean.m.trumpis.civ@army.mil by 23 November 2026, 5:00 PM EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Submissions should include: Whether you are proposing product development and/or consumer research and/or sample demonstration. A detailed description of your technical approach. Relevant past performance or corporate experience. A rough order of magnitude (ROM) cost estimate for the proposed work or samples. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. QUESTIONS: Any questions for clarification may be emailed to michael.s.wiederoder.civ@army.mil, richard.j.green.civ@army.mil and jean.m.trumpis.civ@army.mil no later than 18 November 2026, 5:00 PM EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
-Market Research11/23/2026
This Broad Agency Announcement (BAA) covers the following areas of scientific and technical areas of expertise: A. COMBAT FEEDING COMBAT FEEDING EQUIPMENT AND SYSTEMS COMBAT RATION RESEARCH AND DEVELOPMENT B. SOLDIER PROTECTION AND SURVIVABILITY WARFIGHTER SYSTEMS TECHNOLOGIES 1. Integrated Protective Headborne Equipment and Injury Diagnostic/Assessment Tools. 2. Modular Personal Protection Equipment (MPPE) and Injury Diagnostic/Assessment Tools. 3. Chemical/Biological Protection for Individuals. 4. Countersurveillance. 5. Body Worn Interactive Materials. 6. Materials Nanotechnology. 7. Advanced Protection, Integration Technologies/Systems and Assessment Methods. 8. Integrated Sound, Light and Blast Management for the Ears and Eyes. B. TEXTILE TECHNOLOGIES 1. Multi-Functional Materials. C. MODELING AND SIMULATION 1. Individual Ground Soldier and Small Unit Operational Effectiveness and Survivability. D. SOLDIER EFFECTIVNESS 1. Body-Worn Systems, Hand-Held Devices, Smart-Lightweight Electronic Components, and Information processing to Increase Soldier Maneuverability and Protection through on-Soldier Sensing, Remote Sensing, and Knowledge Management 2. Biomechanics 3. Anthropometry 4. Warrior Performance 5. Soldier Power Sources, Power & Data Distribution and Management 6. Future Warrior Technology Integration. 7. Technology Assessment and Simulation Tools. 8. Ecological Approach to Warfighter Survivability; Perception-Action-Cognition 9. Soldier Centric Sensors, Information Portrayal, & Data Management Technologies. 10. Soldier/Squad Performance Optimization. 11. Human Factors 12. Soldier Intelligence, Surveillance, and Reconnaissance (ISR) 13. Biotechnology 14. Physical Performance Technologies E. EXPEDITIONARY MANEUVER SUPPORT Research and Development. Electromagnetic Interference/Electromagnetic Pulse (EMI/EMP) Protection Environmental Protection and Energy Efficiency Maneuver and Movement/Sustainment: Deployment/Durability Functional Integration of Multiple Technologies Miscellaneous F. AERIAL DELIVERY ADVANCED PERSONNEL AND CARGO AIRDROP SYSTEMS G. SIMULATION AND TRAINING TECHNOLOGY Live Training Simulation and Battlefield Effects: Medical Simulation and Training Advanced Interactive Simulation Cyberspace Warfare for Training (CyWar-T) Adaptive Instructional Systems Battlespace Visualization and Interaction Digital Environments and Battlespace Creation Artificially Intelligent Agents Collaboration with the Institute for Creative Technologies
-Solicitation02/27/2030
The mission of the U.S. Army Combat Capabilities Development Command Soldier Center (DEVCOM SC) is to “Maximize the Warfighter’s Survivability, Sustainability, Mobility, Combat Effectiveness and Field Quality of Life by Treating the Warfighter as a System.” Our focus is to deliver world class research, development, systems engineering, and services with a unique human-centric focus by: cultivating a highly motivated, expert, and agile workforce. exceeding customer and stakeholder expectations. delivering what we promise at an unprecedented pace and honoring our commitments. fostering long term strategic partnerships and collaborations with key customers, other Government agencies, industry and academia. General information on DEVCOM SC can be obtained from the DEVCOM SC website at https://ccdcsoldiercenter.army.mil/ Under the authority of 10 U.S.C. 4022, DEVCOM SC seeks to award funding through Other Transaction Agreements (OTAs or Agreements) to non-traditional and traditional defense contractors for prototype projects within DEVCOM SC’s Areas of Interest. DEVCOM SC is interested in efforts directed toward the development of enabling technologies that speed up the advanced development process. This Broad Other Transaction Authority Announcement (BOTAA) provides information, submission instructions, evaluation and selection criteria, and award administration. How the process works: Offerors may submit preproposals against any area of interest listed in §IV. Additional areas of interest may be issued through a Request for Project Proposal. (Note: Guidelines for the requirements of a preproposal are listed in §III B 1.) Preproposals are reviewed by the Government. If there is interest, the Government will reply with a Request for Full Proposal (RFFP) within 60-90 days. (Note: The Guidelines for all required information needed for a full proposal is explained in §III B 2.) The offeror will prepare and submit the full proposal within the period of time stated in the RFFP. This is generally set at 30 days. Once received, the Government will evaluate the proposal. Discussions among the parties, whether verbally or in writing, will occur as appropriate. The Government will send an agreement to the offeror. Additional discussions will occur as necessary. Awards will be made after evaluation and selection of a successful proposal. (Note: Awards are dependent upon the availability of funds.) The full DEVCOM-SC BOTAA Document is attached herein.
-Special Notice06/08/2027
Contracts for a new HTRW MATOC pool are anticipated to be awarded to a minimum of three small contracts and up to three unrestricted contracts with a total value of up to $49,000,000.00. The location of the work to be performed under this contract shall be primarily in the six New England states but will also include other states and districts within the North Atlantic Division mission area. The work may involve performing Site Inspections, Remedial Investigations, Feasibility Studies, Proposed Plans, Records of Decision, Engineering Evaluation and Cost Analysis, Remedial Designs, Removal Designs, Removal Actions, Interim Removal Actions, and/or Remedial Actions at HTRW sites that are being addressed through the U.S Environmental Protection Agency (USEPAs) Superfund Program, the Department of Defense (DoDs) Base Realignment and Closure Program (BRAC) and Defense Environmental Restoration Program (DERP) Formerly Used Defense Sites (FUDS) Program, and other Interagency Support Customers. HTRW work performed for USACE must generally comply with the DERP statute [10 United States Code (USC) 2700 et seq.], the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) 42 USC 9601 et seq., Executive Orders (EOs) 12580 and 13016, the National Oil and Hazardous Substances Pollution Contingency Plan (NCP), and all applicable DoD and Army policies.
-Solicitation01/29/2027
This is a request for information (RFI) only for capabilities and experience which show potential for meeting the requirements described below. This is not a Request for Quotation (RFQ), Request for Proposal (RFP) or an Invitation for Bid (IFB). It is a market research tool being used to determine the availability and adequacy of potential sources for planning purposes only. Responses to this notice are not considered as offers and cannot be accepted by the Government to form a binding contract. The Government does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information presented or the use of any such information. 1. Purpose The Joint Project Manager for Chemical, Biological, Radiological, and Nuclear Protection (JPM CBRN P) is conducting a market survey to identify industry capabilities, experience, and potential approaches for serving as a Product Support Integrator (PSI) and material integration support for the Chemically Protected Deployable Medical System (CP DEPMEDS) Reconfiguration and Technology Refresh effort. The Government seeks a commercial partner capable of procuring and coordinating the delivery of commercially available components; receiving, tracking, and consolidating Government-sourced components; applying Item Unique Identification (IUID) markings as required; maintaining materiel accountability and readiness; conducting Preventative Maintenance, Checks and Services (PMCS) and Care of Supply in Storage (COSIS) as necessary, and delivering verified, complete component packages to Pine Bluff Arsenal (PBA) for final system integration, build completion, and packaging. This RFI is issued solely for planning and market-research purposes. It does not constitute a solicitation, request for proposal, commitment by the Government, or authorization to incur costs. The Government will not reimburse respondents for costs associated with preparing or submitting a response. 2. Background CP DEPMEDS is a fielded CBRN protection system that supports Army Role 3 field-hospital operations. The program is executing a reconfiguration and technology-refresh effort using fielded, previously qualified, and commercially available components. The revised support concept under consideration would use a commercial PSI to integrate component procurement, Government-furnished or Government-sourced materiel coordination, traceability, IUID marking, and delivery to Pine Bluff Arsenal (PBA). PBA would retain responsibility for final assembly/integration of CP DEPMEDS sets, final packaging, associated Government acceptance activities, and delivery of sets to their fielding/final destination. 3. Scope of Information Requested The Government seeks information on industry capability to perform the following functions: A. Commercial Component Procurement Procure commercially available components identified by the Government. Conduct vendor management and order placement of components. Identify long-lead items, supply-chain constraints, discontinuance risks, and proposed alternate sources. Provide proposed substitutes only when specifically authorized by the Government. Manage warranties, vendor documentation, certificates of conformance, and commercial shipping documentation as applicable. B. Government Component Coordination Coordinate receipt, transfer, and consolidation of Government-sourced components from designated Government organizations, depots, supply activities, or other locations. Maintain accountability for Government-provided or Government-directed materiel while in contractor custody. Maintain COSIS to prevent environmental degradation, corrosion, and shelf life expiration of stored equipment and supplies. Reconcile shipping discrepancies, damaged materiel, shortages, overages, and documentation issues. Maintain traceability between each component, its source, and its assigned CP DEPMEDS configuration or set. Note: The contractor would not independently obligate Government funds or direct Government supply activities. The Government would retain authority for requisitions, funding, release, acceptance, and disposition decisions. C. IUID and Asset Identification Apply, validate, and document IUID markings for designated end items and components in accordance with Government-furnished requirements and applicable standards. Verify marking quality, placement, readability, and association with the correct item record. Maintain item-level records linking serial number, part number, National Stock Number, Unique Item Identifier, source, and destination. Provide electronic IUID and asset-accountability data deliverables in a Government-specified format. D. Materiel Receiving, Inspection, and Staging Receive and inspect commercial and Government-sourced components. Verify quantities, part numbers, serial numbers, condition, shelf life, and required documentation. Store and stage components in a manner that preserves condition, supports shelf-life management, and enables rapid consolidation into required delivery packages. Maintain COSIS to prevent environmental degradation, corrosion, and shelf life expiration of stored equipment and supplies. E. Kit Completion and Delivery to PBA Build component-level shipping packages in accordance with Government-approved bills of material, configuration lists, and delivery priorities. Conduct kit-completeness checks before shipment. Package, preserve, mark, and ship components to PBA in accordance with Government-approved shipping instructions. Provide advance-shipment notifications, packing lists, serial-number/IUID records, and discrepancy reports. If required, travel to PBA to help support the delivery and inventory of shipped equipment. F. Program Management and Reporting Maintain an integrated procurement and delivery schedule. Provide recurring status reports addressing procurement status, component availability, shortages, long-lead risks, delivery forecasts, IUID status, kit completion, and shipment status. Identify risks early and recommend mitigation actions, including alternate vendors, phased deliveries, or proposed substitutes. Participate in Government-led integrated product team meetings as required. 4. Desired Capabilities Respondents should describe experience performing comparable work involving: Multi-vendor procurement and materiel integration; Government-furnished property or Government-directed materiel; IUID marking, validation, and data management; Military logistics, asset accountability, and shipping documentation; Kitting, staging, packaging, preservation, and shipment of complex equipment; Supply-chain risk management and long-lead-item mitigation; CBRN, deployable medical, field-hospital, shelter, or comparable expeditionary equipment. (Note: This is desired experience but not required for response.) The Government is particularly interested in respondents able to manage multiple sources of supply and coordinate delivery of components to a Government integration location. 5. Industry Response Instructions Responses should not exceed [15] pages, excluding attachments. Include: Company Information: Name, UEI, CAGE code, business size, socioeconomic status, and points of contact. Relevant Experience: Up to three relevant efforts performed within the past five years. Technical Approach: Notional approach to commercial procurement, Government-component coordination, IUID, accountability, staging, kit verification, and delivery to PBA. Facilities and Workforce: Relevant facilities, quality systems, logistics staff, IUID capability, and geographic support model. Data and Reporting: Proposed methods for inventory visibility, serialized-item traceability, IUID data delivery, and Government status reporting. Risk Management: Principal risks, including vendor lead time, part obsolescence, Government materiel availability, configuration changes, and transportation delays. Rough-Order-of-Magnitude: Estimated startup period, staffing approach, major cost drivers, and recommended contract structure. The Government requests that responses be submitted electronically to melissa.b.smith23.civ@army.mil, and veronica.a.stclaire.civ@army.mil. The email title should read “CP DEPMEDS Integrator RFI Response - [Vendor Name]”. Responses shall be received NLT COB 28 November 2026.
-Market Research11/28/2026

Additional Details

Solicitation Number

W911QY13R0036

Archive Date

May 28, 2014