GovChime
Notice ID: a3ca5d714ea9b498a2b84cb3dcae3f59Award NoticeAwarded

39--Overhead Bridge Crane 5 Ton

Awarded on June 23, 2015. Full description on SAM.gov.

Awarded tounder W911RQ15P0079 (source: SAM.gov award notice)• $41.9K

Overview

Posted
June 25, 2015
Notice type
Award Notice
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC RRAD
Place of performance
ACC- Warren (ACC-WRN)(RRAD) ATTN: CCTA-HDR, 100 Main Drive, Building 431 Texarkana TX 75507-5000 US
PSC
39: MATERIALS HANDLING EQPT
Last updated
Dec 5, 2025
Award date
Jun 23, 2015
Award amount (SAM.gov award notice)
$41.9K

Identifiers

Solicitation number
W911RQ15T0027
Notice ID
a3ca5d714ea9b498a2b84cb3dcae3f59
Award number (PIID)
W911RQ15P0079

Description

Overhead Bridge Crane 5 Ton

Full description on SAM.gov

Award Overview

Award Number

W911RQ15P0079

Award Amount (SAM.gov award notice)

$41.9K

Award Date

Jun 23, 2015

Awardee

Awardee UEI

WZNNLYQ58NJ5

Original Solicitation

Notice ID: a3ca5d714ea9b498a2b84cb3dcae3f59

Posted Date: Jun 25, 2015

Original Response Deadline: Not specified

Contacts

Contracting Officer

Primary Contact

Eugene A Peterson Jr, 903-334-2206 ACC- Warren (ACC-WRN)(RRAD)

Documents

No documents available.

Lifecycle

Solicitation:W911RQ15T0027
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. 6×
    Pre-SolicitationFeb 6, 2015

    39--Top Running Bridge Cranes with Hoist

    Notice bc5d29bda2839e229fcae699d3dbdb1b on SAM.gov

  2. SolicitationApr 3, 2015

    39--Top Running Bridge Cranes with Hoist

    Notice 8c928726384337dd386596a539e7d0ca on SAM.gov

  3. 3×
    AwardedCurrentJun 25, 2015

    39--Overhead Bridge Crane 5 Ton

    Notice a3ca5d714ea9b498a2b84cb3dcae3f59 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE (RFQ) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS IS STRICTLY VOLUNTARY. Your response to this Sources Sought shall be electronically submitted to the Contract Specialist, Harold "Jay" Russell, Jr., in either Microsoft Word or Portable Document Format (PDF), via email to harold.w.russell.civ@army.mil. Reference this synopsis number in subject line of e-mail and on all enclosed documents. Market research responses received after the time and date specified will be determined to be late and may not be considered. Information and materials submitted in response to this request WILL NOT be returned.
-Market Research11/05/2026
THE PURPOSE OF THIS CONTRACT IS TO AWARD A FIVE YEAR-YEAR FIRMED FIXED PRICE, INDEFINITE DELIVERY INDEFINITE QUANTITY TYPE CONTRACT FOR THE FOLLOWING: NOUN: COMPRESSOR UNIT NSN: 4310-01-508-5885 PART NUMBER: 11474218-2 QUANTITY: MINIMUM 200 EACH/ MAXIMUM 350 EACH THIS SOLICITATION IS RESTRICTED TO TRANSDIGM INC. (81833). For complete details, please see the attached Solicitation Document (W31P4Q-27-R-A010).
-Solicitation11/26/2026
Please see solicitation
-Combined Synopsis01/26/2026
Low Level Cranes
-Solicitation11/30/2026
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
-Combined Synopsis11/13/2026

Additional Details

Solicitation Number

W911RQ15T0027

Archive Date

Jul 25, 2015