Department of the Army Criminal Investigation Division (DACID) Proactive Threat Platforms
Active, responses due . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EST
- Posted
- November 9, 2026
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.FDO EUSTIS.W6QM MICC-FDO FT EUSTIS
- Place of performance
- Quantico, Virginia
- Last updated
- Nov 9, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911S0DACID
- Notice ID
- 529e78e20f254721b8ab15d729df81a6
Description
DACID requires an advanced, cloud-hosted commercial threat intelligence and investigative software platform that bypasses the limitations of legacy, keyword-based Open-Source Intelligence (OSINT) tools by leveraging automated behavioral analytics, machine learning, and artificial intelligence. The service must deliver a unified, secure digital environment that dynamically tracks threat actors across decentralized, darknet, and encrypted ecosystems; automatically decodes highly coded sub-cultural slang and memetic extremist iconography; resolves fragmented online monikers and metadata back to single real-world targets; and provides zero-trust managed attribution virtual environments for undercover operations, all while capturing disappearing digital evidence in a forensically sound, court-admissible format.
Please see attachment 'DACID RFI SAM_09 NOV2026' for guidance.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Lifecycle
- 1Version 1Sources SoughtCurrent
Department of the Army Criminal Investigation Division (DACID) Proactive Threat Platforms
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This Sources Sought / Market Research Capabilities Questionnaire is issued to identify and assess potential industry capabilities, small-business participation, and acquisition-strategy considerations for a potential design-build construction project involving Active Vehicle Barrier Control System (AVBCS), guard booth, and associated access control point (ACP) infrastructure improvements at Shop Gate and Adams Gate, Fort Lee, Virginia. This notice is issued for planning and market-research purposes only. It is not a solicitation, request for proposal, request for quotation, or commitment by the Government to award a contract. This notice does not restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for costs associated with preparing or submitting a response. Responses are not offers and cannot be accepted by the Government to form a binding contract. The Government does not intend to rank submittals, provide individualized feedback, or return responses. Responses will be used to assess industry capability, small-business participation, acquisition strategy, scope packaging, potential sources, construction phasing, and schedule and supply-chain risk. This notice does not constitute a request for pricing. | - | Market Research | 11/18/2026 |
This procurement will be conducted through Unison Marketplace and Unison Marketplace only. Any offers outside of Unison Marketplacewill not be valid and are ineligible for award. https://marketplace.unisonglobal.com/fbweb/buyerNavigation.do?buyId=1214786&resource_name=marketplace> | - | Combined Synopsis | 11/24/2026 |
***ADDRESS HAS BEEN UPDATED in the LOCATION/LOGISTICS SECTION*** The U.S. Army Corps of Engineers (USACE) Louisville District is issuing this special notice to announce an Industry Day for upcoming construction requirement for Construction of a 300-member Army Reserve Center (ARC) at Defense Supply Center, Richmond, VA. The Louisville District is considering Construction Manager at Risk (CMAR) under 10 USC §2808a Other Transaction Authority for this requirement. This notice is for informational and planning purposes to allow interested parties to prepare for and provide feedback prior to the official Request for Qualifications (RFQ) release. INDUSTRY DAYS USACE intends to conduct an Industry Day on 19 November 2026 at 0900 Eastern Time to provide an overview of the project, potential acquisition strategy, and anticipated requirements. This event will provide interested parties with an opportunity to gain additional insight into the project and potential Construction Manager at Risk (CMAR) approach under an Other Transaction (OT) framework, ask questions, and provide input in advance of the official RFQ release. General questions from industry participants will be permitted during the Industry Day; however, all discussions and responses provided during the event are considered unofficial and for informational purposes only. Statements made during the Industry Day do not constitute commitment, authorization, or binding guidance related to the future RFQ. Official Questions and Answers (Q&A) will be accepted and addressed following the release of the RFQ. Contractors and subcontractors interested in participating are requested to submit their Name, Company Name and contact information (email and phone) to the USACE Contracting Specialist no later than 1600 on 17 November 2026. Please use the information below to request Installation/Base access: Step 1: Badge Requests: To obtain pass/badge for one day or more, the contractor shall complete DBIDS pre-registration online using the following link DBIDS Pre-Enrollment or at https://dbids-global-enroll.dmdc.mil/preenrollui/#/landing-page. Once pre-registration has been complete, the visitor/contractor shall record and send the QR code/alpha-numeric code as a PDF/screenshot to the COR/PM via email (if multiple people are visiting or being vetted, the contractor shall compile all QR/alpha-numeric codes into a single email) at least 5 business days prior to visit/start date. The contractor shall include requested dates, times and names of personnel in the email. Failure to provide all the above information may lead to delays in requests being processed which could result in missed site visits, meetings etc. The COR/PM will notify the contractor upon their approval or denial. If approved, the contractor will have 30 days to pick up their visitor pass or project badge. When picking up the project badge the contractor is required to present their QR or alphanumeric code along with a valid form of ID. When filling out the QR code form, for the Service Site - select All. State – Virginia. Filter – Defense Logistics Agency Richmond. Note, a valid DOD ID card (Retired military, CAC etc.) is NOT permitted to be used to enter DCSR for commercial purposes. Step 2: Send a copy of their QR codes to Steven.Hall@DLA.MIL and he can forward them to security for vetting. Usually security will get back within a day or two of the submittal and let me know if they’ve been approved or not and then they are able to come and pick up a badge at the pass office. LOCATION/LOGISTICS Industry Day Presentation Location: 6090 Strathmore Road (Bldg 70), North Chesterfield, VA 23237 (Red, brick building with a large chimney right past the visitors center when you enter the gate) NOTE: Onsite parking space may be limited, overflow parking is available in the vicinity. PROJECT OVERVIEW Project Title: Construction of Army Reserve Center (ARC) Location: Richmond, Virginia Agency: U.S. Army Corps of Engineers, Louisville District NAICS Code: 236220 PROJECT DESCRIPTION Primary facilities include a 56,500 SF Army Reserve Center and 1200 SF Unheated Storage Building. Facilities will be designed in accordance with the Army Reserve Design Guide. Supporting facilities include land clearing, general site improvements, lighting, walks, signage, curbs and gutters, storm drainage, paving, information systems, and utility connections. Sustainability/Energy and cybersecurity measures are included. All fixtures, furnishings, and equipment will be provided. Antiterrorism force protection and physical security measures will be incorporated into the design including minimum standoff distances from roads, parking areas and vehicle unloading areas. Access for individuals with disabilities will be provided. Facilities will be designed to a minimum life of 40 years in accordance with DoD's Unified Facilities Criteria 1-200-02 including energy efficiencies, building envelope and integrated building systems performance. The project contains options such as: Bona fide need collateral equipment. The Contract Duration is estimated at 790 calendar days from Notice to Proceed on Construction Award. ACQUISITION STRATEGY – PRE-AWARD USACE, Louisville District plans to use a streamlined competitive selection process: Step 1 – White Papers/Qualification Statements: Interested parties will submit a Statement of Qualifications (max # of pages to be defined in formal RFQ. Following evaluation of the qualification packages, the Government intends to down-select a target of three (3) highest qualified firms to proceed to Step 2. Step 2 – Pitch Presentations: Down-selected firms will participate in live pitch meetings. One company will be selected as the Construction Manager for negotiation and award of Agreement 1 for preconstruction services. The Government intends to negotiate a Guaranteed Maximum Price (GMP) for construction of the ARC, which will be added as a bilateral modification at a later date. ACQUISITION STRATEGY – AWARD The agreement would be awarded to the most qualified Construction Manager at Risk (CMAR) to provide preconstruction services and construction. Phase 1 of the CMAR agreement would include pre-construction services. The selected CMAR would act as an expert consultant to the Government, collaborating directly with USACE and the third-party Designer of Record during active design progression. The Government’s intent is to award the Phase I Agreement for Preconstruction Services prior to the 95% design review meeting. Phase 2 of the agreement would include scope for all construction activities necessary to complete the project. The agreement will be Firm-Fixed-Price (FFP). All interested parties should monitor the official solicitation announcement, which will provide complete details and submission instructions. Draft documents may be provided at a future date for feedback and informational purposes only and are subject to change upon issuance of the formal Project RFQ. VIRTUAL PARTICIPATION OPPORTUNITY For those who are unable to attend the Industry Day event in person, the Louisville District plans to stream the event through Microsoft Teams. The details related to the MS Teams event are provided below: Microsoft Teams Meeting Join: https://dod.teams.microsoft.us/meet/993202545806?p=OoGJrDe3gE2XSV5cjy Meeting ID: 993 202 545 806 Passcode: aR7VH6d9 | - | Special Notice | 11/16/2026 |
Description Request for Information (RFI) – Augmented Reality, Command, Control, Communicate, Coordinate (ARC4) Software and Support Services The U.S. Army Contracting Command-Detroit Arsenal (ACC-DTA) is seeking information from industry partners regarding their experience with ARC4 software and their capability to provide ARC4 software & support services. Introduction 1. This RFI is being issued solely for information and planning purposes and is not a solicitation for services. Responses shall not contain any proprietary data from the responding company. The contracting organization responsible for this effort is Army Contracting Command – Detroit Arsenal (ACC-DTA). Telephone requests for additional information or to request a meeting to discuss this request will not be honored. Furthermore, those who respond to this RFI should not anticipate feedback with regards to its submission; other than acknowledgement of receipt. 2. This RFI does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. A solicitation is not available at this time; requests for a solicitation will not receive a response; unsolicited proposal responses to this request will not be considered as offers. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary, therefore the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. All responses to this RFI become the property of the Federal Government and will not be returned. 3. Not responding to this RFI does not preclude any vendor from participating in any future RFP, if any is issued. If a solicitation is released, it will be synopsized via the System for Award Management (SAM.gov) website. It is the responsibility of vendors to monitor this website for additional information pertaining to this requirement. Experience with ARC4 Software Vendors shall describe their experience with ARC4 software. The vendor’s experience should demonstrate an in-depth and expert knowledge of the ARC4 software. Capability to Provide ARC4 Software and Support Services Vendors shall describe their capabilities to: Design, develop, integrate, test, and maintain all ARC4 software required for the integration of the ARC4 software into systems designated by the Government. Design, develop, integrate, test, and maintain all Intra-Soldier Wireless (ISW) emulator software to simulate systems. Produce, integrate, test, debug, deliver, document, and maintain any software that needs to be developed for the ARC4 software integration with Army vision systems. Produce, integrate, test, debug, deliver, document, and maintain any software that needs to be developed for the ISW Emulator to support new features, addition of new modules, updates to existing software and bug fixes. Develop ARC4 software tools and utilities as required to support integration of ARC4 software. Perform ARC4 software configuration management, to include the developing, maintaining, and updating ARC4 Software Version Documents, System/Subsystem Specifications, System/Subsystem Design Descriptions, and Software User Manuals. Develop, maintain, and update a ARC4 Software Development Kit (SDK) that enables third party vendors to integrate ARC4 more independently into their systems as well as extend the ARC4 feature set with new capabilities. Support Government designated vendors in designing, developing, and integrating the ARC4 software into their vision system and train the Government designated vendors on all software applications supporting ARC4 system operation, test, and evaluation. Assist the Government by providing technical knowledge of the ARC4 software and integration into vision systems. Provide this required support by providing subject matter experts (SMEs) with domain knowledge of ARC4 system integration, evaluation, and requirements design. Provide engineering field support services as required to support the integration of the ARC4 into the Army vision systems to include support of planning, coordination, set-up, execution, data collection and analysis. Provide software engineering and subject matter expert support in installing, integrating, operating, and evaluating ARC4 software applications. Provide support as needed for Government training using the ARC4 software in vision systems. RFI Response: Format and Submission Respondents are requested to highlight their industry experience with ARC4 software and their capabilities to provide ARC4 software & support services based upon the information and requirements presented in this RFI. Responses are limited to the following: a page limit of five (5) pages maximum, typed in Times New Roman, size 12 font, single spaced, one (1) inch margins. The Vendor responses to this notice shall include the following information: Vendor's name, address, business size (Large, Small, or any other small/socio-economic type), point of contact, phone number, and e-mail address. Vendor's description of their experience with ARC4 software. Vendor’s description of their capability to provide ARC4 software support services. 2. Vendor responses to this notice shall be submitted to: Points of Contact: Lieselotte H. Pattee; lieselotte.h.pattee.civ@army.mil Time/Date: Responses shall be submitted to the above stated Points of Contact no later than 1500 EST, 16 November 2026. | - | Special Notice | 11/16/2026 |
SOURCES SOUGHT / REQUEST FOR INFORMATION (RFI) Power Distribution and Illumination Systems, Electrical (PDISE) Issuing Agency: Department of the Army, Army Contracting Command – Aberdeen Proving Ground (ACC-APG), Belvoir Division Portfolio Acquisition Executive (PAE): PAE Agile Sustainment & Ammunition (PAE ASA) Project Manager (PM): PM Expeditionary Energy and Sustainment Systems (PM E2S2) NAICS Code: 335999 (Miscellaneous Electrical Equipment and Component Manufacturing) and 335313 (Switchgear and Switchboard Apparatus Manufacturing) PSC / FSC Code: 6150 (Miscellaneous Electric Power and Distribution Equipment) Classification Code: 61 (Electric wire, and power and distribution equipment) Notice Type: Sources Sought / Request for Information (Market Research under FAR Part 10) 1.0 DISCLAIMER & SPECIAL NOTICES This is a Request for Information (RFI) / Sources Sought Synopsis issued solely for information and planning purposes in accordance with FAR 15.201(e) and FAR Part 10. This notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or an obligation on the part of the Government to acquire any products or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government will not pay for information submitted in response to this RFI, nor will it reimburse respondents for any costs incurred in preparing responses. Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED. All submissions become Government property and will not be returned. 2.0 PROGRAM BACKGROUND & SCOPE The PM E2S2 has a potential requirement for the build-to-print manufacture, assembly, first article inspection, preproduction First Article testing, and delivery of the PDISE family of systems and associated components and packaging. PDISE is a standardized, ruggedized, man-portable family of electrical feeder and distribution equipment that connect mobile power generation equipment and warfighter mission equipment in harsh tactical environments across Multi-Domain Operations (MDO). The PDISE family consists of five Government-owned Technical Data Package (TDP) end-item Configuration Items (CIs) and their associated accessories. For this acquisition, only four of those end-items are required. The M60 A/P Distribution System is not anticipated to be included in this acquisition effort. The following systems will be procured: M200 A/P Feeder System: 3-Phase, 200 Amperes/Phase (MIL-DTL-53126/1; Drawing 13229E6350) (NSN 6150-01-308-5672) M100 A/P Feeder System: 3-Phase, 100 Amperes/Phase (MIL-DTL-53126/2; Drawing 13229E6351) (NSN 6150-01-308-5671) M40 A/P Distribution System: 3-Phase, 40 Amperes/Phase (MIL-DTL-53126/3; Drawing 13229E6353) (NSN 6150-01-307-9446) M46 Utility Assembly: Electrical Receptacles and Illumination Kit (MIL-DTL-53126/5; Drawing 13226E7046) (NSN 6150-01-208-9751) Procurement Baseline: Build-to-print execution using existing Government TDPs, MIL-DTL-53126, and associated specification slash sheets. TDPs for the PDISE systems are available upon request. 3.0 PURPOSE OF THIS RFI The Government seeks to determine: The availability of qualified large and small business sources under NAICS 335999 and 335313 capable of manufacturing, testing, and delivering the PDISE family of systems. Industry capacity and lead times for manufacturing and assembling heavy-duty electrical power-distribution equipment, including Class L connectors, ruggedized cables, military packaging and specialized circuit breakers. Vendor capability to conduct First Article Testing (FAT) and environmental testing per MIL-DTL-53126. Rough Order of Magnitude (ROM) unit cost for each item. The feasibility of small business set-asides (e.g., Total Small Business, 8(a), HUBZone, SDVOSB, or WOSB). 4.0 SPECIFIC INFORMATION REQUESTED (VENDOR QUESTIONNAIRE) Interested vendors are requested to provide clear, detailed responses to the questions below. Generic corporate marketing brochures that do not directly address these technical and manufacturing questions will not be considered. Section A: Corporate & Business Information Company Profile: Provide Company History (years in business), Name, Address, Website, CAGE Code, and Unique Entity Identifier (UEI) under SAM.gov. Business Size Standards: State your business size (number of employees) and socio-economic status under NAICS 335999 and 335313. Specify if your firm is: Large Business Small Business (SB) Small Disadvantaged Business (SDB) / 8(a) Service-Disabled Veteran-Owned Small Business (SDVOSB) Historically Underutilized Business Zone (HUBZone) Woman-Owned Small Business (WOSB / EDWOSB) Role & Teaming Intent: Do you intend to respond to a solicitation as a Prime Contractor, Joint Venture / Teaming Partner, or Subcontractor? If teaming or subcontracting, describe proposed workshare allocations and your strategy to satisfy the Limitations on Subcontracting (FAR 52.219-14). Workload: If your company is awarded the contract, will you be able to perform at least 50% (percent) of the work required in house? Relevant Corporate Experience and Past Performance: Provide up to three examples of recent, relevant efforts involving build-to-print manufacture, inspection, testing, and delivery of ruggedized electrical distribution equipment, cable assemblies, or comparable military hardware. For each example, identify the customer, period of performance, scope, quantities, contract value, and customer point of contact, if available. Limit each past-performance example to two pages. Section B: Build-to-Print Manufacturing & Technical Capabilities TDP & Specification Conformance: PDISE requires fabrication to Government TDPs without redesign. Describe your facility’s experience manufacturing ruggedized power distribution centers, electrical enclosures, and high-power tactical cables to Government drawings (ASME Y14.100 / MIL-STD-31000). Tooling & Production Processes: Describe your capabilities for: Heavy-gauge multi-conductor power cable assembly. Assembly and wiring of circuit breaker inside distribution enclosures. Integration of MIL-DTL-22992 (Class L) heavy-duty cylindrical connectors into enclosures and cabling. Facilities and Production Control: Describe the availability, size, and location of facilities; manufacturing equipment; production capacity; production-control processes; records-management practices; and reporting systems used to support cost, schedule, and performance requirements. Chemical Agent Resistant Coating (CARC): PDISE enclosures require pre-treatment and painting conforming to MIL-DTL-53072 and SAE-AMS-STD-595. Does your facility possess in-house CARC painting capabilities or do you rely on qualified third-party coating vendors? Packaging & Wood Packaging Material (WPM): Can your facility provide military preservation, marking, and crating conforming to Drawings 13230E7021/7020/7019? Manufacturing Readiness Level (MRL): What is your current assessed Manufacturing Readiness Level for this class of tactical electrical distribution hardware? In-Process and Final Inspection: Describe your processes for receiving inspection of components and materials, in-process inspection, final inspection, nonconformance control, and documentation of inspection of completed PDISE or similar end items, as applicable. Section C: First Article Testing (FAT) & Environmental Qualification In-House vs. Subcontracted Testing: PDISE First Article Preproduction Inspection (FAT) requires 2 units per configuration tested within 180–360 Days After Contract Award (DACA). Identify whether your company possesses internal testing facilities or an established relationship with a DoD-certified laboratory to conduct First Article Testing in accordance with MIL-DTL-53126. Failure Escalation & Root Cause Analysis: Describe your engineering experience and/or procedures for performing root cause failure investigations and delivering Failed Item Analysis Reports (FIARs) and Test Incident Reports (TIRs) (DI-MISC-80711). Section D: Quality Management & Configuration Control Quality Certifications: Is your quality management system certified to ISO 9001:2015, AS9100D, or an equivalent standard? Provide certificate numbers and registrar details. Configuration Management System (CMS): The contractor cannot deviate from the TDP without formal Government approval via Engineering Change Proposals (ECPs) or Requests for Variance (RFVs). Describe your formal configuration management process for tracking baseline changes in accordance with MIL-STD-3046 and MIL-HDBK-61. Section E: Supply Chain Resilience, Surge Capacity & Lead Times Long-Lead Material Availability: Certain components (e.g., MIL-DTL-22992 Class L connectors, Mil-Spec lumber, specialized Mil-Spec circuit breakers and cables) historically experience extended lead times. What are your current supplier’s lead times for these or similar critical long-lead items? How does your company mitigate obsolescence and supply chain disruptions? Production Throughput & Surge Capacity: What is your estimated monthly steady-state production throughput for PDISE systems (M200, M100, M40, M46)? What is your maximum surge capacity (percentage increase above steady-state) that could be sustained under Defense Priorities and Allocations System (DPAS) rated orders (e.g., DO/DX ratings)? Army Arsenal Integration (Make-or-Buy): In accordance with the Army Make-or-Buy policy (DI-MGMT-82398), prime contractors must assess manufacturing end-item components within the US Army Arsenal System (e.g., Rock Island Arsenal, Watervliet Arsenal). Does your organization have prior experience partnering with or evaluating Army Arsenals for component production? Section F: Past Performance & Rough Order of Magnitude (ROM) Relevant Experience: Provide up to three (3) examples of contracts completed or performed within the past five (5) years involving the manufacture, testing, or delivery of tactical electrical distribution, high-voltage vehicle power systems, or comparable DoD equipment. Include: Contract Number & Customer / Agency Total Dollar Value Period of Performance Specific Scope Executed (Prime vs. Subcontractor) Lead Time to First Delivery: Provide an estimated timeline (Months After Contract Award) for: First Article Preproduction Unit fabrication (Target: ≤180 DACA) First Article Testing completion and report submittal (Target: ≤360 DACA) Production delivery commencement following FAT approval Section G: ROM PRICING BY QUANTITY RANGE Provide quantity-based, per-unit Rough Order of Magnitude (ROM) pricing for each of the anticipated end items: M200 A/P Electrical Feeder System, M100 A/P Electrical Feeder System, M40 A/P Electrical Distribution System, and M46 Electrical Utility Assembly. Provide ROM pricing for the following quantity ranges: 1–50, 51–100, and 101–200 units. Identify significant pricing assumptions, long-lead material considerations, and any quantity-price breakpoints. 5.0 SUBMISSION INSTRUCTIONS & FORMAT Submission Deadline: 11/20/2026 by 4:00 PM Eastern Time. Page Limit: Responses shall not exceed twenty (20) pages (excluding title page, executive summary, and certs/licenses), 8.5" x 11" paper, font size 12 pt for the body text and 10-11 pt for any text in table or graphics, Times New Roman font, with a minimum of one (1) inch margins all around. File Format: Deliver responses electronically in Adobe PDF or Microsoft Word format. Submission Channel: Submissions must be transmitted via email to the Contract Specialist and Contracting Officer: Contracting Officer: Rosetta Wisdom-Russell- rosetta.wisdom-russell.civ@army.mil Contract Specialist: Thao Trinh - thao.h.trinh.civ@army.mil Subject Line: RFI Response: PDISE Manufacturing Capabilities – [Company Name] 6.0 GOVERNMENT SUMMARY & NEXT STEPS The Government will evaluate market survey responses to determine the acquisition strategy, specifically whether a small business set-aside is warranted under FAR Part 19 or if full-and-open competition is required. Interested vendors are strongly encouraged to register in the System for Award Management (SAM) and ensure active status under NAICS 335999 and 335313. | - | Market Research | 11/20/2026 |
Additional Details
Solicitation Number
W911S0DACID
Archive Date
Dec 24, 2026
Office Address
FORT EUSTIS, VA, 23604-5538