Saw

Amendment to correct quantity of connecting rollers and extra blades. Amended to include set aside code. Horizontal Band Saw: PERFORMANCE/ CAPACITY ? Cycle Type: Semi-Automatic (Must support programmable cycle functions).; Miter Capability: Minimum of 60 Left and 60 Right Dual Swivel Head.; Cutting Capacity at 90 (Round): Minimum 11.75 in. (298.45 mm) diameter.; Cutting Capacity at 90 (Rectangle): Minimum 14 in. x 19 in. (355.6 mm x 482.6 mm).; Cutting Capacity at 45 (Round): Minimum 14 in. (355.6 mm) diameter.; Cutting Capacity at 60 (Round): Minimum 11.75 in. (298.45 mm) diameter.; Cutting Capacity at 60 (Rectangle): Minimum 11.75 in. x 8.5 in. (298.45 mm x 215.9 mm).; Band Speed: Infinitely variable speed range that includes 65 to 328 feet per minute (19.8 to 100 meters per minute), controlled by variable frequency drive.; Band Drive Motor: Minimum 4 HP (3.0 kW). SYSTEMS/ FEATURES ? Coolant Systems: Both a Flood Coolant System and a separate Mist Lubricator System.; Coolant System Motor: Minimum 0.5 HP (0.373 kW).; Coolant Reservoir: Minimum 5 gallons (18.9 liters).; Vise Type: Full Stroke Hydraulic.; Vise Pressure Control: Variable Vise Pressure Control.; Hydraulic System Motor: Minimum 0.5 HP (0.373 kW).; Hydraulic Reservoir: Minimum 3 gallons (11.4 liters).; Control Console: Movable/ Repositionable Control Console.; Head Feed Control: Rapid Head Down Approach and Fine Adjustment Head Feed Control.; Saw Head Design: Canted or Sloped saw head (e.g., 2-degree cant).; Saw Guides: Must utilize Carbide-Faced Saw Guides.; Band Tension System: Manual or Hydraulic system with visible tension indicator.; Band Cleaning System: Equipped with motor-driven cleaning brush.; Angle Positioning: Both a Spring-Loaded Detents and a Digitally Displayed Angle Position.; Height Sensor: Programmable Material Height Sensor.; Construction: Built with Heavy-Duty Counterbalance Springs and Cast Steel Band Wheels.; Safety Features: Includes Saw Blade Guards and Band Door Interlocks.; ELECTRICAL ? Main Power: 230V or 460V (+/- 10%), 60 Hz, 3-Phase, Wye configured power.; Full Load Amp Draw: Maximum 14A at 230V and Maximum 7A at 460V.; CONSTRUCTION/ DIMENSIONS ? Blade Width: Minimum 1.25 in. (32 mm), 34 mm industry standard acceptable.; Blade Length: Accommodates length range of 185 in. to 190 in. (4699 mm to 4826 mm).; Material Pass Line Height: Range of 31 in. to 33 in. (787.4 mm to 838.2 mm) from the floor.; WARRANTY/ ACCESSORIES ? Warranty: Minimum 10-year Manufacturers Warranty on parts.; Input and Output Conveyors: One (1) 5 ft (1.524 m) idler conveyor and one (1) 10 ft (3.048 m) idler conveyor.; Connecting Rollers: One (1) 360-RDL+TAL connecting rollers for the left side and one (1) 360-RDR+TAL connecting rollers for the right side suitable for angle cutting at a Minimum length of 3.3 ft (1000 mm), Minimum width of 20 in. (508 mm), and Minimum load capacity of 572 lbs/ft (851 kg/m), Extra Blades: Six (6) pack.; DOCUMENTATION ? Manuals: Operation and Parts Manuals.; Chart: Recommended Band Speed Chart.; ADDITIONAL REQUIREMENTS ? Spec Drawings: Available upon purchase.; Condition: Must be new (refurbished, rebuilt, or used units will not be acceptable).; Lead Time: No later than 3 weeks ARO (after receipt of order).; Delivery: Tooele Army Depot, Utah.