GovChime
Notice ID: 8874dcbd785d4293970319d906540401Combined Synopsis/Solicitation

NICKEL ALUMINUM BRONZE

Responses closed . Full description on SAM.gov.

Overview

Response deadline
1:00 PM CDT
Posted
May 14, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
331318: Other Aluminum Rolling, Drawing, and Extruding
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
Place of performance
ROCK ISLAND, ILLINOIS, 61299
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911S226U3244
Notice ID
8874dcbd785d4293970319d906540401

Description

NICKEL ALUMINUM BRONZE

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    NICKEL ALUMINUM BRONZE

    Notice 8874dcbd785d4293970319d906540401 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SOLICITATION AMENDMENT 1 IS POSTED TO ADD CONTRACTOR SUBMITTED QUESTIONS AND ANSWERS. ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED. SOLICITATION W519TC27QA033 FOR ALUMINUM BAR IS POSTED AS TOTAL SMALL BUSINESS SET ASIDE. PLEASE NOTE SPECIFICATIONS/REQUIREMENTS OUTLINED IN THE SOLICITATION.
-Combined Synopsis11/13/2026
38 EACH - BAR, FLAT- 49.55 Inch - .05 Inch LONG X .76 Inch - .02 Inch WIDE X .197 Inch -.02 Inch THICK34 EACH - BAR, FLAT- 49.55 Inch - .05 Inch LONG X .51 Inch - .02 Inch WIDE X .197 Inch - .02 Inch THICK
-Solicitation11/13/2026
ALUMINUM ALLOY SHEET
-Combined Synopsis10/19/2026
Railcar Spanner
-Combined Synopsis06/18/2026
Railcar Spanners, 80 Each, Aluminum, Required in support of the Army Power Projection Platform , Campbell Rail Operations Facility , Fort Campbell, KY Rail Spanner Specifications 1.QTY 80 each Rail Spanners a. Rail Spanners shall be capable of spanning between railcars, allowing the loading of self-propelled vehicles, towed trailers, and other rolling stock onto railcars. b. Rail Spanners shall be compatible with all military and commercial railcars. c. Axle Weight Capacity, A pair of Rail Spanners, left and right runways, shall be rated at 40,000 lbs. maximum single axle. Each individual Rail Spanner shall be rated at 20,000 lbs. maximum single/dually wheel, 24inch wide, no thicker than 4-inch tall. d. Rated Capacity: Shall be no more than 50% of failure strength at least a 2-to-1 safety factor. Failure strength is determined by the amount of weight that causes permanent deformation of the aluminum. An 80,000lb axle can be placed on a pair of Rail Spanners before any permanent deformation of the aluminum.e. Dimensional Data: 72 inches long x 24 inches wide f. Stub Toe: Each Rail Spanner will have a 2-inch-high Stub Toe or Bullnoseg. Kicker Plate Each Rail Spanner shall have the Improved Kicker Plate that utilizes aluminum tubes and 3inch tapered gussets, instead of angled aluminum. Kicker Plates made of angled aluminum will break and collapse over time, decreasing the lifespan. h. Each Rail Spanner shall have a Specifications Plate etched with the following 1 Manufacturer?s Part Number2 Vendor?s contact info email address and phone number3 Rated Capacity 4 Safety Statement: Must be supported at least 12in each end i. Rail Spanners will be fabricated by a welder certified by the American Welding Society. j. 72-inch_6 foot long by 24-inch _2 foot wide Rail Spanners shall not weigh more than 80 lbs. each.k. Material: Aluminum l.2 Person lift and placement
-Combined Synopsis06/12/2026

Additional Details

Solicitation Number

W911S226U3244

Archive Date

May 14, 2027

Office Address

FORT DRUM, NY, 13602-5220