GovChime
Notice ID: 146d17695e03490f94bea8845e331ba2Combined Synopsis/Solicitation

Hy-Rail Light Duty Truck

Responses closed . Full description on SAM.gov.

Overview

Response deadline
11:00 AM CDT
Posted
August 11, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
336510: Railroad Rolling Stock Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
Place of performance
Fort Polk, LA, 71459
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911S226U4030
Notice ID
146d17695e03490f94bea8845e331ba2

Description

Hy-Rail Light Duty Truck

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    Hy-Rail Light Duty Truck

    Notice 146d17695e03490f94bea8845e331ba2 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
LIGHT DUTY HY-RAIL TRUCK WITH HARSCO HY-RAIL LD1515 ATTACHMENT.
-Combined Synopsis11/16/2026
Minimum 72 inch long x 24 inch wide and no more than 4 inch thick. Minimum weight per single spanner 20,000lbs (40,000lbs per pair/axle) total weight minimum of each spanner is 78lbs EA. Rated capacity shall be no more than 50% of failure strength (at least a 2-to-1 safety factor). Failure strength is determined by the amount of weight that causes permanent deformation of the aluminum. Meaning that an 80,000 axle can be placed on a pair of spanners before any permanent deformation of aluminum appears. Minimum structure tubes 3 inch x3 inch and no more than 4 inch x4 inch. Top surface of spanner will be composed of maximum 2 inch wide high-traction rungs. The rungs shall be spaced no more than 4 inch to allow tiedown chains or straps to be routed between the rungs and over the structural tubes also spacing allows for debris to fall through. Must have reinforced kickplate on one side to rest on flat/ unobstructed surface. Minimum 12 inch heavy duty reinforced stub toe on each end: taper to 2 inch blunt end, knife end not acceptable, Each spanner must be etched with part number and capacity.
-Combined Synopsis08/14/2026
Item: Rail SpannersBrand Name: MilAirXPart Number: Salient Characteristics: MilAirX Rail Spanners are the strongest yet lightest railway/railcar spanners on the planet. Rated at 40,000lbs per pair/axle (20,000lbs each).These spanners have at least a two-to-one safety factor (meaning the point of failure is over80,000lbs per axle) 72 inches long, 24 inches wide, 4 inches thick. Engineered with a ?Stub Toe? (Bullnose) increases lifespan. (A knife point will eventually curl up over time due to use.) The MilAirX Rail Spanners has a beefy ?Kicker Plate? that will stand up to abuse.
-Combined Synopsis07/02/2026
Reason for amendment is to change the quantity from 100 to 45
-Combined Synopsis06/08/2026
The purpose of this Amendment is to change the NAICS FROM: 482111 TO: 336510 and update due date from 15 May 26 to 25 May 26.
-Combined Synopsis05/25/2026

Additional Details

Solicitation Number

W911S226U4030

Archive Date

Aug 11, 2027

Office Address

FORT DRUM, NY, 13602-5220