Notice ID: 9993eeae7142af5f9b24cfd05e427ff2Award NoticeAwarded
54--AWARD OF PORTABLE ARMORY UNITS
Awarded on August 25, 2008. Full description on SAM.gov.
Awarded tounder W911S708P0519 (source: SAM.gov award notice)• $140.1K
Overview
- Posted
- September 1, 2008
- Notice type
- Award Notice
- NAICS
- 332311: Prefabricated Metal Building and Component Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QM MICC-FT LEONARD WOOD
- Place of performance
- ACA, Maneuver Support Center and Fort Leonard Wood Directorate of Contracting, P.O. Box 140 Fort Leonard Wood MO 65473-0140 US
- PSC
- 54: PREFAB STRUCTURES/SCAFFOLDING
- Last updated
- Sep 25, 2026
- Award date
- Aug 25, 2008
- Award amount (SAM.gov award notice)
- $140.1K
Identifiers
- Solicitation number
- W911S708T0406
- Notice ID
- 9993eeae7142af5f9b24cfd05e427ff2
- Award number (PIID)
- W911S708P0519
Description
This acquisition is for 2 each Modular Weapons Storage Armories (30x10x10) for delivery to the Engineering Services Division, 1334 1st Street, Building 2200, Fort Leonard Wood, Missouri (Pulaski County) 65473. The delivery date is 5 months after contract award. This acquisition is a 100 percent small business set aside. NAICS code is 332311 with a size standard of 500 employees. Intrusion Detection Equipment will be procured separately. Contractor must be enrolled in the CCR program, before a contract can be issued. A copy solicitation, W911S7-08-T-0406, will be posted on the Army Single Face to Industry (ASFI) web site at: https://acquisition.army.mil/asfi/ on or about 22 July 2008. Point of contact is Mr. Raymond Gilbreath, (573) 596-0265, raymond.gilbreath@us.army.mil.
Award Overview
Award Number
W911S708P0519
Award Amount (SAM.gov award notice)
$140.1K
Award Date
Aug 25, 2008
Awardee
Original Solicitation
Notice ID: 9993eeae7142af5f9b24cfd05e427ff2
Posted Date: Sep 1, 2008
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Raymond Gilbreath, 573-596-0265 ACA, Maneuver Support Center and Fort Leonard Wood
Documents
No documents available.
Lifecycle
Solicitation:
W911S708T0406- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- Pre-SolicitationJul 8, 2008
54--Modular Weapons Storage Armories
- SolicitationJul 23, 2008
54--Modular Weapons Storage Armories
- AwardedCurrentSep 1, 2008
54--AWARD OF PORTABLE ARMORY UNITS
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The solicitation is amended to provide revisions to the Purchase Description, CLIN Structure, provide a Projnet Plan Room key to access the Bathymetry survey information and extend the quote due date. Also, Contractor Questions Answered Part 2 are posted. Contractor Questions/Government Answers are posted. The purpose of the debris boom is to prevent floating debris from impacting the dam's tainter gates, which is crucial for maintaining the full operational capacity of the spillway. The boom will also serve as a visual barrier to boaters. The Contractor shall provide all labor, materials, equipment, engineering, fabrication, delivery, and optional installation necessary to furnish a complete debris boom system at Harry S. Truman Dam. The approximately 2,000-foot boom shall be designed to intercept floating debris upstream of the spillway and withstand site-specific hydraulic, wind, wave, debris, and impact loading conditions. The debris boom shall be designed for an 800-foot-long by 3-foot-thick debris field, use a minimum safety factor of 2.0 for design loads, withstand a direct head-on impact from an 18-inch-diameter, 100-foot-long log traveling at the maximum design water velocity, and withstand design conditions including 50 mph wind speed and 5-foot wave height. This acquisition is not set-aside for small business concerns and is competed as full and open competition, Unrestricted. An organized site visit has been scheduled for: Friday, 9 October 2026 at 11am. | - | Combined Synopsis | 11/02/2026 |
Prefabricated steel sheds with Installation Labor Solicitation | - | Combined Synopsis | 11/16/2026 |
**W912EE** Amendment Three- The purpose of this amendment is to include pictures that were requested and to include ProjNet Questions and answers. There is no change to the Scope of Work or the Request for Quote due date. Amendment Two- The purpose of this amendment is to update the Scope of Work to include color of metal building. Scope of work says "paint of industrial enamel on color 'tan' with 'brown' trin & gutters. Please see attached Scope of Work. Amendment One - The purpose of this amendment is to update the Scope of Work details and change the set aside type to unrestricted. The request for quotes date is changed to November 6, 2026, at 3PM Central Time. Please see updated Scope of Work and Amendment. Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation This is a solicitation for commercial items prepared in accordance with the format in RFO Part 12, as supplemented with additional information included in this notice. Solicitation Number W912EE27QA002 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This solicitation is being issued under 100% small business set aside. The NAICS code for this procurement is 332311, Prefabricated Metal Building and Component Manufacturing, with a size standard of 750 employees. This procurement is being conducted in accordance with regulations at RFO Part 12 - Acquisition of Commercial Products and Commercial Services. The U.S. Army Corps of Engineers, Arkabutla lake Project, has a requirement to procure one metal building to cover and protect the new well. Arkabutla Lake Project has previously had a new well installed and now requires the old well to be abandoned and the surrounding small 30 x 50 building to be rehabbed to continue to protect the new well. The USACE personnel will perform prep work prior to deliver and install by removing the old building where replacement pre-fabricated building will be delivered and installed. Please see below for details. General Specification: Abandon old well Install new plumbing includes valves to meet AWWA C-509 specs, flange fitting to meet AWWA specs, watts 2” pressure reducer, 2” flange master meter, Stenner model 45MHP10 chemical pump, 3 phase air compressor, accessories and fittings to connect and create a working system Purchase, deliver, & install one (1) 30’x50’ pre-fabricated metal Red Iron open span building with 12’ tall eaves, 26-gauge roof & walls, one (1) roll up door, one (1) 3’x7’ walk through door, insulation, and gutters. Building will include engineer’s stamped drawings for the building and a set of anchor bolt plans. Sand blast and paint tank with one (1) coat Tnemec-Zinc 3-5ml inside and out. Second coat inside Tnemec series 21 6-9ml. Third coat inside Tnemec series 216-9ml. Second coat outside L140 epoxy 6-9ml. Third coat outside 1094 urethane 5-7ml. Install new electrical including 200-amp enclosed circuit breaker outside (2020 NEC requirement), 200-amp main breaker panel inside, pump control panel with motor starter to control well, disconnect at well, six (6) 8” long LED strip lights, two (2) 55 watt outside lights with photocell, ten (10) 120V outlets including an outside GFCI, 3 phase circuit for air compressor, and reconnect existing pressure controls on tank The contractor shall provide all supervision, labor, tools, equipment, and tools necessary for purchase and installation no later than 120 days after award. Additional information about the specifications for this equipment is listed in the scope of work. All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined unsuccessful and removed from further consideration. Offers are encouraged to review all clauses that are incorporated into this solicitation. ****SPECIAL ATTENTION SHOULD BE FOCUSED ON RFO 52.212-2 EVALUATION – COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION FACTORS AND BASIS FOR AWARD FOR THIS REQUIREMENT. **** The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the Government. Offerors are encouraged to provide their best proposed pricing in their initial offer. Notes to Offerors: A BIDDING SCHEDULE MUST BE SENT IN WITH YOUR QUOTE. Quotes shall be submitted electronically via email, to: afton.riles@usace.army.mil. For questions and technical inquiries please see instructions below. You are responsible for reading all information contained in this solicitation and all attachments if any posted with it. Offerors should check the SAM.gov web site often for modifications to this solicitation. Offerors are responsible for ensuring their quotes arrive timely. TECHNICAL INQUIRIES AND QUESTIONS Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at (https://www.projnet.org). Offerors are encouraged to submit questions early in the advertisement process, in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Any questions submitted within the 72 hours window of the solicitation closing date are not guaranteed a response will be provided. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. The Solicitation Number is: W912EE27QA002, Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation The Bidder/Offeror Inquiry Key is: MX684V-PQ8W9T Specific Instructions for ProjNet Bid Inquiry Access: From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. Identify the Agency. This should be marked as USACE. Key. Enter the Bidder Inquiry Key listed above. Email. Enter the email address you would like to use for communication. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Bidders/Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP. | - | Combined Synopsis | 11/06/2026 |
THIS IS A SOURCES SOUGHT NOTICE ISSUED FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION, REQUEST FOR QUOTATION (RFQ), OR REQUEST FOR PROPOSAL (RFP). The Government is conducting market research to identify qualified sources capable of providing support in Veracruz, Panama. The purpose of this notice is to identify capable sources, assess industry capability and availability, and obtain industry feedback regarding the anticipated requirement. This notice is issued solely for market research purposes and to provide industry with advance notice of a potential upcoming solicitation. A solicitation has not been issued at this time. Description: Requesting a rough order of magnitude (ROM) for estimated pricing, and capability plan, to support the purchasing and transport of materials / supplies at Veracruz, Panama to construct a 11M x 15M x 5.5M pre-engineered building with roof panels. The materials / supplies are to be delivered on site to an elementary school in Escuela Cosecha Amistad, Veracruz, Panama by March 2027. Need the interior of the canopy to be clear space so the kids can play soccer / basketball. Request for Deliverables: Vendors submit a Technical Capability Statement illustrating their ability to purchase and deliver pre-fabricated building supplies across Panama Provide a general Rough Order of Magnitude (ROM) outlining estimated costs for the purchase and delivery of the pre-fabricated building supplies at .Escuela Cosecha Amistad, Veracruz, Panama. If you can support this request, please submit the deliverables mentioned above by 09 Novembet 2026 by 12:00PM CST. Please email information to MAJ Vernon Shank at vernon.d.shank.mil@army.mil. Thank you for the support. | - | Market Research | 11/09/2026 |
***29 OCT 2026 - AMD 0004 issued*** ***20 OCT 2026 - AMD 0003 issued*** ***13 OCT 2026 - AMD 0002 issued*** ***10 SEP 2026 - AMD 0001 issued*** The Army Contracting Command - Detroit Arsenal (ACC-DTA) is issuing this Request for Proposal (RFP) to establish a new five-year, Firm-Fixed-Price (FFP), Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the manufacture and delivery of four (4) variants of the S-280C/G Vehicle Mounted Shelter. This is a non-commercial requirement. Requirement: The S-280C/G is a lightweight, tactical military shelter designed to house and protect sensitive electronic equipment and personnel. Manufacturing shall be in strict accordance with the Government-owned Technical Data Package (TDP) and ASTM E1975-22. The scope includes First Article Testing (FAT), production, and delivery of all associated technical and logistics data. National Stock Numbers (NSNs): 5411-01-304-3069 (Shielded) and 5411-01-092-0892 (Unshielded). Set-Aside: This is a 100% Small Business Set-Aside. The applicable size standard for NAICS 332311 is 750 employees. Award Basis: The Government intends to award a single IDIQ contract to the responsible offeror whose proposal represents the best value to the Government. This will be a tradeoff source selection conducted in accordance with FAR Part 15. Contract Value: The minimum guaranteed value for this contract is $100,000.00. The maximum estimated contract ceiling is $4,000,000.00. Technical Data Package (TDP): The TDP for this solicitation is Export-Controlled (Distribution Statement C). To gain access, interested parties must have a current and valid DD Form 2345, "Militarily Critical Technical Data Agreement" certification on file with the U.S./Canada Joint Certification Office (JCO). The TDP can be accessed through the attachments section of this announcement on SAM.gov by certified offerors. Questions: All questions regarding this solicitation must be submitted in writing to the points of contact listed below no later than September 24, 2026 at 11:59 PM Eastern Time. Telephone inquiries will not be accepted. Points of Contact: Nicholas A. Lang, Contract Specialist, nicholas.a.lang.civ@army.mil Daniel J. Gibson, Contracting Officer, daniel.j.gibson43.civ@army.mil Disclaimer: Offerors are responsible for monitoring SAM.gov for any amendments to this solicitation. | - | Solicitation | 11/13/2026 |
Additional Details
Solicitation Number
W911S708T0406
Archive Date
Oct 1, 2008
Office Address
FORT LEONARD WOOD, MO, 65473-0140