GovChime
Notice ID: 083469c9e2347ff153be703a03a0fb36Sources Sought

93--SIP-Hut

Archived on April 30, 2013. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
6:00 AM UTC+01:00
Posted
March 1, 2013
Notice type
Sources Sought
NAICS
321992: Prefabricated Wood Building Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QM MICC-WEST POINT
Place of performance
MICC - West Point Directorate of Contracting, ATTN: SFCA-NR-WP, 681 Hardee Place West Point NY 10996-1514 US
PSC
93: NONMETALLIC FABRICATED MATERIALS
Last updated
Dec 5, 2025

Identifiers

Solicitation number
W911SD13T0122
Notice ID
083469c9e2347ff153be703a03a0fb36

Description

SIP-Hut Building Foundation The building will have outside dimensions of 16-ft. x 32-ft. and will be built on a series of piers approximately 8-in. in diameter placed on an 8-ft. x 8-ft. grid. The SIP solution must be able to rest on the pier system with no additional foundation support members provided by the purchaser. The purchaser will provide the piers and all necessary tie-down hardware to resist lateral loads. Building Envelope The building will appear as in Figure 1 with the outside dimensions being 16-ft. x 32-ft. The plate height on the eaves will be 8 ft. from the surface of the floor The door opening on each end of the building will be centered and accommodate a 36-in. x 80-in. door. The entire building envelope (floor, walls, roof) will be constructed with Structural Insulated Panels (SIPs). The roof, walls and floor must have insulation ratings of R-40, R-26, and R-30, respectively. It is desirable to keep panel thickness to a minimum. The SIPs will be constructed with an Exposure 1 OSB that meets product standard PS 2-92. The individual panels cannot weigh more than 200 lbs. nor be greater than 8-ft. in one of its two dimensions to allow placement in a standard military shipping container (CONEX). The roof pitch will be 4:12 on the gable end. The minimum overhang for gables and eaves will be 1 ft. Constructability The SIP system must be designed for ease of assembly by soldiers having little familiarity with the system or design. Easy assembly is characterized by wall and roof panel connections that align easily and require relatively few actions on the part of the assembler. An example of such a connection is a cam-lock system which is engaged by turning a bolt using a T-wrench. The SIP solution provided must include all required splines, foam sealant with dispensing guns, panel screws, and shop drawings. The SIP system must be easily disassembled to enable repackaging and movement to another location. The SIP provider must provide on-site assembly assistance with the building package.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Richard Williams, 845-938-0821 MICC - West Point

Documents

No documents available.

Lifecycle

Solicitation:W911SD13T0122
  1. Market Research

Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)

  1. Market ResearchCurrentMar 1, 2013

    93--SIP-Hut

    Notice 083469c9e2347ff153be703a03a0fb36 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

W911SD13T0122

Archive Date

Apr 30, 2013