GovChime
Notice ID: 09be272801fa4e2a8d50d91f3f3726b7Combined Synopsis/Solicitation

Surveying and Mapping Equipment

Archived on February 24, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−05:00
Posted
February 4, 2023
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
541370: Surveying and Mapping (except Geophysical) Services
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QM MICC-WEST POINT
Place of performance
West Point, NY, 10996
Last updated
Dec 4, 2025

Identifiers

Solicitation number
W911SD23R0065
Notice ID
09be272801fa4e2a8d50d91f3f3726b7

Description

The United States Military Academy at West Point, NY has a requirement for Surveying and Mapping Equipment (see attached Specifications & Requirements for complete info) (Solicitation# W911SD23R0062). All details regarding the requirement are clearly listed on the attached specifications. This requirement is strictly for BRAND NEW ITEMS, not refurbished nor resales (no exceptions). Therefore, All bidders must meet and comply with the requirements stated above, the notice below, the specifications, and the attached Solicitation (SF1449). Failure to meet the requirements or not comply with what is specifically requested will be considered as Non-Responsive . All bidders must complete and sign / date the Solicitation (SF1449) with all quoted offers. We will not be able to accept a quote unless we receive a signed / dated SF1449 to go with the quote. All bidders must submit the following documents with their bids: 1. SF1449 (filled in, completed, and signed as specifically instructed below) 2. Company Quote (must be FOB Destination; see Note 3 below) 2 attachments of the SF1449 are included for your use (PDF & WORD). In case if one doesnt work, use the other. You only need to complete ONE as follows PAGE 1: Block 24 (Combined Overall Total for the entire Contract) PAGE 1: Block 30a, b, & c (must be *SIGNED/DATED [not typed]; can't accept w/o signature) *NOTE: Legal signature w/Digital Card is acceptable. PAGE 3 thru 7: The Unit Prices -and- Overall Totals (for all 10 items). PAGE 10: *Clause# 52.204-8 (fill in applicable slot) *NOTE: DO NOT FILL ANYTHING ELSE if you checked Paragraph d Applies (scroll down on Page 11). If you checked that block, the Solicitation / RFQ is considered "complete" (it means your company is registered in SAM.gov). *The NAICS Code Qualifier is 541370; Business Size is $16.5 mil. *Vendors that use NAICS Codes in the 42, 44, and 45 series are not authorized for this requirement. NOTE 1: All vendors must read, review, and comply with all the requirements stated above, below, and in the attached Solicitation (SF1449). NOTE 2: You may submit your own company quote. However, it has to be with a signed/dated SF1449 (no exceptions). NOTE 3: This solicitation is Firm Fixed Price only. Therefore, all quoted offers must be FOB DESTINATION. All shipping costs must be INCLUDED into Line Item 0001. Any offer with FOB ORIGIN will not be accepted. NOTE 4: Promotional / Discount Pricing will only be accepted if the offer is available for a minimum of at least 10 business days from the date the solicitation closes (not from the date you submit your quote). Any offers below the 10-day minimum requirement will have to be offered as Non-Promotional / Non-Discount price only. NOTE 5: This solicitation is issued in electronic format only at https://sam.gov/content/home. All vendors must go through that site for documents and info on the requirement. SAM.gov is a free [no-fee] federal government website. NOTE 6: Quotes will only be accepted if they are completed and processed as stated in NOTE 1, 2, 3, 4, 5, and 6. Please make sure to provide the following data on your quote - or - on your email reply: 1. Company Name and Address 2. SAMs Unique Entity Identifier (UEI#) 3. CAGE Code 4. TAX ID# (aka EIN or TIN ) 5. Company NAICS Code and Business Size (see NAICS Qualifier above). 6. Small Business Certifications (if applicable) (i.e. - 8a, WOSB, EDWOSB, HUBZone, SDVOSB, etc.) 7. Company POC, Email, Phone#. All parties that qualify for this solicitation must send their replies / documents via email to jorge.l.acevedo4.civ@army.mil. All final responses, quotes, specs, and attachments must be sent to jorge.l.acevedo4.civ@army.mil by no later than February 9, 2023 (Thursday) @ 12:00 PM (EST).

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W911SD23R0065
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentFeb 2, 2023

    Surveying and Mapping Equipment

    Notice 09be272801fa4e2a8d50d91f3f3726b7 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This Notice of Intent is provided to formally advise Contracting Division of the U.S. Army Corps of Engineers’ (USACE), New York District intent to provide additional contract capacity under the above – referenced Indefinite Delivery/Indefinite Quantity (IDIQ) contract. The current period of performance for Contract No. W912DS25D0003 is June 23, 2025 - June 23, 2030. This Notice is being published in accordance with Federal Acquisition Regulation (FAR) requiring dissemination of information on proposed contract actions. This is a notice of intent to provide additional contract capacity under the above – referenced Indefinite Delivery/Indefinite Quantity (IDIQ) contract and modify Contract No. W912DS25D0003 with additional capacity. Subject to the execution of all required contractual modifications, approvals, and applicable procurement requirements, the anticipated additional contract capacity is: Additional Contract Capacity: $2,500,000 Anticipated Contract Period: Five (5) Years Contract Type: Indefinite Delivery/Indefinite Quantity (IDIQ) The additional capacity is intended to support the continued and/or expanded requirement for services and deliverables within the scope of the existing contract. Individual task orders, delivery orders, or other contractual actions issued against the additional capacity will remain subject to the terms and conditions of the contract, applicable funding availability, and the issuance of authorized contractual instruments. The parties shall continue to comply with all applicable contract terms, Federal Acquisition Regulations (FAR), agency regulations, policies, and other applicable statutory and regulatory requirements. Upon completion of the necessary review and approvals, Contracting Division of USACE, New York District anticipates processing the appropriate contract modification and/or other contractual documentation necessary to necessary to establish the additional capacity.
-Special Notice11/06/2026
This is an A-E Synopsis in accordance with FAR 36.102. The Mission and Installation Contracting Command - Fort Drum is procuring Architect-Engineer (A-E) Design Services for the Modernized Pre-Mix and Nitrocellulose (NC) Dehydration Facilities at Radford Army Ammunition Plant (RFAAP). This procurement is conducted under the Brooks Architect-Engineer Act (40 U.S.C Section 1102) and Far subpart 36.102, which require that A-E contracts be negotiated on the basis of demonstrated competence and qualifications for the required professional services. The objective of this project is to prepare a 30% design for Nitro Cellulose (NC) Dehydration (including NC Shredding), hereinafter referred as NC Dehy, and Pre-Mix facilities at Radford Army Ammunition Plant (RFAAP) using the most modern, safe, environmentally friendly, and automated technologies to the maximum extent feasible.
-AwardedOpen
The Mission and Installation Contracting Command - Fort Drum is procuring Architect-Engineer (A-E) Design Services for the Acid Farm storage tanks at the Radford Army Ammunition Plant (RFAAP). This procurement is conducted under the Brooks Architect-Engineer Act (40 U.S.C Section 1102) and Far subpart 36.102, which require that A-E contracts be negotiated on the basis of demonstrated competence and qualifications for the required professional services. The selected A-E firm will provide design services for a modernized Acid Tank Farm capable of supporting capacity requirements of the modernized Nitric Acid Concentrator/Sulfuric Acid Concentrator (NAC/SAC), Modernized Nitrocellulose (MNC) production facility, and the Legacy Nitroglycerin Production Facility (NG-2) at (RFAAP).
-AwardedOpen
The Mission and Installation Contracting Command and Fort Drum is procuring Architect and Engineer (A E) Design Services for Fire Protection at 10120 and 10130, Fort Drum NY. This procurement is conducted under the Brooks Architect and Engineer Act (40 U.S.C. 1102) and FAR Subpart 36.102, which require that A E contracts be negotiated on the basis of demonstrated competence and qualifications for the required professional services. The selected A-E firm will provide design services of the Fire Protection features required for the renovation of two Battalion Headquarters, 10120 and 10130 on Fort Drum NY.
-AwardedOpen
This posting is a Request for Quote (RFQ) made by the U.S. Army Corps of Engineers, Buffalo District for the performance of a hazardous materials survey for the 2,140 square foot Toledo Project Office (Building 1), the 1,200 square foot Warehouse (Building 2), and the 2 small sheds (Buildings 4 and 5) in Toledo Ohio. The North American Industrial Classification System Code (NAICS) for this effort is 541380 - Testing Laboratories and Services. This will be a 100% Small Business Set-Aside competitive procurement. Please be advised that this requirement may be delayed, revised, or cancelled at any time before award. SOLICITATION WEBSITE: The official solicitation and any subsequent amendments or updates, when posted, will be available free of charge by electronic posting only and may be found at Procurement Integrated Enterprise Environment (PIEE), https://piee.eb.mil/. Paper copies of the solicitation will not be issued. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil/. Solicitation Amendments, if/when issued, will be posted to the above referenced website for electronic downloading. This will be the only method of distributing the solicitation and any amendments by the Government prior to closing. It is the Offerors responsibility to monitor the website for any amendments or changes to the solicitation. REGISTRATIONS: Offerors shall have and shall maintain an active registration in the following database: System for Award Management (SAM): Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.gov to be eligible for a Government contract award. If the Offeror is a Joint Venture (JV), the JV entity shall have valid SAM registration in the SAM database representing the JV as one business/firm/entity. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror. INQUIRIES: Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at http://www.ProjNet.org/ProjNet. As noted, offerors shall NOT submit their proposals via ProjNet. Offerors shall submit their proposals in accordance with the provisions stated in the solicitation. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. The Solicitation Number is: W912P426QA014 The Bidder Inquiry Key is: 23ZI7B-J3HT5Z. Detailed instructions on accessing ProjNet can be found in Section L on page 68 of the attached solicitation.
-Solicitation08/12/2026

Additional Details

Solicitation Number

W911SD23R0065

Archive Date

Feb 24, 2023

Office Address

WEST POINT, NY, 10996-1514