Steel and Aluminum Bronze miter gate parts for Pittsburgh District, USACE
Archived on April 10, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM EDT
- Posted
- March 10, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 332710: Machine Shops
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION GREAT LAKES AND OHIO.ENDIST PITTSBURGH.W072 ENDIST PITTSBURGH
- Place of performance
- Pittsburgh, Pennsylvania
- Last updated
- Nov 2, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911WN26QA020
- Notice ID
- 1256ed977e4f46eab438b391017d43e7
Description
Amendment 0001 Posted.
Combined Synopsis/Solicitation for Commercial Products
Solicitation Number: W911WN26QA020
Federal Acquisition Circular (FAC) Date: 2025-06
Product/Service Codes: 9520
NAICS Code: 332710
Business Size Standard: 500 employees
Set-Aside: 100% Small Business
Government Organization: U.S. Army Corps of Engineers, Pittsburgh District
Description:
The U.S. Army Corps of Engineers, Pittsburgh District, is seeking quotes for a variety of stock parts in support of the Locks and Dams section. This is a Request for Quote (RFQ).
Submission Requirements:
- Registration in the System for Award Management (SAM) is required: https://www.sam.gov/SAM/
- Pricing should be submitted on the SF 1449 pages 2-3, or on contractor’s company standard form. Quote packages shall include pricing per CLIN, certificates of compliance, material test reports, and non-destructive testing reports. Welding procedures and other required procedures must be submitted to the contracting officer before fabrication is commenced.
- Submitted prices will remain good for 30 days
Required Delivery/Performance:
- Delivery: Required before 1 September 2026
- Delivery Locations: 3500 Grand Ave, Pittsburgh, PA
Important Notes:
- The Government reserves the right to cancel this combined synopsis/solicitation at any time.
- Award will be made to the quoters providing the best value to the Government.
- The Contractor is responsible for furnishing all equipment, labor, operators, supervision, quality control, supplies, materials, and incidentals necessary to satisfactorily perform all services.
Point of Contact:
Andrew Barlament at andrew.s.barlament@usace.army.mil
Miriaha Sigmon at miriaha.d.sigmon@usace.army.mil
Additional Resources:
- Procurement Technical Assistance Center (PTAC): http://www.aptac-us.org/contracting-assistance/
- System for Award Management (SAM): https://www.sam.gov/SAM/
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (6)
- Download
Amendment W911WN26QA020 0001.pdf
3.9 MBAdded in Combined Synopsis/Solicitation version 6Posted - Download
Questions and answers.pdf
40 KBAdded in Combined Synopsis/Solicitation version 6Posted - Download
W911WN26QA020.pdf
3.2 MBAdded in Combined Synopsis/Solicitation version 4Posted - Download
Drawings.pdf
5.2 MBAdded in Sources Sought version 3Posted - Download
Drawings.pdf
5.2 MBAdded in Combined Synopsis/Solicitation version 4Posted - Download
Specifications draft.pdf
395 KBAdded in Sources Sought version 3Posted
Lifecycle
- 3Version 3Sources SoughtArchived
Steel and Aluminum Bronze miter gate parts for Pittsburgh District, USACE
- 4Version 4Combined Synopsis/SolicitationArchived
Type changed from Sources Sought to Combined Synopsis/Solicitation
Steel and Aluminum Bronze miter gate parts for Pittsburgh District, USACE
- 6Version 6Combined Synopsis/SolicitationArchivedCurrent
Steel and Aluminum Bronze miter gate parts for Pittsburgh District, USACE
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The US Army Corps of Engineers (USACE), Rock Island District, Illinois Waterway Project Office (IWPO) has the requirement for the supply and fabrication of steel to support the Peoria and LaGrange wicket dam?s rejuvenation and modernization effort. This effort is critical to continue to provide the agriculture breadbasket to the world and is a critical investment with national and global interests.USACE will utilize the components and provide the necessary coatings such as paint to finish assembling a backlog of wicket gates. USACE will not supply any steel, personnel, equipment, or components to complete the supply requirement unless otherwise stated herein.8-11-2026 - AMEND 0001 Posted - Amendment and PD are combined - changes are highlighted | 53% | Combined Synopsis | 08/19/2026 |
This solicitation provides for the purchase of materials outlined below. Material must be delivered within 8 weeks of the award date. | 52% | Solicitation | 11/16/2026 |
This solicitation provides for the purchase of materials outlined below in the attached Scope of Work. | 45% | Solicitation | 11/16/2026 |
THIS IS A PRE-SOLICITATION NOTICE. THIS IS NOT THE REQUEST FOR PROPOSAL, NOR INFORMATION FOR BID. The U.S. Army Corps of Engineers (USACE) Detroit District intends to solicit for the New Lock Stoplogs to provide fabrication services to the Soo Project Office (SPO) in Sault Ste. Marie, Michigan. The project involves the fabrication and delivery of two complete sets of stoplogs (16 total). The fabricator shall be certified under AISC 207-23 as an Advanced Bridge Fabricator, Intermediate Bridge Fabricator, or Advanced Hydraulic Fabricator. The fabricator shall also have a Fracture Control Endorsement (FCE). Each full set of stoplogs includes 7 standard (non-filling) stoplogs and 1 filling stoplog (incl. 2 butterfly valve assemblies). Stoplogs shall be delivered by barge or ship to the Soo Locks in Sault Ste. Marie, Michigan. The Government will off-load stoplogs from barges. Ships shall off-load stoplogs to a designated area accessible to the ship. The North American Industrial Classification System (NAICS) code is 332312 – Fabricated Structural Metal Manufacturing, which has a small business size standard of 500 employees. The Product Service Code (PSC) is 9520 – Structural Shapes. The Solicitation will be issued as a 100% total small business set-aside. The Government intends to issue a firm-fixed price contract. Anticipated Solicitation Posting Date: November 2026. Anticipated Bid Due Date: December 2026. The solicitation package materials, documents, drawings, specifications, and attachments to the anticipated solicitation will be available only electronically and via the PIEE Solicitation Module and/or SAM.gov which is free of charge. Hard copy documents will NOT be supplied by the Government to any interested parties as a result of this pre-solicitation notice or the upcoming solicitation. Please note the Government will not be maintaining a bidders list during the solicitation period. However, vendors are strongly encouraged to review the "Interested Vendors List" found on sam.gov for this requirement. In order for interested contractors to conduct business with the Federal Government, contractors must be registered in the System for Award Management (SAM) prior to any award. Contractors can access SAM free of charge at www.sam.gov. | 45% | Pre-Solicitation | 11/04/2026 |
Portable Tactical Trap with Wheels | 45% | Combined Synopsis | 02/12/2026 |
Additional Details
Solicitation Number
W911WN26QA020
Archive Date
Apr 10, 2026
Office Address
PITTSBURGH, PA, 15222-4198