GovChime
Notice ID: 7d09e22b05a04ea083b1fad5d39865f6Solicitation

Fixed Wing Flight Training Services

Archived on April 21, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−04:00
Posted
March 11, 2022
Notice type
Solicitation
NAICS
611512: Flight Training
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QM MICC-FDO FT EUSTIS
Place of performance
Fort Rucker, 36362
Last updated
Sep 25, 2026

Identifiers

Solicitation number
W9124G22R0002
Notice ID
7d09e22b05a04ea083b1fad5d39865f6

Description

This is a solicitation for Fixed Wing Flight Training services to support Fort Rucker, AL. Mission and Installation Command (MICC) – Fort Eustis contracting office anticipates awarding a single Firm Fixed Price contract with a 12 month phase-in period, one (1) 12-month base period and seven (7) 12-month option periods. All work is to be performed in accordance with the Performance Work Statement. The designated North American Industrial Classification System (NAICS) code for this acquisition is 611512 (Flight Training) and the small business size standard is $30 million. No paper copies of the solicitation will be issued. All documents including the solicitation, W9124G22R0002, and all amendments to the solicitation will be obtainable via the sam.gov website. Contractors are strongly cautioned to check the website periodically for amendments. All questions must be submitted by 10:00AM EST on 24 February 2022. All questions must be submitted in writing via email to Ms. Mai-Ly Pham, Contract Specialist, at anna.m.pham2.civ@army.mil, Mr. Klinton West, at klinton.c.west.civ@army.mil and Ms. Drena J. McIntosh, Contracting Officer, at drena.j.mcintosh.civ@army.mil. This notice does not obligate the Government to award a contract nor does it obligate the Government to pay for any proposal preparation costs. The solicitation will close on 21 March 2022 at 10:00AM EST. ----------------------------------------------------------- March 11, 2022: *The purpose of Amendment 0001 is provide responses to Industry questions and make related revisions to the solicitation.*

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:W9124G22R0002
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Special NoticeDec 21, 2021

    Fixed Wing Flight Training Services

    Notice 45303f83597f49478dc7122a9091095f on SAM.gov

  2. Pre-SolicitationJan 3, 2022

    Fixed Wing Flight Training Services

    Notice 3fcd8a9e1c93455b9d1c1ed297289a9a on SAM.gov

  3. 2×
    SolicitationCurrentFeb 17, 2022

    Fixed Wing Flight Training Services

    Notice 7d09e22b05a04ea083b1fad5d39865f6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Solicitation Identifier N0042127Q1017is issued as a synopsis/solicitation. The Government intends to purchase on a firm fixed-price basis and to solicit the proposed purchase order on a Sole Source for Army Aviation Heritage Foundation and Flying Museum, Inc. under the authority of FAR Part 12. Offerors must be registered in the System for Award Management (SAM) database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at SAM.gov | Home. Your quote must contain enough technical information to evaluate your quote. Please include your published price list, historical, authorized distributor letter, Cage Code, include POC email, lead time and grand total amount. Quote all or none. The Government intends to award this on a brand name basis. All interested parties MUST submit a brand name quote no later than 4:00 pm on 09 Nov 2026. If you are quoting, you MUST be an authorized distributor. Only quotes accompanied by a copy of an authorized reseller certificate will be evaluated. Award will be made on an all or none basis. All quotes/responses shall be submitted via email to benjamin.r.flores3.civ@us.navy.mil.
72%
Combined Synopsis11/09/2026
Amendment 01 Description provided at bottom of announcement. Amendment 02 Points of Contact updated. INTRODUCTION The Army Contracting Command (ACC) Orlando is issuing this sources sought notice and holding an industry day as a means of conducting market research to identify parties having in the capability and the resources to support the requirement to provide agile, specialized and cost effective Security Assistance Teams (SATs) in order to facilitate security assistance programs that build partnership capacity as well as defense and security relationships; that promote specific U.S. security interests, including all security assistance activities; develop allied and friendly military capabilities for self-defense and multinational operations; and provide U.S. forces with peacetime and contingency access to host nations in support of United States Army Campaign Plan and U.S. national security objectives. The intention is to award a new Multiple Award Task Order Contract (MATOC) Indefinite Delivery Indefinite Quantity (IDIQ) contract. PLACE OF PERFORMANCE Minimal Continental United States (CONUS) performance (Program Management) and Phase-In Period will occur. Predominantly performance will be Outside the Continental United States (OCONUS). *NOTE 01: The OCONUS portion required will have contractor performance under potentially austere, physically demanding, and stressful working conditions. PROGRAM BACKGROUND U.S. Army Security Assistance Training Management (SATMO) is a subordinate command under the U. S. Army Security Assistance Command (USASAC), a Major Subordinate Command (MSC) of Army Material Command (AMC). SATMO executes the overseas portion of the U.S. Army’s Security Assistance Enterprise Outside Continental United States (OCONUS) training and technical assistance mission. SATMO plans, forms, prepares, deploys, sustains and re-deploys Continental United States (CONUS)-based (from the continental U.S.) SATs to execute OCONUS Security Cooperation missions in support of Geographic Combatant Command Theater Security Cooperation Programs and U.S. foreign policy (For the purposes herein, the terms “Security Assistance” and “Security Cooperation” mean “Foreign Military Aid.”). SATMO staff teams with active component Army, active component members of other services, reserve component Army, reserve component members of other services and DoD civilians. SATMO may use contractor services if none of these are available for a given Aviation SAT mission to support rotary wing aircraft. Because of long lead-times for non-contract personnel, and current operations tempo, SATMO anticipates an increasing requirement for contractor support, especially for Aviation skills including flying, maintenance and operational planning. Additional requirements will include the same aviation skills as previously listed but for Non-Standard Aircraft. In this case non-standard aircraft are all types not currently employed by the active component, this includes legacy air frames. In accordance with the Assistant Secretary of the Army for (Acquisition, Logistics, and Technology) (ASA (ALT)) memorandum dated 6 January 2010, all Non-Standard Aircraft training not procured through the United States Army Aviation and Missile Command (AMCOM) Acquisition Center shall be referred to the Deputy Assistant Secretary of the Army (Procurement) (DASA (P)), the Deputy Assistant Secretary of the Army (Acquisition Policy and Logistics) (DASA (APL)), and the Deputy Assistant Secretary of the Army (Defense Exports and Cooperation) (DASA (DEC)) for review and evaluation and ASA (ALT) for approval prior to any commitment and execution by any other acquisition office. Specific skill requirements will be identified at the Task Order (TO) level. When it is known that uniformed personnel will not be available, contractor support will become the first option considered. In other cases, the more rapid reaction time of contractors may be a governing factor in using contractor teams. Aviation SATs deployed because of this contract may be a single Contractor employee, a combination of Department of Defense personnel and Contractor employee(s), or entirely Contractor employees. Aviation services will be provided during the Aviation SAT execution phase and during the post deployment stage of an Aviation SAT mission cycle. The aviation services required are divided into two (2) categories: rotary wing training related services and rotary wing technical assistance related services. The example subtasks and explanations listed below are representative of Aviation SAT rotary wing missions that SATMO may accomplish during a TO. Potential technical assistance related mission sets are Fast Rope Insertion and Extraction System (FRIES), Special Patrol Insertion and extraction system (SPIES), Hoist, External Loads, Over water, Helicopter Arial Refuel (HAR), High Altitude Aviation Training Site (HAATS), Aerial Gunnery, Aviation Special Operations, and Air Assault/Air Movement. Provide any supporting documentation reflecting the experience. Potential qualified trainers and advisors of USAACE rotary wing pilots (SP/IP, ME/MTP, AMSO, ASO), 15 series Military Occupational Specialty codes (MOS), MOS maintainers (15B,15D,15F,15G, 15H, 15N,15R, 15Y), and 15 MOS crew members (15T, 15U) with additional qualifications of standardization instructor (SI)/ flight instructor (FI), and flight engineer (FE) and personnel capable of establishing base operations training capabilities. SPECIFIC TASKS Tasks listed herein are only examples and are not to be performed unless issued on a Task Order. These are intended to provide a sampling of the types of missions (and inherent requirements) which could reasonably be expected to be resourced and executed by the contractor. The list is by no means exhaustive, either in the nature or the scope of possible missions. Training Related Services. SATMO provides Aviation training, maintenance training, and advisory services to customer-Host Nations in several different major areas. Conduct aviation assessments to: Determine aviation training requirements. Identify aviation areas requiring technical assistance (maintenance, logistics, standardization, etc.). Host Aviation Engineering Directorate (AED) sourced airworthiness assessment teams. Evaluate aviation safety processes and programs. Conduct formal academic and flight training: Initial rotary wing qualification courses to train crewmembers in the basic skills required to operate an aircraft under day, night, and instrument condition. Aircraft qualification courses to train crewmembers to operate a specific aircraft. Aircraft series transition courses to train crewmembers that are already qualified on a specific aircraft to operate a new or different version. Training on advanced aviation skills such as night vision systems, aerial gunnery, formation flight, etc. Crew Chief, Flight Engineer, and crew communications courses. Graduate-level aviator Instructor Pilot and Maintenance Test Pilot qualification courses. Non-aircraft specific pilot courses on aviation mission planning, aerodynamics, aviation medical issues, etc. The contractor will have access to the Host Nation aviation mission planning system/device on any TO that requires AMPS duties. Conduct formal academic and hands-on demonstration training: Individual Aircraft Repairer general and aircraft specific maintenance courses. Aviation Organizational/Line Unit maintenance courses. Aviation Intermediate/Allied Shops maintenance courses. Training on advanced maintenance skills such as technical inspection, quality control, production control, maintenance management, etc. Training on supporting aviation systems including ground support equipment, special tools, aviation sets/kits/equipment, and air traffic control communication systems. Provide advice, informal training, mentorship, and assistance to: Enhance unit flight and tactical operations. Conduct individual and collective sustainment training. Promote host nation aviation safety. Assist to establish host nation aviation systems, programs, processes, and SOPs; especially in the areas of safety, operations, training, standardization, maintenance, logistics, and sustainment. Inform host nation personnel of US Army Aviation best practices and lessons learned. Technical Assistance Related Services. Provide technical assistance and expertise required to operate, maintain, sustain or return complex customer-nation aviation systems to operational readiness. Examples include: Conducting specific aircraft systems-related training courses, assisting the customer to implement an automated aviation technical supply system, or advising them on how to establish Aircrew Life Support Equipment (ALSE) training program. Each TO will address specifics on the required technical assistance tasks to be performed. Generic Aviation Maintenance Related Technical Assistance Task Statement. Provide technical assistance and expertise to repair, modernize, inspect or validate the mission readiness of host nation aviation equipment or weapon systems and its components. All final inspections will be accomplished by the Government or customer-nation. Training of customer-nation personnel is not the primary focus during these missions. Any training benefit derived is collateral to the primary mission. Essential Maintenance Related Subtasks may include: Inspect, troubleshoot and repair equipment (type of equipment TBD at TO level) IAW an Army Aviation and Missile Command Aviation Safety Action Memo (ASAM) or Safety of Flight Message (SOFM) to restore the equipment (type of equipment TBD at TO level) model helicopter to mission readiness status. Operational Planning. Analyzing emergent requirements and assisting in plan development to meet those requirements. REQUIRED QUALIFICATIONS All flying Contractor members shall meet the qualification requirements of DCMA INST 8210.1D (AR 95-20). ELIGIBILITY The applicable NAICS code for this requirement is 611512 (Flight Training), with a Small Business Size Standard of $34.0M. The Product Service Code is U099 (Education/Training - Other). Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. *NOTE 01: The current SBA Table of Small Business Size Standards was updated 17 March 2023; since the beginning of 2022, the SBA has regularly updated the table to account for inflation. Businesses must update their SAM.gov profiles to have their small business status reflect the most current small business size standards. Until updated, the SAM profiles will continue to display the small business status under outdated size standards. *NOTE 02: In accordance with 13 C.F.R. 121.104, the current calculation for dollar (monetary) value based NAICS codes is average total receipts over the last five (5) completed fiscal years *NOTE 03: In accordance with 13 C.F.R. 121.106, the current calculation for employee based NAICS codes is average number of employees used for each pay period for the preceding completed 24 calendar months. ADDITIONAL INFORMATION The estimated period of performance consists of five-year base with performance commencing in late May 2027. The Government may issue by bi-lateral extension extend the ordering period of this contract for up to an additional five (5) years provided the maximum (total contract minimum) designated in the schedule has not been exceeded. Therefore the total duration of the ordering period of performance, including the extension, shall not exceed 10 years. The contract type for task orders is anticipated to be a Firm Fixed Price. The base Indefinite Delivery Indefinite Quantity (IDIQ) contracts estimated ceiling is $249M. The Government is currently refining the acquisition strategy, and the planned approach has not yet been finalized. Your firm’s responses to this posting will assist the Government with its development. INDUSTRY DAY is being held on 3 February 2025. Individual Breakout Sessions are being held 4 February 2025. Instructions on how to register for industry day and individual breakout sessions are contained in the attachments. QUESTIONS AND ANSWERS SESSION: Individuals are encouraged to submit their technical questions via email to Ms.Shaniel Escoffery email shaniel.l.escoffery.civ@army.mil and Ms. Glenda Torres, email glenda.m.torres.civ@army.mil. no later than 3 pm, 9 January 2025. Technical questions submitted in advance will be addressed during the Questions and Answers Session at industry day, followed by an open discussion where the panel may address technical questions from the audience. No new technical questions are being accepted. SUBMISSION DETAILS (CAPABILITIES STATEMENT) Contractors are requested to submit a capabilities statement including a cover sheet of no more than 15 pages. Font shall be no smaller than Arial 10. The cover page should include company name, address, and points of contact including phone numbers and e-mail addresses. The cover sheet shall not count towards the page count. The deadline for response to the capability statement, industry day registration, and individual breakout session registration is no later than 3 pm, EST, 9 January 2025. All responses under this sources sought notice, industry day notification, and individual breakout registration must be e-mailed to Shaniel Escoffery,.shaniel.l.escoffery.civ@army.mil and Glenda Torres, email glenda.m.torres.civ@army.mil. This documentation must address at a minimum the following items: List the types of rotary wing pilot, maintainer, or base operations training capabilities your company had provided before or is currently providing. Provide contract numbers for reference, if these contracts are with the Army or other Department of Defense contracts. Describe your company’s capability and capacity to provide qualified trainers and advisors of U.S. Army Aviation Center of Excellence (USAACE) rotary wing pilots (standard pilot, instructor pilot, maintenance test flight evaluator, maintenance test pilot, aviation mission survivability officer, and aviation safety officer), and 15 series Military Occupational Specialty (MOS) jobs related to maintaining, repairing, and operating military aircraft such as maintainers (15B,15D,15F,15G, 15H, 15N,15R, 15Y) and crew members (15T, 15U) with additional qualifications of standardization instructor/ flight instructor, and flight engineer, and personnel capable of establishing base operations training capabilities. Describe your company’s experience (with examples) training and assisting in the following mission sets: FRIES, SPIES, Hoist, External Loads, Over water, HAR, HAATS, Aerial Gunnery, Aviation Special Operations, and Air Assault/Air Movement. Provide any supporting documentation reflecting the experience. This list of mission sets is not all inclusive and experience on any other type of mission sets can also be provided. Describe the company’s experience preparing employees for OCONUS deployment and meet all DoD Foreign Clearance Guide requirements for passports, visas, training and pre-deployment preparations. Does your company have experience with training, advising, and assistance with foreign customers with differing cultures to include language barriers in an austere environment? Please include OCONUS locations, types of performance/services provided, and contract numbers. Can or has your company managed a task of this nature? If so, please provide details. Can or has your company managed a team of subcontractors before? If so, provide details. What specific technical skills does your company possess which ensure capability to perform the requirements detailed above? Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, DUNs number, etc. A statement indicating if your firm is a large or small business under NAICS code 611512; if small business, please indicate any applicable socio-economic status [i.e., 8a, Small Disadvantaged Business (SDB), HUBZone, Veteran-Owned Small Business (VOSB), Service-Disabled Veteran-Owned Small Business (SDVOSB), or Women-Owned Small Business (WOSB). Your firm’s response to this Sources Sought, including any capabilities statement, shall be electronically submitted in either Microsoft Word or Portable Document Format (PDF). The information provided to this Sources Sought shall not be proprietary and may be utilized to assist the determination of the acquisition strategy to follow for this future effort. The information will be retained to document the Market Research Report and will be classified as Controlled Unclassified Information under Acquisition/Procurement disposition. All questions must be submitted to the contract specialist identified above. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought. NOTE (LIMITATIONS ON SUBCONTRACTING): If you are a small business interested in being the prime contractor for this effort, please be advised that FAR clause 52.219-14 (Limitations on Subcontracting) (DEVIATION 2021-O0008) was updated in September 2021. The current clause adds the definition of “Similarly Situated Entity” and the 50% calculation for compliance with the clause. Small business prime contractors may now count “first tier subcontractor” work performed by a “Similarly Situated Entity” as if it were performed by the prime contractor itself. To assist in our market research and set-aside determination for this effort, if you are a small business interested in priming this effort and plan to utilize a “Similarly Situated Entity” to meet the Limitations on Subcontracting requirements, please identify the name & Unique Entity ID/CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned “Similarly Situated Entity” should be included in answering any questions outlined in the SSN in order to assist the Government's capability determination. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A “REQUEST FOR PROPOSAL (RFP)” TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. AMENDMENT 01- Providing Slides presented by the Govt at Industry Day, as well as the KTR POC Email list. Questions received are under review and will be provided at a later date. All documents have been cleared for released.
70%
Market Research01/17/2025
************* UPDATE due to ERRORED ENTRY *************************** CORRECTION: There was an error entered in SAM.gov during the uploading of Ammendment 3. The USG inadvertently revised the "Due Date" to the Evaluation Phase III due date of 26FEB26 from 15DEC25. This was an error. The Date Offers Due has been changed back to 15 December 2025 to reflect the date that initial proposals were due to the USG. The change in the date to February 26, 2026 was in error and is only applicable to the offerors who have been selected to progress to Phase III. The USG is not accepting additional Phase I submissions. ACC-RSA is proud to announce the release of the final Flight School Next Call For Solutions (C4S) under the Army Aviation Training CSO. This is the official release and the final documents for Industry. All previous versions of any of these documents should be considered null and void. Please read all attached documents, Instructions, and additional information. The previously used QR Code is no longer valid. Please ensure all new questions are routed using the UPDATED QR code and link. ************ PRE-SOLUTION CONFERENCE INFORMATION ************* As mentioned in SPN #6, the FSN team will be hosting a Pre-Solution Conference at Redstone Arsenal, Bob Jones Auditorium on Thursday, 12/4/2025 at 0900 - 1100 hrs. Doors will open between 0800 and 0830. The event will last approximately 2 hours and will include a complete reivew of the CSO, C4S, SOO and a discussion of each of the four Phases of Submissions and Evaluations. If you are not able to attend, the event will be recorded. We are also anticipating a transcript becoming avaiable is technology is cooperative. Once the recording, transcrips, and slides are approved through required channels, all three will be posted to SAM.gov for all to have access. On behalf of the FSN team, we look forward to seeing you on the 4th of December. ******************************************************************************************************************************** CALL FOR SOLUTIONS. This Call for Solutions is the first, approved, call under the CSO – U.S. Army Aviation Training, formerly “DRAFT CSO – Flight School Next”, W9113M-25-S-C006. This requirement is the future of the Initial Entry Rotary Wing (IERW) Training Program at Fort Rucker, Alabama, known as Flight School Next (FSN). The United States Government (USG) seeks a Contractor-Owned, Contractor-Operated (COCO) solution using commercially available services and equipment on a single contract to provide annual training for 900 -1500 rotary wing pilots. The innovative commercial service to be acquired will be the first-time use of a fully commercial training platform for U.S. Army Aviation training. The contractor shall provide all services and equipment required to train pilots to a U.S. Army standard equivalent to the Federal Aviation Administration’s (FAA) commercial helicopter pilot certification, including single engine aircraft, parts, maintenance, instructors (both academic and flight), and simulation (if required). The place of performance to train the rotary wing pilots will be located at Fort Rucker, Alabama. The intent of the FSN Program is to increase the proficiency of U.S. Army aviators using commercially available equipment and instruction practices.
68%
Solicitation12/15/2025
The Federal Aviation Administration (FAA), Mike Monroney Aeronautical Center (MMAC), Oklahoma City, Oklahoma, has a requirement for Spin and Spin Recovery Training for FAA Aircraft Certification Flight Test Pilots (FTP) (FAA course 21800090) employed by the Federal Aviation Administration (FAA). Award will be made to the Lowest-Priced Technically Acceptable (LPTA) offeror deemed responsible and whose proposal is responsive to the solicitation requirements. The FAA contemplates award of an Indefinite Delivery/Requirements type contract with 1-year base period with four (4), 1-year option periods per aircraft. NO PHONE CALLS PLEASE. ALL QUESTIONS MUST BE IN WRITING AND EMAILED TO THE CONTRACTING SPECIALIST. CONTACT INFORMATION BELOW. All interested sources should first attempt to download the attached SIR and supporting document(s). If downloading is not possible, all request for copies of the SIR documents(s) must be made in writing to the attention of Gilbert Park, Contracting Specialist (AAQ-740), via e-mail at gilbert.n.park@faa.gov. Any and all questions pertaining to this SIR should be submitted in writing to the contract specialist at, gilbert.n.park@faa.gov by 3:00 p.m. CST on November 6, 2026 to allow for adequate response time. No questions will be allowed after that date and time. Technical and cost proposals must be received by the FAA no later than 5:00 P.M. CST, November 27, 2026. Proposals must be submitted electronically to gilbert.n.park@faa.gov, and addressed with the SIR Number 6973GH-26-R-00243. All submittals will need to allow sufficient time to process through security procedures in place at the Aeronautical Center. In accordance with SIR Section L provision 3.2.2.3-14 entitled, "Late Submissions, Modifications, and Withdrawals of Submittals," any proposals received after the due time and date of 5:00 p.m. CST, November 27, 2026, will not be considered. In addition, if all requested information is not furnished in the offeror's proposal, the offeror's proposal may be determined to be non-responsive and ineligible for consideration for contract award. The SIR/RFO is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of requested proposal documentation. Note: If you are viewing this from a third party source, other than the Sam website, please visit the Sam site at sam.gov, as some attachments do not transfer correctly to other websites.
66%
Solicitation11/27/2026
The Army has identified the following needs: (1) to rapidly train and qualify aviators in all platforms; (2) to transform aviation training to improve pilot proficiency by using the latest commercial practices and technology; and (3) to grow the aviation industrial base to better support the Army. This solicitation aims to provide the Army with access to innovative solutions enabling the Army to evolve quickly and maintain a competitive edge over adversaries. There are THREE identified Areas of Interterest: Fixed-Wing Aircraft Training Rotary-Wing Aircraft Training Unmanned Aerial Systems Training The Army intends to select the vendor whose solutions demonstrate the greatest potential to achieve its missions. This CSO is maximizing the following existing authorities, either as a single authority or a combination of the authorities below: 10 U.S.C. §4022 – Authority of the Department of Defense (DoD) to carry out certain prototype projects 10 U.S.C. §4023 – Procurement for Experimental Purposes 10 U.S.C. §3458 – Authority to acquire innovative commercial products and commercial services using general solicitation competitive procedures / DFARS 212.70 – Defense Commercial Solutions Opening Awards issued under this CSO include but are not limited to the following award instruments: FAR contracts under FAR Part 12 Commercial Procedures; any fixed price, or fixed price incentive contract type specified under FAR Part 16; and non‐FAR agreements such as transaction agreements under 10 U.S.C 4022, and 10 U.S.C 4023; for the Army and/or its customers that are directly relevant to enhancing the effectiveness of training, curriculum development, integration of innovation in training methodologies, demonstration of capabilities and evidence of mastery of basic aviation operation abilities to support Army modernization priorities and improve readiness. Consequently, under 10 U.S.C. 3458, Contracting Officers may acquire innovative commercial items, technologies, or services using a competitive procedure called a Commercial Solutions Opening (CSO). Under a CSO, the Department of Defense may competitively select proposals received in response to a Call for Solutions, based on a review of proposals by scientific, technological, or other subject-matter expert peers. Use of a CSO in accordance with DFARS Subpart 212.70 is considered to be a competitive procedure for the purposes of 10 U.S.C. 221 and FAR 6.102. Finally, Contracting Officers shall treat items, technologies, and services acquired using a CSO as commercial products and commercial services. Contracts or agreements under this authority shall be fixed-price, including fixed-price incentive fee contracts. Offerors are informed that ONLY a warranted Army Contracting/Agreements Officer (not a Contracting Officer Representative or other personnel) may contractually bind the Army. The Army shall not be liable to pay for work performed by a Offeror unless a warranted Contracting/Agreements Officer has signed an agreement in writing agreeing that the Army shall pay. The Army does not fund preparation of solution briefs/proposals, or support work efforts or tasks that are inferred from discussions with technical project officers. This CSO shall remain open indefinitely, however, due to SAM.gov system limitations, the submission due dates are limited to five years from the date of posting. The Government will amend this announcement to extend the submission due dates as needed to maintain the availability of the CSO.
66%
Combined Synopsis09/30/2030

Additional Details

Solicitation Number

W9124G22R0002

Archive Date

Apr 21, 2022

Office Address

FORT EUSTIS, VA, 23604-5538