Notice ID: 3caff375fce787bcb340a14fa681a1c8Combined Synopsis/Solicitation
Fire Fighter Uniform Service
Archived on September 7, 2017. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC+01:00
- Posted
- December 27, 2016
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 812332: Industrial Launderers
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QM MICC-FT STEWART
- Place of performance
- Fire Station 1 Address: 1164W 15th Street BLDG 1850 Fort Stewart, GA 31314 Fire Station 3 Address: 119 Coe Ave BLDG 457 Fort Stewart, GA 31314 Fire Station 5 Address: 312 Lowe Circle BLDG 7703 Wright Army Airfield, GA 31314 Hunter Army Airfield Fire Stations Locations: Fire Station 2 Address: 228 S. Lightening Road BLDG 1295, Hunter Army Airfield, GA 31409 Fire Station 4, Address: 1973 N. Lightning Road BLDG 8059, Hunter Army Airfield, GA 31409, Fort Stewart, 31314
- PSC
- 84: CLOTHING, INDIVIDUAL EQUIPMENT, INSIGNA, AND JEWELRY
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- W9124M17T0008
- Notice ID
- 3caff375fce787bcb340a14fa681a1c8
Description
STATEMENT OF WORK Fire Fighter Uniforms Service Contract 1. General: : The Contractor shall furnish all personnel, uniforms, cleaning services, to provide a full service uniform rental program for the Fort Stewart and Hunter Army Airfield Fire Department. 1.1 Location of Work Site: Site of work is located at five (5) Fire Stations at Fort Stewart and Hunter Army Airfield, Georgia. 1.2 Description of Equipment/Services: The Contractor shall furnish all personnel, uniforms, cleaning services, to provide a full service uniform rental program for the Fort Stewart and Hunter Army Airfield Fire Department. The supplies and services must be rendered no later than 180 days from award of contract. The contractor will report to the Fire Stations at both locations to conduct sizing for each and every Firefighter and Fire Officers. All work shall be accomplished between the hours of 8:00 a.m. thru 5:00 p.m. The rental contract includes: 1. All garments provided shall be NEW at the initiation of the contract. 2. Successful vendor must be capable of providing all services as outlined for all fire stations. Subcontracting services shall not be allowed. 1.2.1 Fitting and Sizing: Uniforms shall be provided that are properly fitted to each individual including any unusual or unique sizes necessary to insure comfortable wear. Each employee shall be individually measured by trying on sample uniforms provided by the contractor. Uniform fitting shall occur within thirty (30) days of contract award and within fourteen (14) days when new or additional employees are added. Size alterations or exchanges shall be made at any time different size garments are needed due to individual's weight change or other such conditions as may warrant a change to insure comfortable wear at no additional charge. 1.2.2. Uniform Quantities: Under the terms of this contract, uniforms for each employee shall be provided as follows: 1. Eight (8) Navy Blue Station Shirts per person for up to 78 Fire Fighting Personnel 2. Eight (8) Navy Blue Station Pants per person for up to 78 Fire Fighting Personnel 3. Eight (8) White Polo Shirts per person for up to 8 Operations Officers 4. Eleven (11) White Polo Shirts per person for up to 6 Fire Prevention Team Members 5. Two ( 2) White Polo Shirts per person for up to 3 Administrative Personnel 6. Two (2) Navy Job Shirts per person for up to 78 Fire Fighting Personnel 7. Two (2) Black Job Shirts per person for up to 17 Operations Personnel (Operations, Fire Prevention, and Administrative Personnel) 8. One (1) Light Blue Long Sleeve Dress Shirt per person for up to 78 Fire Fighting Personnel 9. One (1) Black Tie per person for up to 95 personnel (78- Fire Fighters, 8 Operations Officers, 6 Fire Prevention Team Members, and 3 Administrative Personnel) 10. One (1) Long Sleeve White Executive Dress Shirt per person for up to 17 Operations Personnel (Operations, Fire Prevention, and Administrative Personnel) 11. Two (2) Short Sleeve White Executive Dress Shirts per person for up to 14 Operations Personnel ( Operations and Fire Prevention) 12. Eleven (11) Short Sleeve White Executive Dress Shirts per person for up to 3Administrative Personnel 13. Eight (8) Black Pants per person for up to 8 Operations Personnel 14. Eleven (11) Black Pants per person for up to 9 Fire Prevention and Administrative Personnel 15. Six (6) Blue 100% Cotton TShirts per person for up to 95 personnel (Fire Fighters, Operations, Fire Prevention, and Administrative personnel) 16. One (1) Winter Jacket per person for up to 95 personnel ( Fire Fighters, Operations, Fire Prevention, and Administrative Personnel) 17. One (1) black belt per person for up to 95 personnel (Fire Fighters, Operations, Fire Prevention, and Administrative Personnel) All sizing must be completed per person by the contractor. The Fire Department will provided a name list of all personnel. The Fire Department will provide the uniform type for each person to the contractor before sizing is scheduled. 1.2.3. Uniform Delivery: The contractor shall pickup soiled laundry and deliver cleaned laundry once each week at each Fire and Emergency Services (F&ES) facility. Pickup and delivery shall occur on the same day and at the same approximate time each week and shall be coordinated with the Contracting Officer Technical Representative (COTR). The vendor shall be responsible for notifying each facility at least one week in advance of any change in schedule due to holidays. 1. Laundered garments shall be returned grouped according to individual employee, on clothes hangers and placed in polyethylene type bags. 2. Every garment must be bar-coded and must be electronically tracked in and out of each fire station facility. A hand-held scanning system should be used and a receipt of pickup and delivery must be left at the time of service. 1.2.4 Pick Up and Delivery: The contractor shall pickup soiled laundry and deliver cleaned laundry once each week at each Fire and Emergency Services (F&ES) facility. Pickup and delivery shall occur on the same day and at the same approximate time each week and shall be coordinated with the Contracting Officer Technical Representative (COTR). The vendor shall be responsible for notifying each facility at least one week in advance of any change in schedule due to holidays. 1.2.5 Cleaning and Laundering: 1. All garments shall be laundered and processed to be free of wrinkles prior to return to each fire station facility. 2. All uniforms will be pressed on a double buck press, cuff, collared and sleeved. Pants will be pressed and placed on strut hangers. 3. Laundering process shall be sufficient to remove soil, stains, and odors. Part of the cleaning process shall include an inspection of all garments to identify needed repairs. Any repair needs identified during the inspection process shall be remedied prior to return of the garment. 4. Garments are to be processed to ensure timely deliveries and a one day (24 hour) response time to any issues that may arise. 1.2.6 Maintenance and Repair: 1. The contractor shall keep all garments in good state of repair and in serviceable condition. 2. Repairs shall be made to all garments as identified through inspection during the cleaning process or by notification by the fire department employee. 3. Repairs must be made using Fire Resistant thread and Fire Resistant fabric. 4. Sufficient quantities of "Repair Tags" shall be provided each facility to allow individual employees to communicate the need for repair or alteration. 5. Any repairs must meet NFPA 1975 standards and maintain acceptable appearance. 6. In the event a garment is deemed unusable (un-repairable or stained) by the Contracting Officer Technical Representative (COTR), said garment shall be replaced with a like-new garment of like size and material within seven (7) days. 1.2.7 New and Additional Employees: At any such time as new or additional employees are added to the Fort Stewart/ Hunter Army Airfield Fire Department, new uniforms shall be provided within fourteen (14) days from date of request for additional garments. 1.2.8 Lost or Stolen Garments: 1. The fire department shall be billed for lost or stolen garments while the said garments are in the possession of a member of the fire department. 2. The contractor shall replace, free of charge, lost or stolen garments while said garments are in the possession of the contractor. 1.2.9 Uniform Specifications: 1. Shirts: NFPA 1975, Navy Blue in color with 5 sewn-in military creases, epaulets, collar band and double-stitched front placket. Hidden snaps, pencil slot, badge tab, hook-and loop pocket closures and Melamine buttons. All emblems must be sewn on by the uniform provider (flag and company logo). Shirts must have extra-long tails and be permanently pressed through an autoclaving process. Uniforms must also be certified to the NFPA 1975 station uniform standard. These must be available in mens and womens sizes. Embroidered employee name tag of like material to manufacture by the contractor and sewn above right breast pocket. 2. Pants: NFPA 1975, Navy Blue or black in color (based on employee position) with double stitched seams including zipper area which includes a solid brass zipper. An abundance of pockets including, large rear wallet pockets. Pants must be full cut for a roomy fit with permanent creases, and must be permanently pressed through an autoclaving process. Pants must be certified to the NFPA 1975 station uniform standard. 3. Executive Shirts: White and Light Blue in color; Long Sleeve and Short Sleeve 4.25 oz. per sq/yd 65/35 Dacron Polyester/Cotton Duro Poplin, Shoulder straps cross stitched symmetrically for neater appearance, 7-button placket front, Lined finish on band and yoke made of same shirt material, Pleated pockets and scalloped pocket flaps with Velcro closures, 5 sewn-in creases - 2 in front, continuing through the pocket and pocket flap, and 3 in back, Full badge sling, Hidden pencil compartment inside left breast pocket, Optional concealed zipper may be added on placket front styles. 4. Belt: 1- inch wide, 100% Leather, Black in color with Silver or Gold buckle based on employee position. 5. Polo Shirts: White in color, 3.8oz, Polyester/Cotton Blend, Flame resistant, short sleeve, double needle stitching, wrinkle resistant, Dress Style, Button up, Pencil/Pen Slot on Sleeve, wick moisture managed, tag free 6. Tie: Black in Color, Snap on 7. Job Shirt: Navy Blue and Black in Color, 1.2.10 Emblems, Patches, and Nametapes: 1. Emblems and patches are provided by fire department are the Organizational patch and American Flag. 2. Name Tapes are provided by the contractor and shall be of like color and fabric of the shirt. Name tape shall be 1-inch wide with embroidered 3?4-inch block letters employees first initial and last name embroidered in navy letters. Executive Shirts shall have no Name tapes. 3. Emblems, patches, and nametapes shall be affixed to garments by Nomex thread by the contractor prior to delivery of the initial issue. Glue and other adhesives will not be permitted under any circumstance. 1.3 Personnel: 1.3.1 Contracting Officers Representative (COR): The Government shall provide a COR. This individual shall be responsible for the overall management and coordination of this contract and shall act as a central point of contact with the Government. This individual shall be available for contact during periods when work is being performed. Work will be performed between the hours of 8:00 am and 5:00 p.m. 1.3.2 Other Personnel: The contractor shall furnish supervisory, administrative, and direct personnel to accomplish all work required. 1.3.3 Contractor Identification: The required identification badge such as a valid drivers license should be on hand and presented to the Main Gates at Fort Stewart and Hunter Army Airfield for entry on the Installations. 1.4 Fort Stewart/HAAF Particulars: 1.4.1 Facility: For Fiscal Year 2017, the Fort Stewart/ Hunter Army Airfield Fire and Emergency Services will operate at five (5) locations. We operate with a full staff of 95 personnel. Exact quantities to be provided at each location will be determined according to number of personnel assigned to each location. The facilities are located as follows: Fort Stewart Fire Stations Locations: Fire Station 1 Address: 1164W 15th Street BLDG 1850 Fort Stewart, GA 31314 Fire Station 3 Address: 119 Coe Ave BLDG 457 Fort Stewart, GA 31314 Fire Station 5 Address: 312 Lowe Circle BLDG 7703 Wright Army Airfield, GA 31314 Hunter Army Airfield Fire Stations Locations: Fire Station 2 Address: 228 S. Lightening Road BLDG 1295, Hunter Army Airfield, GA 31409 Fire Station 4, Address: 1973 N. Lightning Road BLDG 8059, Hunter Army Airfield, GA 31409 All references to locations of rooms, buildings or function are for informational purposes only. Such references do not necessarily indicate that these locations or functions designations will remain unchanged. Changes of functional designations or locations which affect this contract and which require permanent changes in staffing requirements, and/or revenues will be coordinated by the Contracting Officers Technical Representative (COTR) and Contracting Officer (CO) prior to initiation of such changes to assure adequate contractual coverage. 1.4.2 Site Investigation/Technical Inspection (TI): N/A 1.4.3 Special Conditions: 1.4.3.1 The Government will not be responsible for any and all rental costs for equipment necessary to perform service. C.1.4.3.2 Once the contract is awarded the Contractor will be required to coordinate and schedule a time with the Fort Stewart Fire Department Logistics Section ( POC: Latika McClain 912-767-7440) to deliver the training prop. 1.4.3.3 Interference with Government Operation: The Contractor and the Contractors employees shall perform all work in such a manner as to avoid interference with regularly scheduled Government operational activities. Schedules for work shall be approved by the COR or his authorized representative and must reflect the Contractors ability to have the work area prepared for Government business to be performed each workday. 1.4.4 Period of Performance: The Contract period will include a base year (1st year) and four (4) option years. Each option year will be negotiable before the start of the upcoming option year. The Period of Performance will be as follows: Base Year: 1 February 2017- 31 January 2017 Option 1: 1 February 2018- 31 January 2018 Option 2: 1 February 2019- 31 January 2019 Option 3: 1 February 2020- 31 January 2020 Option 4: 1 February 2021- 31 January 2021 1.4.5 Payment: Contractor will create receiving report and invoice as 2N1 Services in iRapt monthly. 1.5 Technical Inspection (T.I.): 1.5.1 Technical Inspection (T.I.) and Inspections: The Government has the option to inspect work in progress and areas completed to assure that all requirements of the contract are being met. The Government will monitor the Contractors performance under this contract by physical inspection, review of written reports/documentation, and validated customer complaints. The Governments elected inspection in no manner relieves the Contractor of the independent responsibility to meet the contract requirements and perform work in accordance with industry standards. 1.6 Work Area Access: The Contractors access to the worksites must be coordinated with the organizations designated COR due to this being a secured area. A Government Escort will be provided during performance of services in designated areas. 1.7 Hours of Operation: The Contractor is required to perform work during the hours 8:00 AM 5:00 PM, Monday thru Friday, Government holidays excluded, unless otherwise authorized by express written consent of the Contracting Officer. The Contractor shall identify their proposed hours of operation within the submission. Such submission, once accepted by the Government, becomes the official hours of operation authorized by the contract. 1.8 Circumstances to be reported: The Contractor or the Contractors employees shall report any circumstances of needed repair of the tools to Contracting Officers Representative. Unhealthy or hazardous conditions or interference with the work caused by Government employees shall be reported immediately to the Contracting Officer or his representative. 1.9 Local Rules and Regulations: The Contractors, subcontractors, suppliers and their employees shall be governed by local rules and installation regulations. No weapons or alcohol will be brought to the installation. Smoking will only be done in those areas designated for smoking. 1.10 Security Requirements: The Contractor and his employees shall be required to comply with pertinent Installation Regulations on security as prescribed in AR 380-5 which are in effect or may be put into effect during the course of performance of work under the contract. 1.11 Fire Regulations: The Contractor and his employee shall be required to comply with pertinent Installation Regulations on fire prevention as prescribed in AR 420-1. Which are in effect or may be put in effect during the performance of work under this contract. 1.12 Accident Prevention: 1.12.1 In order to provide safety controls for protection to the life and health of employees and other persons; for prevention of damage to property, materials, supplies, and equipment, and to avoid work interruptions in the performance of this contract, the Contractor shall comply with all pertinent provisions of the Armys safety regulations and will also take or cause to be taken such additional measures as the Contracting Officer may determine to be reasonably necessary for the purpose. 1.12.2 The Contractor shall maintain an accurate record of and will report to the Contracting Officer in the manner and on the forms prescribed by the Contracting Officer, exposure data and all accidents resulting in death, traumatic injury, occupational disease, and/or damage under this contract. 1.12.3 If the Contracting Officer notifies the Contractor of any noncompliance with foregoing provisions and the action to be taken, the Contractor shall, after receipt of notice, immediately correct the deficiencies. Such notice when delivered to the Contractor or his representative at the site or work shall be deemed sufficient for this purpose. If the Contractor fails or refuses to comply promptly, the Contracting Officer may issue a stop payment order on work performed under this contract until satisfactory corrective action has been taken. 1.12.4. Contractor must enter work data in the Contracting Manpower Reporting Application (CMRA) At https://cmra.army.mil/default.aspx?ReturnUrl=%2F. The data entered should contain number of employees, work location data, manpower hours, direct labor cost and so forth. The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor shall report ALL Contractor manpower (including Subcontractor manpower) required for performance of this contract. The required information includes (1) Contracting Office, Contracting Officer, Contracting Officers Technical Representative (COTR), also known as the Contracting Officer Representative (COR), (2) Contract Number, including task and delivery order number, (3) Beginning and ending dates covered by reporting period, (4) Contractors name, address, phone number, email address and the identity of Contractor employee entering data, (5) Estimated direct labor hours (including Subcontractors, if different), (6) Estimated direct labor dollars paid this reporting period (including Subcontractors), (7) Total payments (including Subcontractors), (8) Predominant Federal Several Code (FSC) reflecting services provided by Contractor (and separate predominant FSC for each Subcontractor, if different, (9) Estimated data collection costs, (10) Organization title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Army Requiring Activity is responsible for providing the Contractor with its UIC for the purpose of reporting this information), (11) Locations where Contractor and Subcontractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas location, using standardized nomenclature provided on website), (12) Presence of deployment or contingency contract language and (13) Number of Contractor and Subcontractor employees deployed in theater this reporting period (by country). As part of the submission, the Contractor shall provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period shall be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by October 31 of each calendar year. Contractors shall use a direct XML data transfer to the database server or fill in the fields on the website. The XML direct transfer is a format for transferring files from a Contractors system to the secure website without the need for separate data entries for each required data element at the website. The specific formats for the XML direct transfer may be downloaded from the website. 1.13 SECURITY REQUIREMENTS: 1.13.1 Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by the government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by Installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes. 1.13.2 All contractor employees, to include subcontractor employees, requiring access Army installations, facilities and controlled access areas shall complete AT Level 1 Awareness Training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 30 calendar days after completion of training by all employees and subcontractor personnel. AT Level 1 awareness training is available at the following website: https://atlevel1.dtic.mil/at. 1.13.3 Access and General Protection/Security Policy and Procedures. Contractor and all associated subcontractor employees shall comply with applicable installation, facility, and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes. 1.13.4 Post-award conference or periodic progress meetings: The contractor agrees to attend any postaward conference convened by the contracting activity or contract administration office. These procedures are identified in FAR Subpart 42.5. The Contracting Officer, COR, and other government personnel, as appropriate, may meet periodically with the contractor to review the contractors performance. At these meetings, the Contracting Officer will apprise the contractor of how the government views the contractors performance, and the contractor shall apprise the government of any problems experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government. 1.13.5 COR: The COR for this contract is the Fort Stewart General Supply Specialist, Latika McClain, located at 1164W 15th Street, Fort Stewart, Georgia 31314. The COR shall monitor all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure the contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, monitor contractors performance and notify both the Contracting Officer and contractor of any deficiencies; coordinate availability of government-furnished property; and provide site-entry for contractor personnel. A letter of designation will be issued to the COR, a copy of which will be sent to the contractor detailing the responsibilities and limitations of the COR. The COR is not authorized to change any of the terms and conditions of the contract. 1.13.6 Contract Manager: The contractor shall manage the contract or shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor during absences shall be designated in writing and provided to the Contracting Officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. 1.13.7 Identification of Contractor Employees: All contract personnel attending meetings, answering government telephones, and working in other situations where their contractor status is not obvious to third parties shall be required to identify themselves as contractors to avoid creating an impression in the minds of members of the public that they are government officials. They shall also ensure all documents or reports produced by the contractor are suitably marked as contractor products or that contractor participation is appropriately disclosed. 1.13.8 Telephone Usage: Contractor employees shall not use Government telephones at the work site for personal reasons or make any toll or long distance calls. 1.2. General Information 1.2.1. Quality Control: Quality Control is the responsibility of the Contractor. The Contractor is responsible for the delivery of quality services/supplies to the Government (see FAR 52.246-1 Contractor Inspection Requirements). 1.2.1.1. Quality Control Program: The Government is committed to a highly interactive relationship between quality control by the Contractor and quality assurance by the government recipient of services. This relationship shall be achieved through an effective Prevention Based Quality Control Program dedicated to ensuring the best possible products and services to end users. 1.2.1.1.1. The Contractors quality program shall demonstrate its prevention-based outlook by meeting the objectives stated in the PWS throughout all areas of performance. The QCP shall be developed to specify the Contractors responsibility for management and quality control actions to meet the terms of the contract. The QCP as a minimum shall address continuous process improvement; procedures for scheduling, conducting and documentation of inspection; discrepancy identification and correction; corrective action procedures to include procedures for addressing Government discovered nonconformances; procedures for root cause analysis to identify the root cause and root cause corrective action to prevent re-occurrence of discrepancies; procedures for trend analysis; procedures for collecting and addressing customer feedback/complaints 1.2.1.1.3. The Contractors QCP shall be incorporated into and become part of this contract after the plan has been accepted by the KO. Proposed changes made after KO acceptance shall be submitted in writing through the COR to the KO for review and acceptance prior to implementing any revision. The Contractors QCP shall be maintained throughout the life of the contract and shall include the Contractors procedures to routinely evaluate the effectiveness of the plan to ensure the Contractor is meeting the performance standards and requirements of the contract. 1.2.1.2. Contractor Discrepancy Report (CDR): When the Contractor's performance is unsatisfactory, a CDR will be issued. The Contractor shall reply in writing within five (5) work days from the date of receipt of the CDR, giving the reasons for the unsatisfactory performance, corrective action taken, and procedures to preclude recurrence. 1.2.1.3. Quality Assurance: The COR will evaluate the Contractors performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the COR must do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s). When an observation indicates defective performance, the COR will require the Contractor or designated on-site representative to initial the observation to acknowledge the defective performance. The acknowledgement of the observation does not necessarily constitute Contractor concurrence with the observation, only that the Contractor has been made aware of the defective performance. 1.2.3. Recognized Federal Holidays: The Contractor shall not be required to perform services on recognized federal holidays. The recognized federal holidays include: New Years Day Labor Day Martin Luther King Jr. s Birthday Columbus Day Washingtons Day Veterans Day Memorial Day Thanksgiving Day Independence Day Christmas Day 1.2.3.1. When a holiday occurs on a Saturday, Federal employees are normally granted the previous Friday as the holiday observance. When a holiday occurs on a Sunday, Federal employees are normally granted the following Monday as the holiday. The contractor shall work on the days the Government is scheduled to work. 1.2.3.2. When an unforeseen installation closure occurs on a regularly scheduled day of work, the Contractor will have the following options: 1.2.3.2.1. Reschedule the work so it is performed the following day unless the following day falls on a weekend. 1.2.3.2.2. Reschedule the work on any day that is mutually satisfactory. 1.2.4. Hours of Operation: The Contractor shall be responsible for providing services, between the hours of 08:00AM- 5:00PM Monday through Friday, except federal holidays or when the government facility is closed due to local or national emergencies, administrative closings or similar government directed facility closings. For other than firm fixed price contracts, the Contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor shall at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential to successful performance under this contract. No overtime (OT) or compensatory time (CT) is authorized. Contractor personnel shall not exceed a 40 hour work week; flexible work schedule may be considered. 1.2.5. Place of Performance: IAW PARC Policy Alert 14-33, Homeland Security Presidential Directive 12 (HSPD-12) issued 31 Dec 13.)(If applicable) Contractor shall have routine access to Governmentcontrolled facilities. The work to be performed under this contract shall be accomplished at Fort Stewart/ Hunter Army Airfield Fire Department; Contractor facility; or government facilities. 1.2.5.1. Access and General Protection/Security Policy and Procedures: All Contractor personnel performing work under this contract shall comply with applicable installation, facility and area commander installation/facility access, local security policies and security procedures provided by the Security Manager Government representative. Contractor personnel shall provide all information required for background checks to meet installation access requirements to be accomplished by the installation Provost M...
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
W9124M17T0008- Combined Synopsis
- Combined SynopsisCurrentDec 27, 2016
Fire Fighter Uniform Service
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
W9124M17T0008
Archive Date
Sep 7, 2017