Notice ID: 48789f1780b1417a8ebc3c7260158156Award NoticeAwarded
John Day Dam Generator Repair
Awarded on August 31, 2018. Full description on SAM.gov.
Awarded tounder W9127N18C0083 (source: SAM.gov award notice)• $704.9K
Overview
- Posted
- November 15, 2018
- Notice type
- Award Notice
- NAICS
- 237990: Other Heavy and Civil Engineering Construction
- Agency
- Department of War
Notice details
- Place of performance
- Sherman County , OR
- PSC
- Z: MAINT, REPAIR, ALTER REAL PROPERTY
- Last updated
- Dec 4, 2025
- Award date
- Aug 31, 2018
- Award amount (SAM.gov award notice)
- $704.9K
Identifiers
- Solicitation number
- W9127N18R0006
- Notice ID
- 48789f1780b1417a8ebc3c7260158156
- Award number (PIID)
- W9127N18C0083
Description
Synopsis: The U.S. Army Corps of Engineer (USACE) Portland District intends to solicit construction firms who are interested in submitting a competitive firm-fixed price proposal for this project. This announcement is for the re-construction/repair of the John Day Main Unit 6 Generator and Rehabilitation located at the John Day Dam Project, Sherman County. OR. Project Scope: This project consists of the following: Generator Background: John Day Dam Main Unit 6 power generator was in the process of being placed on-line and suffered a three phase stator winding fault in July 2015. This caused the generator protective relays to trip. Generator Anticipated Repairs: The generator repairs will consist of inspecting the entire stator winding, including damaged areas; evaluating the condition of the winding; providing a comprehensive evaluation report; providing repair plans; removing and disposing of all damaged bars and their connections; cleaning the entire stator winding; testing the Government-furnished stator bars; supplying winding connections, non-deteriorating and deteriorating winding supplies; replacing the damaged stator bars with Government-furnished stator bars; replacing damaged bar connections with Contractor-furnished new connections; testing the stator winding; cleaning and inspecting the stator core; cleaning, inspecting, and testing the rotor; furnishing and installing a complete partial discharge analyzer system; inspecting the thrust bearing, thrust runner, thrust collar and guide bearings, and providing a comprehensive inspection report and Recommendation. Options to be Included: Inspection/Refurbishment of thrust bearing, thrust runner, thrust collar, upper and lower generator guide bearing(s), and turbine guide bearing; optional refurbishing of the replaced bearing if a spare bearing is used; and furnishing thrust runner bolts and keys. Acquisition Strategy: The solicitation will be a request for proposal (RFP). The Lowest Price Technically Acceptable source selection process will be used to evaluate proposals. Evaluation criteria will be stated in the RFP. The Government will include options in the RFP. This acquisition will result in a single fixed-price contract. Magnitude of Construction: The estimated cost of the project is between $1,000,000 and $5,000,000. Set Asides and Codes: This is an unrestricted, full and open acquisition. This effort is classified through the North American Industry Classification System (NAICS) under code 237990 - Other Heavy and Civil Engineering Construction. The Small Business Standard size ($36.5M). The FSC is Z2KA - Repair or Alteration of Dams. Proposal Procedures: The solicitation will be posted on the Federal Business Opportunities website, https://www.fbo.gov/, once it is issued. Firms are requested to register electronically to receive a copy of the solicitation when it is issued. Proposal Period: The solicitation is scheduled for release on or about 22 January 2018. The tentative date for receipt of proposals is on or about 21 February 2018. Plans and Specifications: The Plans and Specifications will also be posted on the Federal Business Opportunities website, https://www.fbo.gov/, once it is issued. Firms are requested to register electronically to receive a copy of the solicitation when it is issued. System for Award Management (SAM): Offerors must register in the SAM at https://www.sam.gov/portal/public/SAM/ prior to submission of proposals and prior to receiving an award. Point of Contact: The USACE-NWP Contracting Office will be the sole point of contact for this action. E-mail responses to the Primary Point of Contact, Joshua D. Fellwock at joshua.d.fellwock@usace.army.mil. E-mail is the preferred method for receiving responses to this pre-solicitation notice. THIS PRE-SOLICITATION NOTICE IS FOR THE PURPOSE OF INFORMING INDUSTRY THAT THIS SOLICITATION WILL BE POSTED ON FBO ON OR ABOUT 22 JANUARY 2018. THIS NOTICE IS NOT A REQUEST FOR PROPOSALS AND PROPOSALS RECEIVED AS A RESULT OF THIS PRE-SOLICITATION NOTICE WILL NOT BE ACCEPTED OR EVALUATED. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION EITHER BEFORE OR AFTER THE CLOSING DATE. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS PRESOLICITATION NOTICE OR ANY FOLLOW-UP INFORMATION REQUEST.
Award Overview
Award Number
W9127N18C0083
Award Amount (SAM.gov award notice)
$704.9K
Award Date
Aug 31, 2018
Awardee
Awardee UEI
N461RLJXN9S1
Original Solicitation
Notice ID: 48789f1780b1417a8ebc3c7260158156
Posted Date: Nov 15, 2018
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W9127N18R0006- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- 8×Pre-SolicitationDec 26, 2017
John Day Dam Generator Repair
- SolicitationJun 28, 2018
John Day Dam Generator Repair
- Pre-SolicitationJun 28, 2018
John Day Dam Generator Repair
- SolicitationJun 28, 2018
John Day Dam Generator Repair
- 2×AwardedCurrentNov 15, 2018
John Day Dam Generator Repair
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
PROJECT TITLE: JOHN DAY UNIT 10 PACKING BOX REPLACEMENT PROJECT LOCATION: JOHN DAY DAM, SHERMAN COUNTY, OREGON THIS IS A FULL AND OPEN PROCUREMENT. IN ACCORDANCE WITH RFO 19.110, THIS PROJECT REQUIRES THE HUBZONE 10% PRICE EVALUATION. THE JOHN DAY DAM ON THE COLUMBIA RIVER BETWEEN SHERMAN COUNTY, OREGON, AND KLICKITAT COUNTY, WASHINGTON. THE ESTIMATED MAGNITUDE OF CONSTRUCTION IS BETWEEN $500,000.00 AND $1,000,000.00. THE NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE FOR THIS ACTION IS 237990; OTHER HEAVY AND CIVIL ENGINEERING CONSTRUCTION WITH A SMALL BUSINESS SIZE STANDARD OF $45M. AS PRESCRIBED IN DFARS 204.7504(A), THIS REQUIREMENT INCLUDES DFARS CLAUSE 252.204-7021 COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION (CMMC) LEVEL REQUIREMENTS. THE CMMC LEVEL REQUIRED BY THIS SOLICITATION IS CMMC LEVEL 1. BID OPENING WILL OCCUR ONE (1) HOUR AFTER BID CLOSING AT 2:00 PM PST DECEMBER 4TH, 2026. | 97% | Solicitation | 12/04/2026 |
* Bid Abstract uploaded September 21, 2026. * Amendment 0003 - The purpose of this amendment is to make the following changes to the solicitation: SOLICITATION CLOSING DATE The solicitation closing date is hereby extended from Friday, September 18, 2026, at 9:00 PM Pacific Daylight Time (PDT) to Monday, September 21, 2026, at 9:00 AM Pacific Daylight Time (PDT). NEW SOLICITATION CLOSING DATE: Monday, September 21, 2026, at 9:00 AM Pacific Daylight Time (PDT) BID OPENING The bid opening will be conducted on Monday, September 21, 2026, at 10:00 AM Pacific Daylight Time (PDT). Bids received prior to the solicitation closing date and time will be secured and opened at the date and time specified above. Will send TEAMs link once BID is received. *Amendment 0002 - The purpose of this amendment is to make the following changes to the solicitation: 1. Extend the Solicitation Closing Date: The solicitation closing date is hereby extended by one week, from September 11, 2026, to September 18, 2026. 2. Clarify Bidder Inquiry Deadline: The bidder inquiry provision is revised from: No response will be posted to inquiries after Close of Business on the seventh business day preceding the solicitation due date to: The deadline for submission of bidder inquiries is Close of Business on the seventh business day preceding the solicitation due date. Inquiries received after this deadline may not be answered. 3. Add Pertinent Documents/Attachments: The following six (6) documents/attachments are hereby added to the solicitation: A9 - Work Space Access Trailer and Parking Location, A10 - Pump Access, A11 - Propeller Condition, A12 - JDA Fish Pump rehab drawings, A13 - SouthFishwayPumps_OandM Manual, A14 - SouthFishTurbine-Unit3_OandM Manual (all documents previously designated as CUI have been downgraded) 4. Remove Attachment: Attachment AMD0002_Technical Sections.pdf is hereby removed from the solicitation. 5. Revise Specifications: The following revisions are hereby incorporated into the solicitation specifications: File Section Changes Specifications 15 00 00.03 25 Paragraph 1.4.2 is revised to change pump shaft assembly and propeller assembly to vertical shaft assembly. Paragraph 2.1.2 is revised to change pumpshaft to pump propeller. Specifications 01 10 10.00 25 Paragraph 1.6.b is amended to extend the outage window through June 30, 2028.Specifications 09 97 02.00 25 Paragraph 3.5 is amended to include the extension shaft in the painting schedule. All other terms and conditions of the solicitation remain unchanged.*Amendment 0001 - The purpose of this amendment is to extend the solicitation closing date by two weeks from August 28, 2026 to September 11, 2026. All other terms and conditions of the solicitation remain unchanged. PROJECT TITLE: JOHN DAY FISH PUMP REHABILITATION PROJECT LOCATION: JOHN DAY LOCK AND DAM, RUFUS, OR DESCRIPTION: REMOVAL, REFURBISHMENT, AND REPLACEMENT OF MAJOR COMPONENTS OF FISH PUMP UNIT 1, INCLUDING BUT NOT LIMITED TO SHAFTS, BEARINGS, BEARING BRACKETS, AND RIGHT-ANGLE DRIVE GEARBOXES. MAGNITUDE OF CONSTRUCTION: BETWEEN $5,000,000 - $10,000,000 NAICS: 237990 OTHER HEAVY AND CIVIL ENGINEERING CONSTRUCTION SIZE STANDARD: $45,000,000 SOCIO-ECONOMIC CONSIDERATIONS: TOTAL SMALL BUSINESS SET-ASIDE Bid Opening: Monday, September 21st, 2026, at 10:00 AM Pacific Daylight Time (PDT). Will send TEAMs link once BID is received. Due to CMMC access requirements, in order to gain access to CUI attachments, please verify your organization has a minimum CMMC Level 1 Self verification and submit your CMMC Unique Identifier Number and CAGE Code via email to joseph.b.jarvis@usace.army.mil and cory.r.pfenning@usace.army.mil. BIDS DUE: Friday, September 18th, 2026, at 09:00 PM Pacific Daylight Time (PDT). BID OPENING: Monday, September 21st, 2026, at 10:00 AM Pacific Daylight Time (PDT). | 97% | Solicitation | 09/21/2026 |
Amendment 0002 - See attached Amendment 0002 - The purpose of this amendment is to incorporate clauses that were unintentionally removed by the Army Contract Writing System and to extend the bid submission date by 11 days from 11:00 A.M. Pacific on 19-NOV-2026 to 11:00 A.M. Pacific on 30-NOV-2026; the bid opening will occur at 1:00 P.M. on the date bids are due. Amendment 0001 - See attached Amendment 0001 and updated solicitation notice below for all details regarding the site visit date and link up location changes: The U.S. Army Corps of Engineer (USACE) Portland District is soliciting construction firms who are interested in submitting a competitive firm-fixed-price bid for this project. This solicitation announcement is for the repair and rehabilitation of two Tainter Valves (TV3 and TV4) at the John Day Lock and Dam (JDA). See the attached Solicitation, which includes the Specifications, and the attached Planset for all details. Because a similar requirement at The Dalles Lock and Dam will be solicited after this solicitation, the Government will host the following two site visits on Tuesday, 03 November 2026: 1. 9:00 A.M. @ John Day Dam (Oregon side), Exit 109 from I-84, John Day Dam Rd, Rufus, OR 97050. Check in with security at the front gate and then proceed to the parking lot across the road from the construction trailer; see the link up location map in the solicitation amendment notice. 2. 2:00 P.M. @ The Dalles Dam (Washington side), Lyle, WA 98635. Take US-197N and exit towards The Dalles Dam Boat Launch and park on the left hand side of the road immediately after turning left 90 degrees towards the Boat Launch; see the link up location map in the solicitation amendment notice. Contractors will be able to see a removed Tainter Valve at The Dalles Dam. Send an email to Andrew Sprys and Justin Figueredo by 11:00 A.M. on Wednesday, 28 October 2026, with the following information to register for the site visits: Solicitation Number: W9127N27BA009, Project Title: JOHN DAY DAM NAVIGATION LOCK TAINTER VALVE (TV) REPAIRS TV3 AND TV4, Name(s) of individual(s) attending site visit, Name of Company, Phone Number, Email Address, Are all individuals U.S. Citizens? Participants of the scheduled site visit must abide by the U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1, latest version) in accordance with Section 5, Personal Protective and Safety Equipment. It is the responsibility of the participants to wear personal protective and safety equipment as required by this regulation. Failure to comply could result in denial of access to site visit location. Site visit attendees must be U.S. citizens and possess a REAL ID to access the sites. Any subsequent visits will require prearrangement with the Contracting Division personnel listed above and may not be guaranteed/approved. Acceptable forms of proof of citizenship for anyone born outside the USA is: 1. US Birth Certificate: Must be certified and issued by either a US State or the US State Department. 2. US Passport Undamaged: Issued by the US Dept of State, without limitation, does not need to be current, is/was valid for 10 years for adults and 5 years for children under 16. 3. US Passport Card Undamaged: Issued by the US Dept of State, without limitation, does not need to be current. 4. US Certificate of Citizenship: Issued by US Citizenship and Immigration Service. 5. Consular Report of Birth Abroad: Issued by the US State Department. 6. US Naturalization Certificate: Issued by US Citizenship and Immigration Service. 7. Enhanced Drivers License: from Michigan, Minnesota, New York, Vermont, or Washington. Acceptable ID: 1. Real ID drivers license. 2. Enhanced drivers license. 3. Federal Identification Cards PIC/CAC/PIV/Etc. 4. Transportation Worker Identification Card (TWIC). 5. United States Passport or United States Passport Card. 6. Drivers license issued by the Department of State. Magnitude of Construction: The estimated cost of the project is between $1,000,000 to $5,000,000. Cybersecurity Maturity Model Certification (CMMC) level: The CMMC level anticipated for this requirement is CMMC Level 1 (Self). This CMMC level, or higher (see 32 CFR part 170), will be required prior to award and maintained for the duration of the contract for each contractor information system that will process, store, or transmit Federal contract information (FCI) or controlled unclassified information (CUI) during performance of the contract. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION EITHER BEFORE OR AFTER THE RESPONSE DATE AND TIME. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS SOLICITATION OR ANY FOLLOW-UP INFORMATION REQUESTS. | 93% | Solicitation | 11/30/2026 |
AWARD NOTICE: INVITATION FOR BID W9126G26BA010 for Joe Pool Dam Slide Repair at Joe Pool Lake, Texas. This announcement is a competitive small business set aside, firm-fixed price, Joe Pool Dam Slide Repair civil works construction services at Joe Pool Lake, Texas. The North American Industry Classification System code (NAICS) for this procurement is 237990-Other Heavy and Civil Engineering Construction which has a small business size standard of $45 Million. The Product Service Code is Z2PC-Repair or Alteration of Dams. Project Scope: The contractor shall repair four shallow slides (Slides 18, 20, 21, and 28) on the upstream and downstream dam embankment slopes. Work includes the removal of slide debris; excavation of the slide area with bench-cutting into the stable embankment and a keyway into the foundation toe; lime-treatment of excavated soil; placement and compaction of treated soil to restore original design contours; and final surface restoration with riprap on the upstream slope and topsoil with vegetation on the downstream slope. | 80% | Awarded | Open |
This announcement constitutes a Special Notice. This announcement seeks information from industry and will only be used for preliminary planning purposes. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SPECIAL NOTICE. Respondents will not be notified of the results of the evaluation. This is a SAVE-THE-DATE special notice for an industry day event on 07 December 2026 at 10:00 AM EST. All interested Offerors are required to access SAM.gov for future updates. Please view registration information and details below. The presentation slides and list of attendees will be made available and posted to the subject special notice on SAM.gov after the conclusion of the event. The U.S. Army Corps of Engineers, Jacksonville District will be holding an Industry Day event to gauge the interest, capabilities, and qualifications of various members of the Construction Community, to include Small Businesses. This event will provide information and obtain feedback from interested Offerors prior to issuance of the official solicitation. This requirement is for fiscal year (FY) 2027 award. NAICS Code 237990: Other Heavy and Civil Engineering Construction Small Business Standard: $45 million Price Target Range: $25 - $50 million Estimated Period of Performance: 730 calendar days Project Background Project Title: St. Lucie South Jetty Rehabilitation Interagency, Martin County, Florida. Project Description: The work consists of rehabilitation of the head structure of the South Jetty at St. Lucie Inlet. This includes a rebuilt rounded head structure and head-to-trunk transition with a marine mattress foundation and toe protection stones. Rehabilitation will require substantial moving and manipulation of both new and existing stones to obtain the required interlocking. The reworking of existing stones is only for incorporation of new stone. The retrieval of existing stone outside of the design template will not be required and is not part of the necessary rework of existing stone. The originally constructed South Jetty is approximately 1,320 feet in length with a crest height of 5.5 feet NAVD88. The crest width is 10 feet and the north and south slopes of the structure slope at 1V:2H. There is an asphalt walkway approximately 1,090 feet in length that runs along the existing jetty crest, terminating eastward at approximately Station 12+00 as shown on the approved permit drawings. Manipulation of stone along the crest may be necessary while completing the required work along the side slopes. The asphalt walkway will need to be removed within the repair area as necessary as work progresses. Any asphalt sections removed, or damaged such that they need to be removed, must be transported and properly disposed of off-site, and will not need to be replaced. Project Information Scope of Work: The proposed work includes rehabilitation of the head of the south jetty structure (the seaward-most 400 to 500 feet) by restabilizing the structure foundation and placing a second layer of large armor stone. The proposed scope includes: Excavating the existing bed material to place a widened marine mattress foundation, expanding the current structure footprint up to 85 feet on the jetty centerline as shown on the approved permit drawings; Placing 9- to 15-ton toe protection stones to form the structure foundation and provide scour protection; Removing and disposing of the remaining asphalt walkway and other debris off-site; Repairing the existing core and reworking the single layer of armor stone, as needed; and, Placing a second layer of 9- to 15-ton armor stone to stabilize the structure. Overview of Construction Staging and Access Requirements: Clearing of access routes and staging areas may be required. Any areas that are disturbed during construction are to be restored to pre-construction conditions or better once jetty rehabilitation work is completed. Expansion and/or improvements of access routes may be required. Maximum limits of access routes and staging areas are shown on the approved permit drawings. Additional Environmental Considerations: Construction will be permitted all year round and confined to daylight hours only. Construction that occurs during turtle and shorebird nesting seasons or has the potential to impact other Endangered Species Act (ESA) Protected Species, is subject to environmental restrictions and monitoring requirements. Refer to Table 1 under the Attachments for a list of protected species. Access from the water is allowed, but material cannot be dredged outside of the construction limits. All material excavated must pass through a 2-inch screen prior to use as backfill around the jetty structure or on the beach. All screened material must be disposed of off site. Excavated material may be used to build up the east staging area within the limits shown on the approved permit drawings. After jetty rehabilitation work is complete, the staging area must be graded to the beach fill template and native vegetation restored as shown on the approved permit drawings. Requests for Information: Industry is asked to consider the following questions and provide input at the Industry Day: Company/Contractor name, address, point of contact, phone number and e-mail address. Does the Contractor plan to submit a proposal for this contract? Describe the proposed construction methods and equipment needed to rehabilitate the jetty. Address, at a minimum, excavation of existing grade, maintaining open excavation areas, debris removal, and installation of marine mattresses and armor stone. Would temporary earth-retention or water-control measures, such as a cofferdam or similar system, be required to complete the work? Would dewatering be completed if this is the proposed construction methodology? If a cofferdam or other earth-retention system that also excludes all swimming ESA-listed species is not proposed, describe the measures that would be used to prevent the swimming ESA-listed species from entering the active work area during construction, including proposed turtle deterrent measures. ESA-listed species present in the area are included in Table 1 under the Attachments. Describe the turbidity control measures that would be incorporated into the proposed construction methodology. If it is not feasible, describe the limitation or restrictions for why not. What safety constraints or hazards could limit the practicality of potential construction methods? What temporary protections or operational measures would be needed to perform the work during winter months, given the inlet’s elevated coastal conditions during that period? Event Date: Monday, 07 December 2026 at 10:00 AM EST Event Location: 2401 SE Monterey Rd, Stuart, FL 34996 *Everyone will need to have a driver's license or id to get through security. Contact Info: Jim LaGrone, Project Manager James.W.Lagrone@usace.army.mil 904-521-2086 If you cannot attend in person: Link Meeting: https://www.microsoft.com/EN-US/MICROSOFT-TEAMS/JOIN-A-MEETING Meeting ID: 993 391 786 289 Passcode: kR3Zt9F8 Join by phone: 601-262-2433 Phone conference ID: 450 517 165# Event Schedule: Interested parties who consider themselves qualified to perform the above project are invited to submit a capabilities statement, a response to the questionnaire on this Special Notice and any questions you have for the Government ahead of the breakout session by no later than December 04, 2026, at 1:00 PM, EST. All responses under this Special Notice shall be sent via email to Nicole Batista-Cruz at Nicole.M.Batista-Cruz@usace.army.mil, and Ruth Rodriguez at ruth.c.rodriguez@usace.army.mill. Your email subject line should be addressed as "St. Lucie South Jetty Repair Industry Day Registration (Company Name) - W912EP-27-Z-1CUE " to ensure the request is handled in a timely manner. All interested parties who consider themselves qualified to perform the above project are also invited to request a breakout session with the Government on a first come, first serve basis with the following timeslots as follows: 1300-1330 1340-1410 1420-1450 1500-1530 1540-1610 1620-1650 NOTES: DO NOT SUBMIT PROPRIETARY AND/OR BUSINESS CONFIDENTIAL DATA. All responses to this Industry Day Special Notice will be evaluated and used in determining acquisition strategy. Prior Government contract work is not required for submitting a response under this Special Notice. NO REIMBURSEMENT WILL BE MADE FOR ANY COST ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO SAID NOTICE, ATTENDANCE TO THE INDUSTRY DAY EVENT OR ANY FOLLOW-UP INFORMATION SUBSEQUENTLY REQUESTED. You must be registered with the System for Award Management (SAM) in order to receive a Government contract award. To register, go to www.sam.gov. For additional information visit the website for the Federal Service Desk (www.FSD.gov) which supports SAM or contact them at 866-606-8220 for assistance. | 79% | Special Notice | 12/07/2026 |
Additional Details
Solicitation Number
W9127N18R0006
Archive Date
Jan 17, 2020
Office Address
PORTLAND, OR, 97204-3495