GovChime
Notice ID: 867ed4b20bef4bd899f0e9e29410b27aCombined Synopsis/Solicitation

Dredge Yaquina 26in Sheaves

Archived on June 15, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−07:00
Posted
May 16, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
333613: Mechanical Power Transmission Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W071 ENDIST PORTLAND
Place of performance
Portland, 97210
Last updated
Sep 25, 2026

Identifiers

Solicitation number
W9127N24Q0077
Notice ID
867ed4b20bef4bd899f0e9e29410b27a

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation W9127N24Q0077 for procurement of all labor, materials, equipment, and transportation to procure thirty-six (36) sheaves that are 26inches in diameter as per Drawing 5472527 in accordance with the attached product description. The following solicitation document, incorporated provisions, and clauses are in effect through Federal Acquisition Circular (FAC) 2023-06 effective 4 December 2023. This solicitation is advertised as a total small business set-aside under NAICS Code 333613, Sheaves, Mechanical Power Transmission, Manufacturing with a size standard of 750 employees. All prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov to be eligible for award. Lack of active SAM registration will make an offeror ineligible for award. The Portland District Contracting Office Small Business Specialist is Carol McIntyre at 503-808-4602. *Prices shall include any applicable taxes, fees, and delivery charges. Please complete the attached Price Table in the Combined Synopsis and provide with your quote submission.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:W9127N24Q0077
  1. Combined Synopsis
  1. Combined SynopsisCurrentMay 16, 2024

    Dredge Yaquina 26in Sheaves

    Notice 867ed4b20bef4bd899f0e9e29410b27a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Diesel Forklift. Load Capacity / Rated Load: 8,000-11,000 LBS . Load Distance, Center of Drive Axle to Fork: 22 in. Wheelbase: 78.7 in. Service Weight: 12,789 LBS. Fork Dimensions (hook type): 1.97 in. x 4.8 in. x 42 in. Axle Loading, Loaded Front/Rear: 17,978 / 2,526 LBS. Axle Loading, Unloaded Front/Rear: 5,787/7,002 LBS. Tires: Pneumatic (P), Solid (s), Non-marking (N). Lowered Mast Height H1: 88 in. Lift Height H3: 118.9 in. Extended Mast Height H4: 116.7 in. Overhead Guard Height (Cabin) H5: 87 (92) in. Overall Length I1: 164.6 in. Turning Radius Wa: 112.9 in. Smallest Pivot Pint Distance b13: 28 in. Engine Manufacturer Type: KUBOTA. Engine Power ACC to ISO 1585 : 85 hp/rpm. No. of Cylinder / Cubic Capacity: 4/3769 EA/cc. Type of Drive Control: Power shift 2/1. Service Brake: Hydraulic. Side Shift (Hook type). SEE ATTACHED SPEC SHEET.
-Combined Synopsis11/24/2026
Salient CharacteristicsRequired Product Characteristics, brand-name-or-equal as follows:The contractor shall furnish new, unused, commercially available steel mill products meeting the material specification/grade, product form, nominal dimensions, length, and quantity stated for each Contract Line-Item Number (CLIN).Furnished products shall be free from material defects that would affect their intended use. Used, reclaimed, repaired, remnant, or substitute-grade material is not acceptable.Dimensions are nominal. Unless a tighter tolerance is expressly stated in the CLIN, material shall conform to the standard commercial tolerances applicable to its governing material specification and product form.The offeror shall identify, by CLIN, the offered manufacturer or mill/distributor; material specification and grade; product form; nominal dimensions; and any exception to this purchase description. Any exception shall be clearly identified in the quotation.Substitution of a different material grade, product form, or smaller nominal dimension is not permitted without prior written authorization by the Contracting Officer.Documentation: The contractor shall provide a certificate of conformance identifying the material specification and grade for each CLIN. [Use this sentence only if the requiring activity has a documented need: The contractor shall also provide a mill test report traceable to the delivered heat/lot.]The offered products shall meet all of the following Government-validated salient characteristics:CLIN 0001 - Thin-section bearingReference item: Kaydon Bearings JG180XP0Quantity: 6 each.Furnish six (6) thin-section bearings, brand name or equal to Kaydon Bearings JG180XP0. Each offered bearing shall be new, current production, unused, and free from defects.Offerors proposing an equal product shall submit manufacturer datasheets and a completed compliance crosswalk demonstrating compliance with each salient characteristic.CLIN 0002 - Right-hand female rod endReference item: QA1 Precision CFR8T, described as [right hand Teflon female rod end,] same as CTFD-8Quantity: 3 each. Furnish three (3) self-lubricating female rod ends, right-hand thread, brand name or equal to QA1 Precision CFR8T / CTFD-8 reference configuration. Each unit shall be new and unused.Female rod-end configuration with right-hand threaded shank.Self-lubricating PTFE/Teflon-lined spherical bearing surface, or equivalent self-lubricating liner approved by the requiring activity.CLIN 0003 - Rod endReference item: QA1 Precision CMR8T, described as [rod end,] same as CTMD-8.Quantity: 3 each. Furnish three (3) rod ends, brand name or equal to QA1 Precision CMR8T / CTMD-8 reference configuration. Each unit shall be new and unused.CLIN 0004 - Retaining ringReference item: Rotor Clip SE-98, described as [STZD RET RING].Quantity: 6 each. Furnish six (6) standardized retaining rings, brand name or equal to Rotor Clip SE-98 reference configuration. Each retaining ring shall be new and unused.CLIN 0005 - Roller chainReference item: Diamond Chain DMD-60-1R, 100-foot roll including master link.Quantity: 600 feet. Furnish six hundred (600) feet of single-strand roller chain, supplied in 100-foot rolls, with one compatible master/connecting link included with each roll; brand name or equal to Diamond Chain DMD-60-1R reference configuration. Chain shall be new, unused, and suitable for the Governments identified equipment/application.Single-strand roller-chain configuration.Nominal chain series/size: No. 60 or Government-approved equivalent dimensional series.Master/connecting link shall match the offered chain series and shall not reduce the stated load rating.Supplied lengths shall be continuous 100-foot rolls; no substituted partial lengths unless specifically authorized by the CO.CLIN 0006 - Stainless-steel swivel jointReference item: OPW 3750-0151, described as [1-1/2 inch NPT, SS swivel joint.]Quantity: 6 each. Furnish six (6) stainless-steel swivel joints, brand name or equal to OPW 3750-0151 reference configuration. Each swivel joint shall be new, unused, and complete with all components required for installation.Nominal connection size: 1-1/2 inch NPT.Product identification and technical compliance. Offerors shall identify the manufacturer, manufacturer part number, country of origin when required by the solicitation, and place of manufacture when required. For an offered equal product, the offeror shall provide manufacturer technical literature and a completed compliance crosswalk addressing each salient characteristic.Government review. Failure to provide sufficient information to establish compliance with all salient characteristics may render the quotation ineligible for award.Condition. Supplies shall be new, current production, and free from defects; used, refurbished, remanufactured, surplus, gray-market, or counterfeit items are not acceptable unless expressly authorized in writing by the solicitation.Inspection and acceptance. The Government will inspect supplies for quantity, condition, identity, documentation, and conformance with the solicitations stated characteristics. The Governments acceptance is not waived by a vendors commercial terms or disclaimers.
-Combined Synopsis11/13/2026
Proposed procurement for NSN 3040014176191 CYLINDER ASSEMBLY,ACTU: Line 0001 Qty 199 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0490 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0120 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
Proposed procurement for NSN 3040010511524 SHAFT,SHOULDERED: Line 0001 Qty 60 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0211 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
Proposed procurement for NSN 3040009828221 CONNECTING LINK,RIGID: Line 0001 Qty 16 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0341 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026

Additional Details

Solicitation Number

W9127N24Q0077

Archive Date

Jun 15, 2024

Office Address

PORTLAND, OR, 97204-3495