GovChime
Notice ID: 7f8b657321194b7c87f0c814b30bc8a9Award NoticeAwardedArchived

Inspection and Repair of the Machine Shop Overhead Crane Rails

Awarded on September 15, 2026. The description is published on SAM.gov: Full description on SAM.gov.

Awarded tounder W9127N26PA113 (source: SAM.gov award notice)• $11.8K

Overview

Posted
September 16, 2026
Notice type
Award Notice
Set-aside
Small Business Set Aside - Total
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION NORTHWESTERN.ENDIST PORTLAND.W071 ENDIST PORTLAND
Place of performance
Portland, Oregon
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov
Award date
Sep 15, 2026
Award amount (SAM.gov award notice)
$11.8K

Identifiers

Solicitation number
W9127N26PA113
Notice ID
7f8b657321194b7c87f0c814b30bc8a9
Award number (PIID)
W9127N26PA113

Description

No description in the SAM.gov data feed for this notice.

Full description on SAM.gov

Award Overview

Award Number

W9127N26PA113

Award Amount (SAM.gov award notice)

$11.8K

Award Date

Sep 15, 2026

Awardee

Awardee UEI

QC24N4TVBE98

Awardee CAGE Code

19CR5

Awardee Address

Milwaukie, OR 97267, UNITED STATES

Line Item Number

0001

Original Solicitation

Notice ID: 7f8b657321194b7c87f0c814b30bc8a9

Posted Date: Sep 16, 2026

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (8)

  • 267001_US Moorings Beam Inspection_Inspection Report.pdf

    8.3 MBAdded in Solicitation version 4Posted
    Download
  • Solicitation Amendment W9127N26QA1120001 SF 30.pdf

    3.8 MBAdded in Solicitation version 4Posted
    Download
  • Solicitation Amendment - W9127N26QA1120001.pdf

    3.2 MBAdded in Solicitation version 4Posted
    Download
  • KoneCranes RT7576 16 Inch Wheel and Locating Collar.pdf

    219 KBAdded in Solicitation version 4Posted
    Download
  • PWS_Crane Rails Repair_Amendment 0001.pdf

    164 KBAdded in Solicitation version 4Posted
    Download
  • Army Corps Machine Shop Crane Rail Wear Sep 18 2025.pdf

    15 KBAdded in Solicitation version 4Posted
    Download
  • Service Contract Act WD 2015-5563.pdf

    73 KBAdded in Solicitation version 1Posted
    Download
  • PWS_Crane Rails Repair_2026.06.18.pdf

    164 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 3
    Version 3SolicitationArchived

    Inspection and Repair of the Machine Shop Overhead Crane Rails

    Notice 9ef41eaff83a41f5a78555b5d41193ed on SAM.gov

  2. 5
    Version 5Award NoticeArchivedCurrent

    Type changed from Solicitation to Award Notice

    Inspection and Repair of the Machine Shop Overhead Crane Rails

    Notice 7f8b657321194b7c87f0c814b30bc8a9 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
-Combined Synopsis11/13/2026
Hammar Spreader Beam
-Combined Synopsis11/12/2026
Hoist Stand
-Combined Synopsis09/24/2026
High Performance ELIMINATOR
-Combined Synopsis08/06/2026
Outdoor Motorized Gantry Crane
-Combined Synopsis07/07/2026

Additional Details

Solicitation Number

W9127N26PA113

Archive Date

Sep 30, 2026

Office Address

PORTLAND, OR, 97204-3495