Z--United States Army Corps of Engineers, Little Rock District, 700 West Capitol Avenue, Little Rock, Arkansas 72203, Dardanelle Power House, Yell County, Arkansas
Awarded on April 8, 2011. Full description on SAM.gov.
Overview
- Posted
- April 8, 2011
- Notice type
- Award Notice
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W076 ENDIST LITTLE ROCK
- Place of performance
- USACE District, Little Rock 700 West Capitol, Room 7315 Little Rock AR 72201 US
- PSC
- Z: MAINT, REPAIR, ALTER REAL PROPERTY
- Last updated
- Dec 5, 2025
- Award date
- Apr 8, 2011
- Award amount (SAM.gov award notice)
- $1.9M
Identifiers
- Solicitation number
- W9127S11R0001
- Notice ID
- 111b1b221f71a3b73517e28ad0c9719c
- Award number (PIID)
- W9127S-11-C-0005
Description
Award Overview
Award Number
W9127S-11-C-0005
Award Amount (SAM.gov award notice)
$1.9M
Award Date
Apr 8, 2011
Awardee
Awardee UEI
Q89TUUQ8N5R3
Original Solicitation
Notice ID: 111b1b221f71a3b73517e28ad0c9719c
Posted Date: Apr 8, 2011
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
W9127S11R0001- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- 3×Pre-SolicitationNov 1, 2010
Z--United States Army Corps of Engineers, Little Rock District, 700 West Capitol Avenue, Little Rock, Arkansas 72203, Dardanelle Power Plant, Pope and Yell County, Arkansas.
- SolicitationJan 20, 2011
Z--United States Army Corps of Engineers, Little Rock District, 700 West Capitol Avenue, Little Rock, Arkansas 72203, Dardanelle Power Plant, Pope and Yell County, Arkansas.
- AwardedCurrentApr 8, 2011
Z--United States Army Corps of Engineers, Little Rock District, 700 West Capitol Avenue, Little Rock, Arkansas 72203, Dardanelle Power House, Yell County, Arkansas
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The U.S. Army Corps of Engineers - New England District is issuing a Solicitation Notice for Dike B Generator Installation, Mansfield Hollow Dam, Mansfield Center, CT. THE WORK CONSISTS OF: The Contractor shall furnish all necessary materials, equipment, and labor required to construct and commission a new power system for the Dike B Operator unit. The scope of work involves comprehensive site preparation to support the construction of a reinforced concrete generator pad and the installation of secure perimeter fencing. The Contractor is responsible for the procurement and installation of a standalone, propane-powered generator and a corresponding propane fuel storage tanks. Following the physical installation, the Contractor shall execute all final electrical connections and integration into the existing sluice gate operator unit and control panel. All work shall comply with all applicable federal laws and codes, and shall be completed in accordance with the Statement of Work. This procurement is set-aside for small business vendors. The applicable NAICS code is 238290 with a Small Business Size Standard of $22 Million. ALL VENDORS MUST HAVE AN ACTIVE REGISTRATION IN SAM.GOV AT THE TIME OF SUBMISSION IN ORDER TO BE CONSIDERED. ANY VENDOR THAT DOES NOT HAVE AN ACTIVE SAM.GOV REGISTRATION WILL BE REJECTED AS NON RESPONSIVE. | 56% | Solicitation | 11/18/2026 |
The U.S. Army Corps of Engineers, New England District is issuing this Sources Sought Announcement for Construction Services for the replacing the wire ropes and designated associated sheave blocks for the number 1 service gate of the dam at the Franklin Falls Dam in Franklin NH. This announcement is to determine interest, availability and capability of 8(a), HUBZone, Service-Disabled Veteran-Owned, Women-Owned and Small Business concerns for this project. The NAICS code for this procurement is 237990 with a size standard of $22M. The project is planned to be solicited in the Spring of 2027 with construction to begin place in the Spring/Summer of 2027. The estimated construction cost is between $350,000 - $500,000. The project site is the inlet culvert on the lake side of the Franklin Falls Dam in Franklin, NH. Work for this project will likely include, but not be limited to, the following: Replace the existing stainless steel wire ropes that operate the number 1 service gate. Wire ropes must meet the following conditions: Meet US Steel Manufacture Requirements. Shall be 1,085 linear feet of 1” X 6X26 GALV XIP IWRC RRL PLAIN ENDS. The wire rope shall have a minimum breaking strength of 100 tons. The wire rope shall be lubed during the time of manufacture with accepted lubrication. Specification sections 35 01 70.13 and 35 20 16.53 will be included in the solicitation. Wire rope clips and thimbles will be designed by the contractor for this project and must fully conform with ASME B30 standards and proper amount of clips shall be provided for wire rope size and requirements for proper wire rope turnback. Remove and replace the lower sheave block assembly (five total) that is associated with the number 1 service gate. The following will be applicable for these assemblies: Sheave pins and bushings. Site plates, hitch plates, keeper plates Tap bolts, pipe separator and bolts Hitch pins Finishes and paint Contractors shall install the wire ropes and lower sheave blocks according to appropriate industry standards for Load Handling Equipment of this type and configuration. Interested firms should submit a capabilities package to include the following: business classification (i.e. HUBZone, small business, etc.), as well as qualifications and experience in performing the work components stated above. Please include at least two specific examples of the firm’s experience performing the work requirements stated above. The projects must have been performed within the last seven years. Please indicate the team subcontractor(s) (if any), including their prior experience and qualifications, which will be used to support the offeror’s effort, and their experience must also have been performed within the last seven years. Proof of bonding capability is required. Responses are limited to twenty pages. Responses are due by 25 November 2026 at 1:00 PM Eastern. Responses should be emailed to: Distephano Marcellus – Distephano.Marcellus@usace.army.mil Phone Contact: (978) 318-8890 Interested firms shall provide the above documentation in one original form and one copy. The Government will not pay for any material provided in response to this market survey nor return the data provided. This notice is for information purposes only and is not a request to be placed on a solicitation mailing list nor is it a Request for Proposal (RFP) or an announcement of a solicitation. The results of this survey will be considered to be in effect for a period of one year from the date of this notice. Government Agency URL: www.nae.usace.army.mil Government Agency URL Description: New England District, Corps of Engineers | 56% | Market Research | 11/25/2026 |
This acquisition is for a a non-personal services contract to provide facility maintenance services and certain related facility management services at Fort Hood to include operation, preventative maintenance (PM) and corrective maintenance (CM) service (M and S) for approximately 136 automatic doors, 3,375 overhead doors (some hangers), and commercial doors for preventative and corrective (on demand) maintenance at the Fort Hood Army Installation, Fort Hood, Texas. This requirement also includes certain facility management and support services, as defined in this PWS, at US Army Garrison Fort Hood. The Contractor shall provide required PM and (CM) services in compliance with all code; criteria; regulations; and Federal, State, and local laws. All work shall be performed at Fort Hood, Texas, which consists of the Main Cantonment, West Fort Hood, and all areas under the control of Fort Hoods Installation or Installation considered Real Property. AMENDMENT 1: The purpose of amendment 1 is to incorporate site visit information detail. Location: FT Hood, TX. Date: 6 August 2026 Time: 1:30 PM CST. Attachments enclosed. AMENDMENT 2: Extend proposal due date to 14 August 2026, 1:00 PM CST (Posted to GPE/Sam.gov on 7 Aug 2026). AMENDMENT 3: The purpose of amendment 3 is to incorporate revised documents. Please see the updated Solicitation Amendment 3 for details. AMENDMENT 4: The purpose of amendment 4 is to communicate revisions to the evaluation factors detailed in RFO 52.212-2, Evaluation-Commercial Products and Commercial Services. (Deviation 2026-O0038). Please see updated solicitation attachment: Solicitation Amendment 4_W912DY26RA0760001_12 Aug. | 56% | Awarded | Open |
CSS Project #99178 - Install Facility Lightning Protection System in Morgantown, WV (WV029) | 56% | Solicitation | 09/23/2026 |
As of 18 August 2026: Amendment 0001 posted to respond to contractor RFis. The New York District Army Corps of Engineers intends to award a contract for a Request for Proposal for the Design and Installation of 3M Fall Protection Systems Davit Arm and Detent Anchors at AFO. The Project has four main requirements:(a) Engineering Assessment and Design The contractor will be required to evaluate the required installation sites for fall protection equipment and develop a Design Document to appropriately install the equipment.(b) Install Government Furnished Equipment (GFE) The Government will provide the fall protection equipment to be installed. The contractor will provide 3M certified installers and install the equipment per the design.(c) Testing and Inspection The contractor will test and inspect all installed equipment to ensure it will function as intended.(d) End User Training The contractor will provide a training session for AFO employees that will use and maintain the equipment. Offerors should be regularly engaged in the business of installing fall protection systems and be able to provide 3M Certified Installers. | 56% | Solicitation | 08/31/2026 |
Additional Details
Solicitation Number
W9127S11R0001
Archive Date
May 8, 2011