Notice ID: 5eefced2b75f4c54a5386897b79110dbCombined Synopsis/Solicitation
Re-babbitt Guide Bearing
Archived on August 20, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−05:00
- Posted
- July 26, 2024
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 333613: Mechanical Power Transmission Equipment Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W076 ENDIST LITTLE ROCK
- Place of performance
- Ozark, AR, 72949
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W9127S24Q0025
- Notice ID
- 5eefced2b75f4c54a5386897b79110db
Description
Vendor shall provide transportation of damaged guide bearing from Ozark Powerhouse 1204 Aux Arc Park Rd Ozark, AR 72949 to their facility to be repaired. When Vendor receives the bearing, they will perform as-found measurements on the bearing and the damaged Babbitt on the face of the bearing. Then they will remove the damaged babbitt from the bearing face. They will then repair the bearing mating surface that the babbitt is placed on and adheres to during the repair. When the bearing is ready for the babbitt, the babbitt will be heated and melted down so that it can be poured onto the face of the bearing to the strict tolerances provided to that company by USACE Engineers. When the repair / pour is complete, they will dress the babbitt for use, make final completed repaired measurements of the new babbitt face of the bearing, to include the physical dimensions of the new babbitt and the bearing shell it is joined to, and then send those measurements to the USACE Engineers for sign off. After Sign Off, it will be accepted, the bearing will be shipped back to the Ozark Power Plant in a wooden Crate or similar. We will then notify you that the bearing was received so you can close the project out.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W9127S24Q0025- Combined Synopsis
- Combined SynopsisCurrentJul 26, 2024
Re-babbitt Guide Bearing
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The purpose of this requirement is to repair, refurbish, inspect, machine, and test Government-furnished bearing components and a thrust runner for the Folsom Powerplant hydrogenerators, Units 1, 2, and 3. | 68% | Combined Synopsis | 11/19/2026 |
Salient CharacteristicsRequired Product Characteristics, brand-name-or-equal as follows:The contractor shall furnish new, unused, commercially available steel mill products meeting the material specification/grade, product form, nominal dimensions, length, and quantity stated for each Contract Line-Item Number (CLIN).Furnished products shall be free from material defects that would affect their intended use. Used, reclaimed, repaired, remnant, or substitute-grade material is not acceptable.Dimensions are nominal. Unless a tighter tolerance is expressly stated in the CLIN, material shall conform to the standard commercial tolerances applicable to its governing material specification and product form.The offeror shall identify, by CLIN, the offered manufacturer or mill/distributor; material specification and grade; product form; nominal dimensions; and any exception to this purchase description. Any exception shall be clearly identified in the quotation.Substitution of a different material grade, product form, or smaller nominal dimension is not permitted without prior written authorization by the Contracting Officer.Documentation: The contractor shall provide a certificate of conformance identifying the material specification and grade for each CLIN. [Use this sentence only if the requiring activity has a documented need: The contractor shall also provide a mill test report traceable to the delivered heat/lot.]The offered products shall meet all of the following Government-validated salient characteristics:CLIN 0001 - Thin-section bearingReference item: Kaydon Bearings JG180XP0Quantity: 6 each.Furnish six (6) thin-section bearings, brand name or equal to Kaydon Bearings JG180XP0. Each offered bearing shall be new, current production, unused, and free from defects.Offerors proposing an equal product shall submit manufacturer datasheets and a completed compliance crosswalk demonstrating compliance with each salient characteristic.CLIN 0002 - Right-hand female rod endReference item: QA1 Precision CFR8T, described as [right hand Teflon female rod end,] same as CTFD-8Quantity: 3 each. Furnish three (3) self-lubricating female rod ends, right-hand thread, brand name or equal to QA1 Precision CFR8T / CTFD-8 reference configuration. Each unit shall be new and unused.Female rod-end configuration with right-hand threaded shank.Self-lubricating PTFE/Teflon-lined spherical bearing surface, or equivalent self-lubricating liner approved by the requiring activity.CLIN 0003 - Rod endReference item: QA1 Precision CMR8T, described as [rod end,] same as CTMD-8.Quantity: 3 each. Furnish three (3) rod ends, brand name or equal to QA1 Precision CMR8T / CTMD-8 reference configuration. Each unit shall be new and unused.CLIN 0004 - Retaining ringReference item: Rotor Clip SE-98, described as [STZD RET RING].Quantity: 6 each. Furnish six (6) standardized retaining rings, brand name or equal to Rotor Clip SE-98 reference configuration. Each retaining ring shall be new and unused.CLIN 0005 - Roller chainReference item: Diamond Chain DMD-60-1R, 100-foot roll including master link.Quantity: 600 feet. Furnish six hundred (600) feet of single-strand roller chain, supplied in 100-foot rolls, with one compatible master/connecting link included with each roll; brand name or equal to Diamond Chain DMD-60-1R reference configuration. Chain shall be new, unused, and suitable for the Governments identified equipment/application.Single-strand roller-chain configuration.Nominal chain series/size: No. 60 or Government-approved equivalent dimensional series.Master/connecting link shall match the offered chain series and shall not reduce the stated load rating.Supplied lengths shall be continuous 100-foot rolls; no substituted partial lengths unless specifically authorized by the CO.CLIN 0006 - Stainless-steel swivel jointReference item: OPW 3750-0151, described as [1-1/2 inch NPT, SS swivel joint.]Quantity: 6 each. Furnish six (6) stainless-steel swivel joints, brand name or equal to OPW 3750-0151 reference configuration. Each swivel joint shall be new, unused, and complete with all components required for installation.Nominal connection size: 1-1/2 inch NPT.Product identification and technical compliance. Offerors shall identify the manufacturer, manufacturer part number, country of origin when required by the solicitation, and place of manufacture when required. For an offered equal product, the offeror shall provide manufacturer technical literature and a completed compliance crosswalk addressing each salient characteristic.Government review. Failure to provide sufficient information to establish compliance with all salient characteristics may render the quotation ineligible for award.Condition. Supplies shall be new, current production, and free from defects; used, refurbished, remanufactured, surplus, gray-market, or counterfeit items are not acceptable unless expressly authorized in writing by the solicitation.Inspection and acceptance. The Government will inspect supplies for quantity, condition, identity, documentation, and conformance with the solicitations stated characteristics. The Governments acceptance is not waived by a vendors commercial terms or disclaimers. | 67% | Combined Synopsis | 11/13/2026 |
Login at https://piee.eb.mil and search for 'N6449826R0547' to obtain more details.* | 43% | Solicitation | 12/03/2026 |
Diesel Forklift. Load Capacity / Rated Load: 8,000-11,000 LBS . Load Distance, Center of Drive Axle to Fork: 22 in. Wheelbase: 78.7 in. Service Weight: 12,789 LBS. Fork Dimensions (hook type): 1.97 in. x 4.8 in. x 42 in. Axle Loading, Loaded Front/Rear: 17,978 / 2,526 LBS. Axle Loading, Unloaded Front/Rear: 5,787/7,002 LBS. Tires: Pneumatic (P), Solid (s), Non-marking (N). Lowered Mast Height H1: 88 in. Lift Height H3: 118.9 in. Extended Mast Height H4: 116.7 in. Overhead Guard Height (Cabin) H5: 87 (92) in. Overall Length I1: 164.6 in. Turning Radius Wa: 112.9 in. Smallest Pivot Pint Distance b13: 28 in. Engine Manufacturer Type: KUBOTA. Engine Power ACC to ISO 1585 : 85 hp/rpm. No. of Cylinder / Cubic Capacity: 4/3769 EA/cc. Type of Drive Control: Power shift 2/1. Service Brake: Hydraulic. Side Shift (Hook type). SEE ATTACHED SPEC SHEET. | 42% | Combined Synopsis | 11/24/2026 |
39% | Awarded | Open |
Additional Details
Solicitation Number
W9127S24Q0025
Archive Date
Aug 20, 2024
Office Address
LITTLE ROCK, AR, 72201-3225