Notice ID: a2e44071e37541eda5c5d292b1802310Solicitation
Crane Maintenance and Repair SATOC
Archived on August 1, 2022. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM UTC−05:00
- Posted
- May 2, 2022
- Notice type
- Solicitation
- NAICS
- 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W071 ENDIST OMAHA
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W9128F22Q0058
- Notice ID
- a2e44071e37541eda5c5d292b1802310
Description
The Government intends to award one Indefinite Delivery/Indefinite Quantity contract as part of a Single Award Task Order Contract (SATOC) for Special Maintenance and Repair Services for Cranes, Hoists, and Lifting Devices in support of the USACE, Omaha District, Kansas City District and their respective customers, to the offeror submitting a proposal determined to be most advantageous to the Government; price, and other factors considered General scope of services will be for the maintenance, repair, installation, testing and inspection marking of various types of crane and hoist equipment at federal facilities. Some projects may involve working over or near water. Due to the nature of some of the repairs, the contractor will be required to be on site within 48 hours of issuance of task orders that are deemed emergency repairs or within 10 days of issuance of the task order for non-emergency repairs.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Rachael M. Taylor
Secondary Contact
Jessica R. Jackson
Documents
No documents available.
Lifecycle
Solicitation:
W9128F22Q0058- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- SolicitationCurrentMay 2, 2022
Crane Maintenance and Repair SATOC
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation: proposals are being requested, and a written solicitation will not be issued. This combined synopsis/solicitation, and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06 Dated 27 August 2025. This is set-aside for small business with the NAICS code of 811310, size standard $12,500,000.00. Non-personal services contract to conduct diagnostic inspections of kitchen equipment at the attached locations for operability and service status, to include minor preventative maintenance tasks.This update is being posted to fix a typo in the combined synopsis. It originally stated to only provide a quote for CLIN 0001, but has now been corrected. Please provide a quote for all CLINs. Thank you!Closing date has been updated to 1/13/2026 @ 1100 CST | - | Combined Synopsis | 01/13/2026 |
REBUILD (1) CUMMINS NT855M DIESEL ENGINE AND TWIN DISC CLUTCH | - | Solicitation | 11/17/2026 |
This is a SOURCES SOUGHT and is for informational/market research purposes only. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION. The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining the category of Small Business Set-Aside. The proposed North American Industry Classification System (NAICS) Code is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, which has a corresponding Size Standard of $12.5 million dollars. The 125 Fighter Wing, Florida Air National Guard, Jacksonville, FL is seeking sources to perform 12-year hydrostatic testing, recharge, or repairs on 33 Each Amerex model 600k, 150lb Halon Fire Extinguishers. The Contractor shall provide documentation that they are EPA approved Section 608 technician certified under 40 CFR Part 82, Subpart F and meet the specific requirements of Subpart H for halon emissions reduction. Responses to this sources sought notice must be submitted electronically (via email). Please return the attached Sources Sought Cover Sheet with your email response. A contractor’s response to this Sources Sought shall be limited to the information sheet and five (5) additional pages of information for past performance or experience which may help in market research for industry capacity and shall include the following information: 1. Contractor’s name, address, point of contact, phone number, email address and CAGE code. 2. Contractor’s small business category and business size: Small Business, Small Disadvantaged, 8(a) firm, Historically underutilized Business Zones (HUBZone), Economically Disadvantaged Women-Owned Small Business (EDWOSB), and Service- Disabled Veteran-Owned Small business(SDVOSB). 3. Provide a maximum of two examples of projects similar in size, scope, and complexity with a brief description of each project, customer name, contract number, and the dollar value. Projects considered similar in scope to this project include a variety of field support requirements for the same projects simultaneously. 4. Provide additional relevant information on the contractor’s experience/capabilities as it pertains to the proposed work outlined. DISCLAIMER: This notice does not obligate the Government to award a contract. No reimbursement will be made for any costs associated with providing information in response to this Sources Sought or any follow up information. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s qualification to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or to provide feedback to respondents with respect to any information submitted. After a review of the responses a solicitation may be published on www.SAM.gov. However, responses to this notice will be considered adequate to a solicitation. All interested partied must be registered in the System for Award Management (SAM) at https://www.sam.gov and remain current for the duration of the contract to be eligible for award of a Government contract. | - | Market Research | 11/13/2026 |
This Sources Sought Posting is being issued in accordance with Revolutionary Federal Acquisition Regulation (FAR) Overhaul (RFO) Part 10, Market Research. The purpose of this posting is to gain knowledge of potential sources for this service including interested Small Business Concerns. Its sole purpose is to provide information for planning and market research only and shall not be construed as either a solicitation or obligation on the part of the Government. The Government welcomes responses from all interested parties; however, no decision or award of contract will be made based on responses from industry. The Government will not pay for the preparation of, nor the subsequent use of, information submitted in response to this Sources Sought. Respondents will not be notified of the outcome of the Government’s review of the information received. Additionally, the Government does not intend to hold discussions concerning this Sources Sought with any interested parties but reserves the right to contact vendors if additional information is required for clarifications as it pertains to the Sources Sought. The 129th Rescue Wing at Moffett ANGB, CA, requires the provision of monthly, quarterly, and annual preventative maintenance and inspection services for two Delta Scientific DSC501 wedge barriers, one hydraulic pumping unit, and associated equipment in accordance with the attached draft Performance Work Statement. The scope is expected to include utility verification; site verification and layout; clearing, grubbing, and limited demolition; excavation and earthwork; export and disposal of excavated soil; irrigation modification; construction of an oval/elliptical concrete display pad; aircraft support features; anchoring/mooring features; static grounding; evaluation and installation of lightning-protection measures; solar-powered perimeter lighting; grading and stormwater drainage improvements; and landscape restoration of disturbed areas. The NAICS code for this requirement is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The Small Business Administration size standard for small businesses in this industry is $12,500,000. Instructions to Vendors All interested concerns will submit a written notice, not to exceed five (5) pages, stating the concern’s positive intention to submit a proposal as a prime contractor no later than the deadline posted with this notice. Responses to this Sources Sought should include the following information: A positive statement of intent to submit a proposal as a prime contractor, A listing of projects completed during the past five (5) years for both Government and private industry. The list should provide the type of service, dollar value, contract number, location, and point of contact. Also, please indicate whether the firm was a prime or subcontractor—if the firm was a subcontractor, please provide a point of contact with the prime contractor, A brief outline of resources, subcontractors, and key personnel that would be used to accomplish the contract, and Demonstration of the firm’s socioeconomic status (i.e., SB, 8(a), HUBZone, EDWOSB, WOSB, SDVOSB, etc.), and size. If adequate small business firms are not available for adequate competition for this project, it may be advertised as an unrestricted solicitation. Submit responses directly to austin.breault.1@us.af.mil; telephone calls and facsimile responses will not be honored. Please reference the Notice ID and project title in the subject of your message. Please limit your responses to standard documents (i.e., Microsoft Office, Adobe PDF, etc.). Do not send compressed (i.e., .zip or .exe extension) or other file types as they will be stripped from your message. | - | Market Research | 11/16/2026 |
1. General. This is a SOURCES SOUGHT for John Day Below-the-Hook Lifting Devices Repair and Recertification (Commercial Services Contract) and is for informational/market research purposes only. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION. This Sources Sought is to gain knowledge of the interest, capabilities, and qualifications of industry so the government can make informed business decisions. We are seeking responses from both large and small business members of industry to include: Small Business, Small Disadvantaged Businesses to include 8(a) firms, Historically Underutilized Business Zones (HUBZone), Woman-Owned Small Business (WOSB) to include Economically Disadvantaged Women-Owned Small Business (EDWOSB), Service-Disabled Veteran-Owned Small business (SDVOSB) and Veteran Owned Small Business (VOSB). All interested parties are highly encouraged to respond. Reponses to this Sources Sought announcement will be used by the Government to make business decisions and to inform potential future solicitations. The North American Industrial Classification Code (NAICS) for this requirement is: 811310 – Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. PSC is J039 — Maintenance, Repair, and Rebuilding of Equipment—Materials Handling Equipment. The related size standard is: $12.5 Million Formal Sources Sought Response Due – November 19, 2026 at 200PM PT. Number and Type of Contracts: NWP contemplates awarding one (1) firm fixed priced, commercial service contract. 2. Project Background. The Government conducted visual and non-destructive testing inspections on several Below-the-Hook lifting devices at the powerhouse at John Day Dam in Rufus, Oregon. These inspections were performed from January 26 to January 28, 2026, in accordance with AWS D1.1 2025 and ASTM E709 standards. The goal was to assess the structural integrity of the powerhouse’s overhead lifting devices. The Government inspection yielded several cracks in five lifting devices and removed them from service. 3. Project Scope. The scope of this project involves the comprehensive inspection, repair, and re-certification of existing Below-the-Hook (BTH) lifting devices for the John Day Dam powerhouse bridge crane identified in the inspection report. Cracks were found in the following lifting devices: 1 - 590 Ton Spreader Beam 2 - 310 Ton Spreader Beams 1 - Lifting Device for Main & Intermediate Shafts, 1 - Lifting Device for the Runner at the Contractor’s facility. The work required, but is not limited to: Transport: Transfer of devices to off site Contractor shop for repair and load testing. Inspection and Inventory: Creating a complete inventory and performing non-destructive examination (NDE) on all lifting devices and their components before any repairs. Weld Repair: Repairing approximately 55 inches of known weld defects in structural penetration welds. Removal of Defect Fabrication Welds: Removal of fabrication or tack welds with defects. Load Testing: Load testing the devices at 125% of their rated capacity, followed by additional non-destructive examination. Finishing and Documentation: Stripping and repainting the devices, providing new nameplates and safety labels. Delivery: Delivering the fully repaired, tested, and certified lifting devices back to the John Day Powerhouse. The repairs should follow AWS D1.1 and ASTM E709 methods and inspection standards to correct the identified deficiencies and restore the equipment to safe operational standards. The Government will assist the loading and unloading of the lifting devices to and from the Contractor’s truck using the powerhouse gantry crane. The Contractor will abate and remove lead paint at the cracks and spot repaint with a government approved paint system. 4. Submission Instructions. Formal responses to this Sources Sought notice must be submitted electronically (via email) with SUBJECT: Sources Sought – JD Overhead Lifting Devices Repair. Please email to Scarlett Millman, Contracting Specialist, at Scarlett.J.Millman@usace.army.mil and Nicole Adams, Contracting Officer, at nicole.a.adams@usace.army.mil, before November 19, 2026 at 1200PM PT. Interested parties’ responses to this Sources Sought shall be limited to four (4) pages and shall include the following information: Firm's name, address, point of contact, phone number, e-mail address, CAGE and Unique Entity ID. Firm's business category and size: Large Business (include summary of small business participation metrics), Small Business, Small Disadvantaged Businesses to include 8(a) firms, Historically Underutilized Business Zones (HUBZone), Woman-Owned Small Business (WOSB) to include Economically Disadvantaged Women-Owned Small Business (EDWOSB), Service-Disabled Veteran-Owned Small business (SDVOSB) and at the subcontracting level, Veteran Owned Small Business (VOSB). An explanation of the prime firm’s capabilities, special qualifications/certifications and equipment and describe the work to be self-performed as it pertains to the proposed work outlined in the Project Scope. A description of work performed for similar projects, with consideration to the size of the lifting devices, potential lead paint, meeting the special qualifications required for this effort, and working on a federal contract. To be considered for a potential set aside or sole source strategy, it is recommended contractors provide a minimum of one (1) and maximum of three (3) projects similar to the project. These project examples should be similar in size, scope and complexity to the work described in the Project Scope Section of this notice. Provide a description of each project (to include pertinent qualitative and quantitative information about featured scope elements), and include the following: Project Title Contract Number Contract award date Customer name, phone number and email address Prime or Subcontractor Initial contract dollar value Final contract dollar value Initial contract completion date Final contract completion date Customer satisfaction Firm's Joint Venture information if applicable - existing and potential. Firm's interest and the likelihood in bidding on the solicitation when it is issued. (Refer to planned advertisement and performance dates) Recommendation on pricing and payment for the Welding portion of the contract (numerous Options, T&M CLINs, etc.) 5. Disclaimer and Important Notes. a. This notice does not obligate the Government to award a contract. No reimbursement will be made for any costs associated with providing information in response to this Sources Sought or any follow up information. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization's capabilities to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or to provide feedback to respondents with respect to any information submitted. b. All interested firms must be registered in the System for Award Management (SAM) at https://www.sam.gov to have size status considered. You must remain current for the duration of the source selection process to be eligible for award of a Government contract. | - | Market Research | 11/19/2026 |
Additional Details
Solicitation Number
W9128F22Q0058
Archive Date
Aug 1, 2022
Office Address
OMAHA, NE, 68102-4901