GovChime
Notice ID: 20b226fa58da45a9aad0bc96d4f002e3Solicitation

Whittier Narrows Dam Safety Modification Project

Archived on May 31, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−05:00
Posted
May 31, 2024
Notice type
Solicitation
NAICS
237990: Other Heavy and Civil Engineering Construction
Agency
Department of WarDepartment of the Army

Notice details

Office
W076 ENDIST TULSA
Place of performance
Pico Rivera, 90660
Last updated
Dec 6, 2025

Identifiers

Solicitation number
W912BV23R0039
Notice ID
20b226fa58da45a9aad0bc96d4f002e3

Description

Project Title: Whittier Narrows Dam Safety Modification Project. This solicitation and resulting contract are utilizing the Best Value Trade-off process in accordance with (IAW) FAR Part 15. This acquisition uses the Integrated Design and Construction (IDaC) delivery method. The NAICS Code for this project 237990, Other Heavy and Civil Engineering Construction. The size standard is $45,000,000.00. IAW DFARS 236.204, the magnitude of this project is between $250,000,000.00 and $500,000,000.00. This acquisition is solicited using full and open competition. The Government point of contact for this solicitation is Ryan Kelly, Ryan.J.Kelly@usace.army.mil. Amendment 0001 is issued to schedule a pre-proposal conference on 31 January 2024 and to change the date projnet will close for new inquiries. Amendment 0002 is issued to remove CLIN Note Number 3 in its entirety. Amendment 0003 is issued to extend the proposal due date to 12 June 2024, extend the bidder inquiry cutoff date to 22 April 2024, and to change the location and start time of the site visit on 28 February 2024.Amendment 0004 is issued to schedule a second site visit for 25 April 2024 at 9:00AM PST, Update Section 00 22 00, Update Specification Sections 01 11 00, 01 13 00, 01 57 19, 31 00 00, and 35 31 19, and provide CAD files for the project. Amendment 0005 is issued to update the start time of the site visit on 25 April to 8:00AM PST, and extend the date Projnet will close for new inquiries to 22 May 2024. Amendment 0006 is issued to update Section 00 10 00 CLIN Schedule, Update Section 00 22 00, Remove FAR Clauses 52.216-5 and 52.216-6, Update Specification Sections, Provide Poplink 100% Plans, Provide Reservoir Data Report, Provide Water Control Manuals, and Provide Whittier Narrows Emergency Action Plan. Amendment 0007 is issued to update the Cost Breakdown, update Section 00 22 00, update Wage Determination CA20240022, and update Section 01 22 00.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W912BV23R0039
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationJan 16, 2024

    Whittier Narrows Dam Safety Modification Project

    Notice dac0fe9d938e43309e794bdeee0f4f6e on SAM.gov

  2. 3×
    SolicitationJan 18, 2024

    Whittier Narrows Dam Safety Modification Project

    Notice e720425025584ae58288df8d383c5eb4 on SAM.gov

  3. Pre-SolicitationFeb 2, 2024

    Whittier Narrows Dam Safety Modification Project

    Notice 179307336f95449aa5355af3928569bc on SAM.gov

  4. 11×
    SolicitationCurrentFeb 14, 2024

    Whittier Narrows Dam Safety Modification Project

    Notice 20b226fa58da45a9aad0bc96d4f002e3 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Northwest Division Powerhouse Life Safety Upgrades Stage 1 The U.S. Army Corps of Engineers (USACE), Walla Walla District, intends to issue a single-phase solicitation on or about 30 November 2026 for a Construction Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple-Award Task Order Contract (MATOC). The anticipated MATOC will provide construction services for renovation and upgrade projects at hydroelectric powerhouses located at large, remote civil works projects within the Northwestern Division. The primary area of performance is anticipated to include USACE Walla Walla District projects at McNary, Ice Harbor, Lower Monumental, Little Goose, Lower Granite, and Dworshak. Task orders may also include work at other USACE projects within the Pacific Northwest, including locations within the Seattle and Portland Districts in Washington, Oregon, Idaho, and Montana. The U.S. Army Corps of Engineers, Walla Walla District, anticipates awarding up to four (4) IDIQ MATOCs. At least one, and up to two, MATOCs will be reserved for award to qualified small business concerns. Task orders issued under the MATOCs will be firm-fixed-price. The aggregate shared contract capacity for all awarded MATOCs is anticipated to be $99 million. Each contract is anticipated to include a 36-month base period and two (2) 24-month option periods, exercisable at the Governments discretion. The Government may issue individual task orders with values up to $25,000,000. The Government reserves the right to issue additional solicitations and award additional contracts for the same or similar work within the geographic area covered by the MATOCs. The applicable North American Industry Classification System (NAICS) code is 237990, Other Heavy and Civil Engineering Construction. This notice is for informational purposes only and is not a solicitation. The solicitation is anticipated to be issued on or about 30 November 2026. Summary Scope of Work: The purpose of this IDIQ MATOC is to provide construction services to renovate and upgrade life-safety systems at large hydroelectric powerhouses located at large, remote civil works projects. These powerhouses may range in size from 75,000 square feet to 420,000 square feet and from 5 stories to 11 stories. The work may consist of the following major industrial construction elements for installation and/or modification: 1. Fire detection and mass notification alarm systems 2. Wet pipe, fine water mist, and clean agent sprinkler fire suppression system(s) 3. Smoke control system, including stair pressurization fans, smoke exhaust fans, motorized fire-smoke dampers, and complex logic and programming matrix digital controls 4. HVAC direct digital controls 5. HVAC ventilation and conditioning equipment, dampers, and ductwork 6. Fabricated steel stairs and guardrails 7. Architectural fire barrier walls, fire doors, safety glazing and finishes 8. Firestopping 9. Emergency and exit lighting systems 10. Electrical power supply and distribution 11. Precast concrete 12. Low-slope roofing 13. Specific aspects of this project that may be especially challenging include: a. Robust industrial safety protocols with rigorous lockout tagout procedures b. Construction in a continuously operating industrial environment c. Proximity to high voltage equipment and transmission lines d. Multiple underground levels with limited access e. Fire alarm designers and installers must be NICET Level III or IV certified f. Work in ceilings up to 60 feet high The project will involve the development and management of Contractor furnished submittals for items such as shop drawings, product data, commissioning plans, and contract close-out documentation as required by technical specifications of the task orders. Miscellaneous work within the project includes the delivery of Record Drawings. Placement of Task Orders. The actual amount of work to be performed and the time of such performance will be determined by a Contracting Officer who will issue written task orders. Prices will be requested and evaluated for each task order in accordance with FAR 16.505. The Government will evaluate price and past performance at a minimum but may include additional non-price factors. Each RFP will state the method of selection and any additional non-price factors. Whenever possible, award will be made without discussions. If discussions are required, each contractor included in the competitive range will be requested to provide a final proposal revision, unless eliminated from discussions. Important Note: The sam.gov response date listed elsewhere in this synopsis is for the sam.gov archive purposes only. It has no relationship to the actual proposal submission date. The proposal submission date will be contained in the solicitation and any solicitation amendments that are issued. When issued, the solicitation documents for this project will be available via sam.gov. No CDs OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the document(s) posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to sam.gov and add the solicitation to your watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the Add Me To Interested Vendors button in the listing for this solicitation on sam.gov.
77%
Pre-Solicitation01/08/2027
Amendment 0004 adds Provision 52.228-1 (Bid Guarantee) and extends the Solicitation close date to Friday 23 October 2026 at 14:00 CST. Amendment 0003 is posted to allow Offerors ample time to review responses to Projnet questions Offers are due on or before 14:00 October 20, 2026. Amendment 0002 is posted to identify minor changes to the statement of work (SOW) and to move the submission date to, on or before, 13 October 2026 at 2:00 P.M. CST. Posted changes are identified in the SOW v3 dtd 09/30/26 in red font and the submission date change is to provide vendors appropriate time to make applicable adjustments to submissions. The site visit attendee list is also provided in this amendment. Solicitation for the repair, reconstruction, and modernization of the Damsite Park wastewater lagoons at Fall River Lake. The objective is to restore structural integrity, prevent environmental seepage, and ensure full compliance with USACE and State of Kansas environmental regulations at Fall River Lake and Dam in Fall River, Kansas. U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a commercial contract from solicitation W912BV26Q95 for the Damsite Park Lagoon Repair. The North American Industrial Classification System (NAICS) Code is 237990. The resulting contract will be issued on a Firm-Fixed Price basis, to the responsible offeror whose quote is conforming to the requirements of the solicitation and will be most advantageous to the Government considering price, past performance, and conformance with sub-contracting regulations. The anticipated award date is on or about 15 October 2026. The solicitation will be issued via Internet on the PIEE website at https://piee.eb.mil/. It is the responsibility of the contractor to monitor the above-listed internet address for any posted changes. All amendments posted shall be signed and submitted with the quote. Quotes are anticipated to be due on or before 13 October 2026 by 2:00 PM Central Time (CST). Contractors must have an active registration in the System for Award Management (SAM) at time of quote in order to receive a government contract award. SAM registration must also be active at time of award in order to receive a government contract award. SAM registrations shall remain active throughout contract performance to comply with the annual representations and certifications requirements. To register, the SAM.gov Internet address is: https://sam.gov/. Please NOTE this solicitation requires offerors to enter a National Institute of Standards and Technology (NIST) score in the Supplier Performance Risk System (SPRS). The NIST score is a responsibility item. Those without a NIST score will be deemed NON-RESPONSIBLE and will not be eligible for award. QUESTIONS AND INQUIRIES BIDDERS INQUIRY Any questions and inquiries related to this solicitation shall be submitted through Bidders Inquiry. Please visit www.projnet.org to submit your inquiries. The Solicitation Number is: W912BV26QA095 The Bidder Inquiry Key is: WFTAEB-RREB2U The Bidder Inquiry System is anticipated to be unavailable for new inquiries after 2:00 p.m. on 08 October 2026 to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.
77%
Solicitation10/20/2026
This is a SOURCES SOUGHT SYNOPSIS and is not a solicitation announcement. The purpose of this Market Research and Sources Sought Notice is to gain knowledge of potential qualified Small Business, HUBZone, 8(a), Service Disabled Veteran owned, and Women owned Small Business firms. Responses to this Sources Sought Synopsis will be used by the government in making appropriate acquisition decisions. The intended work falls under NAICS code 237990, Other Heavy and Civil Engineering Construction. The U.S. Army Corps of Engineers, Mobile District, anticipates a requirement for a firm-fixed-price construction contract to perform structural concrete and gate repairs on the spillway at the Carters Reregulation Dam located in Chatsworth, Georgia. The purpose of this project is to perform concrete rehabilitation and retrofit existing structural elements that have been impacted by concrete expansion due to Alkali-Silica Reactivity (ASR). The scope of work includes, but is not limited to: structural concrete demolition of existing pier stoplog slots; installation of new steel stoplog guides and embedded seal plates; placement of specialized shrinkage-compensating concrete; and recessing of side seal plates. Additional mechanical and structural work includes replacing side and bottom seals on four (4) Tainter gates and replacing seals on eight (8) stop logs. The contractor will be fully responsible for the design, fabrication, and installation of Temporary Dewatering Structures (TDS)/cofferdams and temporary gate support shoring. To maintain operational continuity, construction must be executed sequentially, allowing only one gate bay to be dewatered and out of service at any given time. The estimated magnitude of construction is between $5,000,000 and $10,000,000, with an anticipated performance period of approximately 180 calendar days. Responses are requested with the following information, which shall not exceed a total of eight pages. 1. Offeror name, address, points of contact with telephone numbers and e-mail addresses. 2. Business size/classification to include any designations as Small Business, 8(a), HUBZone, Service Disabled Veteran Owned and Women-Owned Small Businesses shall be indicated on first page of submission. 3. Bonding capability: construction bonding level per single contract and aggregate construction bonding level, both expressed in dollars; along with current available bonding capacity. 4. Description of your capability to perform the specialized work described above, manage subcontractors, secure and comply with environmental permits, and safely execute Dam and hydraulic Steel structures (HSS) construction. Specifically address your capacity and proposed approach to designing, fabricating, and installing Temporary Dewatering Structures (TDS) and tainter gate shoring systems. 5. Past performance and experience on up to three (3) projects of similar scope, complexity, and value completed within the past five (5) years, or at least 50% construction complete. Relevant experience includes: structural concrete demolition, specialized concrete placement (such as shrinkage-compensating concrete under strict curing/testing protocols), stainless steel structural embed/guide fabrication and welding, Tainter gate seal replacement, and work with USACE Hydraulic Steel Structures within the civil works branch. For each project, provide the title, location, general description of the scope, contract value, role (Prime or Subcontractor), and client contact information (name, phone, and email). NO RESPONSES WILL BE ACCEPTED BY FAX OR MAIL. ALL RESPONSES MUST BE E-MAILED to: Jeffrey M. Donaldson at Jeffrey.M.Donaldson@usace.army.mil. Submittals are due no later than 20 October 2026 at 2:00 PM CDT. Telephonic responses will not be honored. This is not a Request for Proposal, only a Request for Information. No award will result from this Sources Sought. This notice does not constitute any commitment by the Government.
75%
Market Research10/20/2026
* Bid Abstract uploaded September 21, 2026. * Amendment 0003 - The purpose of this amendment is to make the following changes to the solicitation: SOLICITATION CLOSING DATE The solicitation closing date is hereby extended from Friday, September 18, 2026, at 9:00 PM Pacific Daylight Time (PDT) to Monday, September 21, 2026, at 9:00 AM Pacific Daylight Time (PDT). NEW SOLICITATION CLOSING DATE: Monday, September 21, 2026, at 9:00 AM Pacific Daylight Time (PDT) BID OPENING The bid opening will be conducted on Monday, September 21, 2026, at 10:00 AM Pacific Daylight Time (PDT). Bids received prior to the solicitation closing date and time will be secured and opened at the date and time specified above. Will send TEAMs link once BID is received. *Amendment 0002 - The purpose of this amendment is to make the following changes to the solicitation: 1. Extend the Solicitation Closing Date: The solicitation closing date is hereby extended by one week, from September 11, 2026, to September 18, 2026. 2. Clarify Bidder Inquiry Deadline: The bidder inquiry provision is revised from: No response will be posted to inquiries after Close of Business on the seventh business day preceding the solicitation due date to: The deadline for submission of bidder inquiries is Close of Business on the seventh business day preceding the solicitation due date. Inquiries received after this deadline may not be answered. 3. Add Pertinent Documents/Attachments: The following six (6) documents/attachments are hereby added to the solicitation: A9 - Work Space Access Trailer and Parking Location, A10 - Pump Access, A11 - Propeller Condition, A12 - JDA Fish Pump rehab drawings, A13 - SouthFishwayPumps_OandM Manual, A14 - SouthFishTurbine-Unit3_OandM Manual (all documents previously designated as CUI have been downgraded) 4. Remove Attachment: Attachment AMD0002_Technical Sections.pdf is hereby removed from the solicitation. 5. Revise Specifications: The following revisions are hereby incorporated into the solicitation specifications: File Section Changes Specifications 15 00 00.03 25 Paragraph 1.4.2 is revised to change pump shaft assembly and propeller assembly to vertical shaft assembly. Paragraph 2.1.2 is revised to change pumpshaft to pump propeller. Specifications 01 10 10.00 25 Paragraph 1.6.b is amended to extend the outage window through June 30, 2028.Specifications 09 97 02.00 25 Paragraph 3.5 is amended to include the extension shaft in the painting schedule. All other terms and conditions of the solicitation remain unchanged.*Amendment 0001 - The purpose of this amendment is to extend the solicitation closing date by two weeks from August 28, 2026 to September 11, 2026. All other terms and conditions of the solicitation remain unchanged. PROJECT TITLE: JOHN DAY FISH PUMP REHABILITATION PROJECT LOCATION: JOHN DAY LOCK AND DAM, RUFUS, OR DESCRIPTION: REMOVAL, REFURBISHMENT, AND REPLACEMENT OF MAJOR COMPONENTS OF FISH PUMP UNIT 1, INCLUDING BUT NOT LIMITED TO SHAFTS, BEARINGS, BEARING BRACKETS, AND RIGHT-ANGLE DRIVE GEARBOXES. MAGNITUDE OF CONSTRUCTION: BETWEEN $5,000,000 - $10,000,000 NAICS: 237990 OTHER HEAVY AND CIVIL ENGINEERING CONSTRUCTION SIZE STANDARD: $45,000,000 SOCIO-ECONOMIC CONSIDERATIONS: TOTAL SMALL BUSINESS SET-ASIDE Bid Opening: Monday, September 21st, 2026, at 10:00 AM Pacific Daylight Time (PDT). Will send TEAMs link once BID is received. Due to CMMC access requirements, in order to gain access to CUI attachments, please verify your organization has a minimum CMMC Level 1 Self verification and submit your CMMC Unique Identifier Number and CAGE Code via email to joseph.b.jarvis@usace.army.mil and cory.r.pfenning@usace.army.mil. BIDS DUE: Friday, September 18th, 2026, at 09:00 PM Pacific Daylight Time (PDT). BID OPENING: Monday, September 21st, 2026, at 10:00 AM Pacific Daylight Time (PDT).
75%
Solicitation09/21/2026
Dashields Locks and Dam Install 4 Corner Hydraulics Dashields Locks and Dam, Coraopolis, PennsylvaniaThe Dashields hydraulic system upgrade consists of demolition and removal of the existing hydraulic system and its related components, and installation of a new hydraulic system with supporting controls and buildings.Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete must be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Nine (9) new hydraulic cylinders must be furnished by the contractor and five (5) will be furnished by the government. Electrical demolition work must include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe.Three (3) new hydraulic power units (HPUs) must be furnished and installed on the land and middle lock walls inside two new 2-story HPU buildings at locations specified on the contract drawings. The fourth HPU will be furnished and installed on an elevated platform in the river wall at the location specified in the contract drawings. The HPU buildings and elevated platform must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contract drawings. The HPUs must send hydraulic power to the existing hydraulic cylinders by means of new stainless-steel piping and new manifold mounted hydraulic components.The new hydraulic equipment must be operated by new electronic controls that will be installed inside new panels and new control consoles. The new control panels must be installed on each HPU with an additional control panel inside of the middle wall operations building. The new control consoles must be installed inside three existing and one new 1-story control shelter at locations specified in the contract drawings. The control shelter must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contractdrawings.New buckets and supporting equipment must be installed inside existing motor control centers (MCCs). New hardware and power and control cabling must be installed as specified and as required for operation of the new electrical/mechanical equipment. Some concrete installation work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe. A geotechnical and civil site analysis must be completed to confirm the structural integrity of all foundations for all new project components and to confirm proper drainage. Minimal new steel grating must be required for placement over top new concrete utility trenches. All new hydraulic and controls equipment must be tested and commissioned prior to project handoff. This project is to be completed at a locks and dam site along the Ohio River and thus requires the use of a floating work plant and work boat(s) for construction. Also, all as-built drawings must be stamped by a registered PE.The work shall be completed within 730 after written Notice to Proceed.The acquisition will be procured as 100% Set-Aside for Small Business. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Offerors are encouraged to participate. The Request for Proposal (RFP) will be issued on or about 18 June 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored.The North American Industrial Classification System (NAICS) Code for this acquisition is 237990 - 0ther Heavy and Civil Engineering Construction.The Small Business Size Standard for this NAICS Code is $45,000,000.00.In order to submit an Offer on this project, your company must-1) Be registered in System for Award Management (SAM) and maintain an active registration status. 2) Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) RegistrationRegistering in SAM.gov includes both entity validation and entity registration.To register in SAM:a. Navigate to SAM.govb. Select Sign-In (top right)c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In.e. Under the Entity Management widget, Select Get Started button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned.For Additional Information on SAMTo Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations.Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions.PLEASE NOTEIt is mandatory that all companies be registered in SAM in order to receive federal contracts.There is no charge to register or maintain your company (entity) registration.Login.gov manages usernames and passwords for SAM.gov. *Important* Registration InformationRegistration can take at least ten (10) business days to be active in SAM.gov.Registration must be in active status upon offer submission and remain active during award period.Registration must be renewed every 365 days to remain active.The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ETProcurement Integrated Enterprise Environment (PIEE) Solicitation Module RegistrationTo register for PIEE follow the below instructions. Register in PIEE:a. Navigate to https://piee.eb.mil/b. Select Register [top right]c. Select Vendord. Create a User ID and Password and follow the prompts [next]e. Create Security Questions [next]f. Complete your User Profile Information [next]g. Complete your Supervisor or Approving Official Information [next]h. Complete Rolesi. Step 1. Select SOL-Solicitationii. Step 2. Select Proposal Manageriii. Step 3. Click Add Rolesiv. Step 4. Fill in your Location Code (CAGE Code) [next]i. Provide a justification for your registration [next]j. Follow the remaining prompts to submit your registrationThe Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance. 30 June 2026 - Amendment 0001 issued. 23 July 2026 - Amendment 0002 Issued 31 July 2026 - Amendment 0003 issued. 13 August 2026 - Amendment 0004 issued.
75%
Solicitation08/20/2026

Additional Details

Solicitation Number

W912BV23R0039

Archive Date

May 31, 2025

Office Address

TULSA, OK, 74137-4290