GovChime
Notice ID: 15cd6d9d0e274dd8b5eb5b19ecc7c267Solicitation

Transmission Kit; NSN: 2520-01-682-2226

Archived on October 24, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM EDT
Posted
October 6, 2026
Notice type
Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
333613: Mechanical Power Transmission Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-DTA.W6QK ACC- DTA
Place of performance
Warren, Michigan
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W912CH-26-B-A011
Notice ID
15cd6d9d0e274dd8b5eb5b19ecc7c267

Description

Invitation for Bid Solicitation W912CH-26-B-A011 - Transmision Kit

Solicitation Amendment 0002 issued 22 September 2026 (see attached)

Solicitation Amendment 0001 ussed 21 September 2026 (see attached)

A signed Solicitation,  signed Amendment 0001, and signed Amendment 0002 must be submitted by the response date of 09 October 2026 in order for your bid to be accecpted. 

Invitation for Bids

1.  The attached Invitation for Bids (IFB) is intended to result in the award of a single five-year Firm-Fixed-Price Indefinite-Delivery Indefinite-Quantity contract for the Transmission Kit, National Stock Number: 2520-01-682-2226, Part Number: 12591930.  Quantities are as follows:

     First Ordering Year:  225 EA (Estimated)
     Second Ordering Year: 225 EA (Estimated) 
     Third Ordering Year: 225 EA (Estimated)
     Fourth Ordering Year: 225 EA (Estimated)
     Fifth Ordering Year: 225 EA (Estimated)

     Five-Year Minimum: 9 EA
     Five-Year Maximum: 1,125 EA

Note: Only the five-year minimum quantity is guaranteed.

2.  This procurement is being competed as a SMALL BUSINESS SET-ASIDE.

3.  There is a Technical Data Package (TDP) associated with this procurement.  The TDP is distribution statement "D", which limits access to Department of War (DoW) and U.S. DoW contractors only.  Please see Section C.1 for instructions on how to access this technical data.  Bidders must be granted TDP access prior to submitting a bid or the bid submission will be rejected.

4.  Bidders are advised to carefully read and understand the entire IFB, including Sections L and M, prior to submitting a bid for evaluation.  The Government will evaluate bids without discussions/negotiations and does not assume the duty to search for data to cure problems it finds in any bid.  Therefore, all information necessary for the review and evaluation of a bid is to be contained within the bid submission.

5.  Bidders must complete all necessary fill-ins and representations throughout the IFB.  Failure to complete all required fill-ins and representations may result in the rejection of a bid.

6.  Bidders shall acknowledge receipt of all IFB amendments by the date and time indicated for receipt of bids.  If the IFB is amended, all terms and conditions not modified remain unchanged.  Please see Section A.5 and RFO 52.214-3: Acknowledgement of Amendments for additional information.

7.  All questions pertaining to the IFB shall be submitted via email to the following personnel by Friday, 25-Sep-2026 at 1:00 p.m. local time (Warren, MI):

 Kerri E. Ginter
CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL
EMAIL: kerri.e.ginter.civ@army.mil


-and-


Martina R. Zook
CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL
EMAIL: martina.r.zook.civ@army.mil

Responses will be furnished via a Q&A log posting to SAM.gov or as an IFB amendment, if the information is necessary in submitting bids or if the lack thereof would be prejudicial to other prospective Bidders.  Please see RFO 52.214-6: Explanation to Prospective Bidders for additional information.  The Government will review all questions received but is not obligated to answer questions submitted after the date/time noted above, prior to IFB close.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (8)

  • QA_Transmission Kit.xlsx

    11 KBAdded in Solicitation version 8Posted
    Download
  • Solicitation - W912CH26BA011.pdf

    5.3 MBAdded in Solicitation version 6Posted
    Download
  • Solicitation Amendment W912CH26BA0110002 SF 30.pdf

    3.8 MBAdded in Solicitation version 6Posted
    Download
  • Solicitation Amendment W912CH26BA0110001 SF 30.pdf

    3.8 MBAdded in Solicitation version 6Posted
    Download
  • First-Article-Waiver-Worksheet.pdf

    593 KBAdded in Solicitation version 5Posted
    Download
  • Special Packaging Instructions_AK16822226.pdf

    187 KBAdded in Solicitation version 4Posted
    Requires SAM.gov sign-in
  • Technical Data Package (TDP)_12591930.zip

    213 MBAdded in Solicitation version 4Posted
    Requires SAM.gov sign-in
  • Contract Data Requirement List (CDRL).docx

    33 KBAdded in Solicitation version 4Posted
    Download

Lifecycle

  1. 3
    Version 3PresolicitationArchived

    Transmission Kit; NSN: 2520-01-682-2226

    Notice 1273b9d28108461e96a5b1627f2329fb on SAM.gov

  2. 4
    Version 4Solicitation

    Type changed from Presolicitation to Solicitation

    Transmission Kit; NSN: 2520-01-682-2226

    Notice cedfe1fe54e14b31a8c97cf587533a17 on SAM.gov

  3. 5
    Version 5Solicitation

    Transmission Kit; NSN: 2520-01-682-2226

    Notice 5678c48462d043a087882c50ee16495f on SAM.gov

  4. 6
    Version 6Solicitation

    Transmission Kit; NSN: 2520-01-682-2226

    Notice 9a02ab8ba99e4c8f9b28c8a952ab7806 on SAM.gov

  5. 7
    Version 7Solicitation

    Transmission Kit; NSN: 2520-01-682-2226

    Notice 339022b9462c483ab59130995cc97fa7 on SAM.gov

  6. 8
    Version 8SolicitationCurrent

    Transmission Kit; NSN: 2520-01-682-2226

    Notice 15cd6d9d0e274dd8b5eb5b19ecc7c267 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
NOUN: RING ASSEMBLY,HANGING Basic Quantity: 21 Ea. Option Quantity: 21 Ea. NSN: 2520013283433 MPN: 12321990 LEVEL OF PACKAGING: MILLITARY PRESERVATION: B THIS IS 100% SMALL BUSINESS SET ASIDE
-Solicitation06/01/2026
PRE-SOLICITATION NOTICE: THIS SOLICITATION IS EXPECTED TO RESULT IN A FIRM FIXED PRICE CONTRACT WITH ONE, 1-YEAR, 100% OPTION. Item: Cylinder Assembly NSN: 3040-01-476-0514 Base Qty: 23 EA Option Qty: 23 EA Part Number (CAGE: 1QME2): AT154865 FOB Point: Destination Inspection/Acceptance Points: Origin/Origin Packaging: Military A with Special Packaging Instructions See Solicitation for additional information, which is to be posted to SAM in approximately two weeks from this presolicitation notice.
-Pre-Solicitation11/09/2026
Diesel Forklift. Load Capacity / Rated Load: 8,000-11,000 LBS . Load Distance, Center of Drive Axle to Fork: 22 in. Wheelbase: 78.7 in. Service Weight: 12,789 LBS. Fork Dimensions (hook type): 1.97 in. x 4.8 in. x 42 in. Axle Loading, Loaded Front/Rear: 17,978 / 2,526 LBS. Axle Loading, Unloaded Front/Rear: 5,787/7,002 LBS. Tires: Pneumatic (P), Solid (s), Non-marking (N). Lowered Mast Height H1: 88 in. Lift Height H3: 118.9 in. Extended Mast Height H4: 116.7 in. Overhead Guard Height (Cabin) H5: 87 (92) in. Overall Length I1: 164.6 in. Turning Radius Wa: 112.9 in. Smallest Pivot Pint Distance b13: 28 in. Engine Manufacturer Type: KUBOTA. Engine Power ACC to ISO 1585 : 85 hp/rpm. No. of Cylinder / Cubic Capacity: 4/3769 EA/cc. Type of Drive Control: Power shift 2/1. Service Brake: Hydraulic. Side Shift (Hook type). SEE ATTACHED SPEC SHEET.
-Combined Synopsis11/24/2026
Salient CharacteristicsRequired Product Characteristics, brand-name-or-equal as follows:The contractor shall furnish new, unused, commercially available steel mill products meeting the material specification/grade, product form, nominal dimensions, length, and quantity stated for each Contract Line-Item Number (CLIN).Furnished products shall be free from material defects that would affect their intended use. Used, reclaimed, repaired, remnant, or substitute-grade material is not acceptable.Dimensions are nominal. Unless a tighter tolerance is expressly stated in the CLIN, material shall conform to the standard commercial tolerances applicable to its governing material specification and product form.The offeror shall identify, by CLIN, the offered manufacturer or mill/distributor; material specification and grade; product form; nominal dimensions; and any exception to this purchase description. Any exception shall be clearly identified in the quotation.Substitution of a different material grade, product form, or smaller nominal dimension is not permitted without prior written authorization by the Contracting Officer.Documentation: The contractor shall provide a certificate of conformance identifying the material specification and grade for each CLIN. [Use this sentence only if the requiring activity has a documented need: The contractor shall also provide a mill test report traceable to the delivered heat/lot.]The offered products shall meet all of the following Government-validated salient characteristics:CLIN 0001 - Thin-section bearingReference item: Kaydon Bearings JG180XP0Quantity: 6 each.Furnish six (6) thin-section bearings, brand name or equal to Kaydon Bearings JG180XP0. Each offered bearing shall be new, current production, unused, and free from defects.Offerors proposing an equal product shall submit manufacturer datasheets and a completed compliance crosswalk demonstrating compliance with each salient characteristic.CLIN 0002 - Right-hand female rod endReference item: QA1 Precision CFR8T, described as [right hand Teflon female rod end,] same as CTFD-8Quantity: 3 each. Furnish three (3) self-lubricating female rod ends, right-hand thread, brand name or equal to QA1 Precision CFR8T / CTFD-8 reference configuration. Each unit shall be new and unused.Female rod-end configuration with right-hand threaded shank.Self-lubricating PTFE/Teflon-lined spherical bearing surface, or equivalent self-lubricating liner approved by the requiring activity.CLIN 0003 - Rod endReference item: QA1 Precision CMR8T, described as [rod end,] same as CTMD-8.Quantity: 3 each. Furnish three (3) rod ends, brand name or equal to QA1 Precision CMR8T / CTMD-8 reference configuration. Each unit shall be new and unused.CLIN 0004 - Retaining ringReference item: Rotor Clip SE-98, described as [STZD RET RING].Quantity: 6 each. Furnish six (6) standardized retaining rings, brand name or equal to Rotor Clip SE-98 reference configuration. Each retaining ring shall be new and unused.CLIN 0005 - Roller chainReference item: Diamond Chain DMD-60-1R, 100-foot roll including master link.Quantity: 600 feet. Furnish six hundred (600) feet of single-strand roller chain, supplied in 100-foot rolls, with one compatible master/connecting link included with each roll; brand name or equal to Diamond Chain DMD-60-1R reference configuration. Chain shall be new, unused, and suitable for the Governments identified equipment/application.Single-strand roller-chain configuration.Nominal chain series/size: No. 60 or Government-approved equivalent dimensional series.Master/connecting link shall match the offered chain series and shall not reduce the stated load rating.Supplied lengths shall be continuous 100-foot rolls; no substituted partial lengths unless specifically authorized by the CO.CLIN 0006 - Stainless-steel swivel jointReference item: OPW 3750-0151, described as [1-1/2 inch NPT, SS swivel joint.]Quantity: 6 each. Furnish six (6) stainless-steel swivel joints, brand name or equal to OPW 3750-0151 reference configuration. Each swivel joint shall be new, unused, and complete with all components required for installation.Nominal connection size: 1-1/2 inch NPT.Product identification and technical compliance. Offerors shall identify the manufacturer, manufacturer part number, country of origin when required by the solicitation, and place of manufacture when required. For an offered equal product, the offeror shall provide manufacturer technical literature and a completed compliance crosswalk addressing each salient characteristic.Government review. Failure to provide sufficient information to establish compliance with all salient characteristics may render the quotation ineligible for award.Condition. Supplies shall be new, current production, and free from defects; used, refurbished, remanufactured, surplus, gray-market, or counterfeit items are not acceptable unless expressly authorized in writing by the solicitation.Inspection and acceptance. The Government will inspect supplies for quantity, condition, identity, documentation, and conformance with the solicitations stated characteristics. The Governments acceptance is not waived by a vendors commercial terms or disclaimers.
-Combined Synopsis11/13/2026
THIS IS A PRE-SOLICITATION NOTICE / SYNOPSIS This procurement is for HAND PUMP ASSEMBLY This proposed solicitation is intended to result in the award of a Firm-Fixed Price type Contract for the supplies specified with a one year buying option. The Government does not intend to use FAR Part 12 for the acquisition. Procurement is 100% Small Business Set-Aside. Noun: HAND PUMP ASSEMBLY NSN: 4320-01-201-0814 P/N: 9338160 Notes: We expect to post the solicitation in 2 to 4 weeks. Technical Data Package: A link to the TDP will be available when the solicitation is released. The TDP is EXPORT CONTROLLED, Distribution D Joint Certification Program (EXPORT CONTROL): You must be certified under the United States/Canada Joint Certification / Program (JCP) (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center. "CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. NOTICE TO ALL CONTRACTORS: All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System for Award Management (SAM). You may register via the Internet at https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. Further information may be obtained through the internet at: https://www.sam.gov/SAM/pages/public/loginFAQ.jsf
-Pre-Solicitation11/17/2026

Additional Details

Solicitation Number

W912CH-26-B-A011

Archive Date

Oct 24, 2026

Office Address

WARREN, MI, 48397-5000