Notice ID: 39a8d143df484892be77fecf61eda031Award NoticeAwardedArchived

Award Notice, Adapter, Housing, NSN: 3040-01-531-4475

Awarded on February 11, 2026. Full description on SAM.gov.

Awarded tounder W912CH-26-C-0025 (source: SAM.gov award notice)• $408.0K

Overview

Posted: February 12, 2026
Notice type: Award Notice
Set-aside: Total Small Business Set-Aside (FAR 19.5)
NAICS: 333613: Mechanical Power Transmission Equipment Manufacturing
Agency: Department of WarDepartment of the Army

Notice details

Office: AMC.ACC.ACC-CTRS.ACC-DTA.W6QK ACC- DTA
PSC: 3040: MISCELLANEOUS POWER TRANSMISSION EQUIPMENT
Last updated: Nov 3, 2026
First published: February 12, 2026 3:40 PM UTC
Last updated on SAM.gov: February 27, 2026 5:04 AM UTC
Award date: Feb 11, 2026
Award amount (SAM.gov award notice): $408.0K

Identifiers

Solicitation number: W912CH-26-C-0025
Notice ID: 39a8d143df484892be77fecf61eda031
Award number (PIID): W912CH-26-C-0025

Description

This is a competitive, Firm Fixed Price, One-Time Buy Contract with an Option. Total evaluated contract price of $407,966.40 for a quantity of 938 EA with an option of 938 EA.

Full description on SAM.gov

Award Overview

Award Number

W912CH-26-C-0025

Award Amount (SAM.gov award notice)

$408.0K

Award Date

Feb 11, 2026

Awardee

Awardee UEI

WMLJULH6AX97

Awardee CAGE Code

0HF27

Awardee Address

Winchester, TN 37398, UNITED STATES

Original Solicitation

Notice ID: 39a8d143df484892be77fecf61eda031

Posted Date: Feb 12, 2026

Original Response Deadline: Not specified

Contract Details

W912CH26C0025DEFINITIVE CONTRACT

Signed: Feb 11, 2026Department Of The Army

View the award

Contacts

Contracting Officer

Primary Contact

RACHEL GERVAIS

rachel.r.gervais.civ@army.mil

5206928435

Documents

No documents available.

Lifecycle

3
Version 3Award NoticeArchivedCurrentFebruary 12, 2026 3:40 PM UTC
Award Notice, Adapter, Housing, NSN: 3040-01-531-4475
Notice 39a8d143df484892be77fecf61eda031 on SAM.gov

Similar Opportunities

Title	Phase	Agency	Set Aside	Posted	Deadline
Cylinder Assembly PRE-SOLICITATION NOTICE: THIS SOLICITATION IS EXPECTED TO RESULT IN A FIRM FIXED PRICE CONTRACT WITH ONE, 1-YEAR, 100% OPTION. Item: Cylinder Assembly NSN: 3040-01-476-0514 Base Qty: 23 EA Option Qty: 23 EA Part Number (CAGE: 1QME2): AT154865 FOB Point: Destination Inspection/Acceptance Points: Origin/Origin Packaging: Military A with Special Packaging Instructions See Solicitation for additional information, which is to be posted to SAM in approximately two weeks from this presolicitation notice.	Pre-Solicitation	Department of War	Total Small Business Set-Aside	10/28/2026	11/09/2026
Ring assembly, Hanging NOUN: RING ASSEMBLY,HANGING Basic Quantity: 21 Ea. Option Quantity: 21 Ea. NSN: 2520013283433 MPN: 12321990 LEVEL OF PACKAGING: MILLITARY PRESERVATION: B THIS IS 100% SMALL BUSINESS SET ASIDE	Solicitation	Department of War	Total Small Business Set-Aside	04/30/2026	06/01/2026
Diesel Forklift Diesel Forklift. Load Capacity / Rated Load: 8,000-11,000 LBS . Load Distance, Center of Drive Axle to Fork: 22 in. Wheelbase: 78.7 in. Service Weight: 12,789 LBS. Fork Dimensions (hook type): 1.97 in. x 4.8 in. x 42 in. Axle Loading, Loaded Front/Rear: 17,978 / 2,526 LBS. Axle Loading, Unloaded Front/Rear: 5,787/7,002 LBS. Tires: Pneumatic (P), Solid (s), Non-marking (N). Lowered Mast Height H1: 88 in. Lift Height H3: 118.9 in. Extended Mast Height H4: 116.7 in. Overhead Guard Height (Cabin) H5: 87 (92) in. Overall Length I1: 164.6 in. Turning Radius Wa: 112.9 in. Smallest Pivot Pint Distance b13: 28 in. Engine Manufacturer Type: KUBOTA. Engine Power ACC to ISO 1585 : 85 hp/rpm. No. of Cylinder / Cubic Capacity: 4/3769 EA/cc. Type of Drive Control: Power shift 2/1. Service Brake: Hydraulic. Side Shift (Hook type). SEE ATTACHED SPEC SHEET.	Combined Synopsis	Department of War	Total Small Business Set-Aside	11/10/2026	11/24/2026
Bearings Salient CharacteristicsRequired Product Characteristics, brand-name-or-equal as follows:The contractor shall furnish new, unused, commercially available steel mill products meeting the material specification/grade, product form, nominal dimensions, length, and quantity stated for each Contract Line-Item Number (CLIN).Furnished products shall be free from material defects that would affect their intended use. Used, reclaimed, repaired, remnant, or substitute-grade material is not acceptable.Dimensions are nominal. Unless a tighter tolerance is expressly stated in the CLIN, material shall conform to the standard commercial tolerances applicable to its governing material specification and product form.The offeror shall identify, by CLIN, the offered manufacturer or mill/distributor; material specification and grade; product form; nominal dimensions; and any exception to this purchase description. Any exception shall be clearly identified in the quotation.Substitution of a different material grade, product form, or smaller nominal dimension is not permitted without prior written authorization by the Contracting Officer.Documentation: The contractor shall provide a certificate of conformance identifying the material specification and grade for each CLIN. [Use this sentence only if the requiring activity has a documented need: The contractor shall also provide a mill test report traceable to the delivered heat/lot.]The offered products shall meet all of the following Government-validated salient characteristics:CLIN 0001 - Thin-section bearingReference item: Kaydon Bearings JG180XP0Quantity: 6 each.Furnish six (6) thin-section bearings, brand name or equal to Kaydon Bearings JG180XP0. Each offered bearing shall be new, current production, unused, and free from defects.Offerors proposing an equal product shall submit manufacturer datasheets and a completed compliance crosswalk demonstrating compliance with each salient characteristic.CLIN 0002 - Right-hand female rod endReference item: QA1 Precision CFR8T, described as [right hand Teflon female rod end,] same as CTFD-8Quantity: 3 each. Furnish three (3) self-lubricating female rod ends, right-hand thread, brand name or equal to QA1 Precision CFR8T / CTFD-8 reference configuration. Each unit shall be new and unused.Female rod-end configuration with right-hand threaded shank.Self-lubricating PTFE/Teflon-lined spherical bearing surface, or equivalent self-lubricating liner approved by the requiring activity.CLIN 0003 - Rod endReference item: QA1 Precision CMR8T, described as [rod end,] same as CTMD-8.Quantity: 3 each. Furnish three (3) rod ends, brand name or equal to QA1 Precision CMR8T / CTMD-8 reference configuration. Each unit shall be new and unused.CLIN 0004 - Retaining ringReference item: Rotor Clip SE-98, described as [STZD RET RING].Quantity: 6 each. Furnish six (6) standardized retaining rings, brand name or equal to Rotor Clip SE-98 reference configuration. Each retaining ring shall be new and unused.CLIN 0005 - Roller chainReference item: Diamond Chain DMD-60-1R, 100-foot roll including master link.Quantity: 600 feet. Furnish six hundred (600) feet of single-strand roller chain, supplied in 100-foot rolls, with one compatible master/connecting link included with each roll; brand name or equal to Diamond Chain DMD-60-1R reference configuration. Chain shall be new, unused, and suitable for the Governments identified equipment/application.Single-strand roller-chain configuration.Nominal chain series/size: No. 60 or Government-approved equivalent dimensional series.Master/connecting link shall match the offered chain series and shall not reduce the stated load rating.Supplied lengths shall be continuous 100-foot rolls; no substituted partial lengths unless specifically authorized by the CO.CLIN 0006 - Stainless-steel swivel jointReference item: OPW 3750-0151, described as [1-1/2 inch NPT, SS swivel joint.]Quantity: 6 each. Furnish six (6) stainless-steel swivel joints, brand name or equal to OPW 3750-0151 reference configuration. Each swivel joint shall be new, unused, and complete with all components required for installation.Nominal connection size: 1-1/2 inch NPT.Product identification and technical compliance. Offerors shall identify the manufacturer, manufacturer part number, country of origin when required by the solicitation, and place of manufacture when required. For an offered equal product, the offeror shall provide manufacturer technical literature and a completed compliance crosswalk addressing each salient characteristic.Government review. Failure to provide sufficient information to establish compliance with all salient characteristics may render the quotation ineligible for award.Condition. Supplies shall be new, current production, and free from defects; used, refurbished, remanufactured, surplus, gray-market, or counterfeit items are not acceptable unless expressly authorized in writing by the solicitation.Inspection and acceptance. The Government will inspect supplies for quantity, condition, identity, documentation, and conformance with the solicitations stated characteristics. The Governments acceptance is not waived by a vendors commercial terms or disclaimers.	Combined Synopsis	Department of War	Total Small Business Set-Aside	11/06/2026	11/13/2026
Synopsis for Hand Pump Assembly, NSN: 4320-01-201-0814 THIS IS A PRE-SOLICITATION NOTICE / SYNOPSIS This procurement is for HAND PUMP ASSEMBLY This proposed solicitation is intended to result in the award of a Firm-Fixed Price type Contract for the supplies specified with a one year buying option. The Government does not intend to use FAR Part 12 for the acquisition. Procurement is 100% Small Business Set-Aside. Noun: HAND PUMP ASSEMBLY NSN: 4320-01-201-0814 P/N: 9338160 Notes: We expect to post the solicitation in 2 to 4 weeks. Technical Data Package: A link to the TDP will be available when the solicitation is released. The TDP is EXPORT CONTROLLED, Distribution D Joint Certification Program (EXPORT CONTROL): You must be certified under the United States/Canada Joint Certification / Program (JCP) (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center. "CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. NOTICE TO ALL CONTRACTORS: All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System for Award Management (SAM). You may register via the Internet at https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. Further information may be obtained through the internet at: https://www.sam.gov/SAM/pages/public/loginFAQ.jsf	Pre-Solicitation	Department of War	Total Small Business Set-Aside	11/02/2026	11/17/2026

Additional Details

Solicitation Number