GovChime
Notice ID: 26c37848309544f9828c1aa9c2a6f79dSources Sought

USACE Kansas City District - Stockton Dam and Powerhouse Procurement - Resin Impregnated Synthetic (RIS) Bushings

Responses closed . Full description on SAM.gov.

Overview

Response deadline
12:00 PM CST
Posted
November 3, 2026
Notice type
Sources Sought
NAICS
335311: Power, Distribution, and Specialty Transformer Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION NORTHWESTERN.ENDIST KANSAS CITY.W071 ENDIST KANSAS CITY
Place of performance
Stockton, Missouri
Last updated
Nov 3, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W912DQ27SS4782
Notice ID
26c37848309544f9828c1aa9c2a6f79d

Description

W912DQ27SS4782

Hydropower - Procurement of transformer bushings

NAICS 335311 – Power, Distribution, and Specialty Transformer Manufacturing; or

NAICS 333613 – Mechanical Power Transmission Equipment Manufacturing

This notice serves as a Market Research and Sources Sought/Request for Information (RFI) and is not a solicitation announcement. The purpose is to gather information on the capability and availability of potential manufacturers or suppliers interested in supplying and delivering transformer bushings and associated materials in support of the Kansas City District, Stockton Dam and Powerhouse, Stockton, MO.

The requirement is strictly for the procurement and delivery of physical supplies, including the following transformer bushings: This requirement is for the procurement of three (3) oil-to-outdoor, dry-type, capacitively graded Resin Impregnated Synthetic (RIS) bushing with a silicone rubber insulator. The bushing shall conform to IEEE Std C57.19.01-2017. Please refer to the attached draft of the Purchase Description (PD) for additional details.

Important Notes:

• This notice is for Market Research and Request for Information purposes only.

• No contract award will result from this notice.

• There is currently no solicitation available; therefore, do not request a copy of any solicitation.

• If a solicitation is issued, it will be synopsized in accordance with the Revolutionary Federal Acquisition Regulation (FAR) Overhaul (RFO) and its supplements.

• It is the responsibility of interested contractors to monitor the Government Point of Entry (GPE) for the release of any solicitation.

This Sources Sought Notice shall not be construed as a commitment by the U.S. Army Corps of Engineers (USACE), Kansas City District, to issue a solicitation or award a contract. Unsolicited proposals or other offers will not be considered in response to this notice. This notice does not obligate the Government to make any contract award.

The purpose of this RFI is to ascertain the availability of qualified contractors capable of performing the described services and to identify applicable socioeconomic classifications (e.g., Small Business, HUBZone, Service-Disabled Veteran-Owned Small Business, Women-Owned Small Business, etc.). The primary North American Industry Classification System (NAICS) code applicable to this requirement is 335311 – Power, Distribution, and Specialty Transformer Manufacturing or 333613 – Mechanical Power Transmission Equipment Manufacturing. (NOTE: Is one of the proposed NAICS codes more appropriate than the other?)

Responses to this RFI will be used by the government to make appropriate acquisition decisions.

RESPONSE INSTRUCTIONS

Responses are requested with the following information:

1. Contractor’s name, address, points of contact with telephone numbers and e-mail addresses, UEI, CAGE code, and business size under the relevant NAICS.

2. Business size/classification (to include any designations such as Small Business, HUBZone, Section 8(a) contractor, Service-Disabled Veteran-owned Small Business, Small Disadvantaged Business, Women Owned Small Business, etc.).

3. Does your firm have the capability and capacity to provide all items listed on the Product Description? If not, what can you provide? Describe your firm’s capability to supply, manufacture, source, and deliver the products noted above, to include providing the necessary manufacturing resources, quality assurance certifications, and supply chain timelines.

Responses are due no later than 06 NOV 2026, 2:00 p.m. CDT. Responses received after this date and time may not be reviewed.

Confirm your company is interested in proposing on this requirement.

Attached to this notice are the Draft Technical Specifications and Drawings. Please note that these draft documents are subject to change.

Responses shall be submitted via email to Angella Curran at angella.curran@usace.army.mil. In the subject line of your email state: Response to Transformer bushings. No responses will be accepted by mail or fax. Submittals will not be returned. Telephonic responses will not be honored.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • Sources Sought Notice.pdf

    56 KBAdded in Sources Sought version 1Posted
    Download
  • STK Bushing Purchase Description Draft.pdf

    60 KBAdded in Sources Sought version 1Posted
    Download
  • Moser Glaser 25kv 4000 amp style S150-25-F40-21-T3-BT3.pdf

    491 KBAdded in Sources Sought version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    USACE Kansas City District - Stockton Dam and Powerhouse Procurement - Resin Impregnated Synthetic (RIS) Bushings

    Notice 26c37848309544f9828c1aa9c2a6f79d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Presolicitation Notice: Synopsis for Commercial Items or Services This synopsis is prepared in accordance with the format outlined in Subpart 12.1, supplemented with additional information provided in this notice. This announcement serves as the sole notice for this acquisition; quotes are not being solicited, and a written solicitation will not be issued. Solicitation Information The solicitation number for this acquisition is W912DQ27QA022 for the procurement of an oil-to-outdoor, dry-type, capacitively graded Resin Impregnated Synthetic (RIS) bushing with a silicone rubber insulator. The bushing shall conform to IEEE Std C57.19.01-2017, at Stockton Powerhouse, Stockton, MO. **IAW RFO FAR 12.201(c)(2) Method** To promote maximum competition, the contracting officer may choose to solicit quotations directly from suppliers for acquisitions at or below the Simplified Acquisition Threshold (SAT). When soliciting directly, the following conditions apply: 1. A presolicitation notice must be posted in the Governmentwide Point of Entry (GPE) per Subpart 5.1, unless an exception in 5.101(b) applies. 2. Quotations must be solicited from a minimum of three sources. 3. Whenever practicable, solicitations should include at least two sources not previously contacted. No solicitation will be posted on the System for Award Management (SAM). For inquiries, please contact Ms. Angella Curran at angella.curran@usace.army.mil or call 816-389-3816. The solicitation documents and incorporated provisions and clauses are in effect through Federal Acquisition Circular (FAC) 2026-01 and through the Revolutionary FAR Overhaul (RFO). (1) Point of contact. Contract Specialist, Angella Curran, angella.curran@usace.army.mil Contracting Officer, Christopher W. Anderson, christopher.w.anderson@usace.army.mil (2) Set aside. Total Small Business Set-aside (100%) (3) Codes for services or supplies. a. Product Service Code (PSC): 5970 - Electrical Insulators and Insulating Materials b. North American Industry Classification System (NAICS): 335311 - Power, Distribution, and Specialty Transformer Manufacturing (4) Description of Services. The U.S. Army Corps of Engineers Kansas City District, Operations Division, at Stockton Lake Project Powerhouse, Stockton, MO, has a need for three (3) oil-to-outdoor, dry-type, capacitively graded Resin Impregnated Synthetic (RIS) bushings with a silicone rubber insulator. The bushing shall conform to IEEE Std C57.19.01-2017, as described in the purchase description. The Contractor shall furnish all plant, labor, equipment, appliances, and materials; and perform all operations required to complete the work in conformity with the drawings and specifications. The Contractor shall perform to the standards in the contract. (5) All responsible sources may submit a quotation as appropriate, which will be considered by the agency. **Applicable FAR Clauses: ** - FAR 52.212-1: Instructions to Offerors – Commercial Items - FAR 52.212-2: Evaluation – Commercial Items - FAR 52.212-4: Contract Terms and Conditions - Commercial Items Important SAM Registration Notice: In accordance with FAR 52.212-1(k), the prospective awardee must be registered and active in the System for Award Management (SAM) at https://sam.gov . As of November 8, 2019, SAM.gov procedures have changed. Interested vendors must register at beta.SAM.gov to access current notices and announcements. Contractors can find information on registration and annual confirmation requirements online at https://sam.gov, or by calling (866) 606-8220. The System for Award Management (SAM) is a free website owned and operated by the Federal Government. Small businesses seeking assistance with registration or navigation can contact the APEX Accelerators (formerly known as PTACs) is an official government contracting assistance resource for small business. Find your local APEX Accelerators (formerly known as PTACs) to get free help completing registration in SAM.gov. For general inquiries regarding government procurements or assistance in proposal preparation, local APEX Accelerators may be available to help. The Procurement Technical Assistance Program, authorized by Congress in 1985, aims to increase the number of businesses participating in the government marketplace. To locate an APEX near you, visit https://www.napex.us/locations/.
-Pre-SolicitationOpen
LOCK and DAM 24 and 25 MITER GATE MOTORS, ADJUSTABLE SPEED DRIVES, AND MACHINERY BRAKES REPLACEMENT SUPPLY CONTRACT, LOCKS 24 and 25, MISSISSIPPI RIVER BETWEEN MO. RIVER AND MINNEAPOLIS, MN.
-Combined Synopsis01/27/2026
Update: 10/28/2026 - Included RFIs, and Drawings The 184 Wing is requesting the purchase of one (1) Control power Transformer and three (3) Transformer fuses to replace Building 16 indoor switchgear transformer including installation. See attached documents/ links for Specifications or Salient Characteristics - B16 Transformer and additional solicitation information. Site Visit: Nov 10 2026 @0900 - Details in the posting links
-Combined Synopsis11/16/2026
This is a SOURCES SOUGHT NOTICE/MARKET RESEARCH SURVEY to request information for Government planning purposes only. The Army Contracting Command – Detroit Arsenal (ACC-DTA) is seeking to gain knowledge of interest, capabilities and qualifications of various members of the community, to include both small and large businesses, for production of the item identified below. Responses to this Sources Sought Notice/Market Research Survey will assist ACC-DTA in planning its acquisition strategy for a potential future acquisition. SEE ATTACHED FORM FOR REQUESTED INFORMATION
-Market Research11/19/2026
SOURCES SOUGHT NOTICE W9127826QA025 SEE ATTACHED
-Market Research10/14/2026

Additional Details

Solicitation Number

W912DQ27SS4782

Archive Date

Nov 21, 2026

Office Address

KANSAS CITY, MO, 64106-2896