GovChime
Notice ID: 77ab33278f7b4a76b941fbcc6dbc73cdPresolicitation

Commercial Vehicle Security Entry Control Point, Joint Base-MDL (Lakehurst), New Jersey

Archived on June 15, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−04:00
Posted
February 19, 2021
Notice type
Presolicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
236220: Commercial and Institutional Building Construction
Agency
Department of WarDepartment of the Army

Notice details

Office
W2SD ENDIST NEW YORK
Place of performance
Joint Base MDL, NJ
Last updated
Dec 4, 2025

Identifiers

Solicitation number
W912DS20R0015
Notice ID
77ab33278f7b4a76b941fbcc6dbc73cd

Description

The U.S. Army Corps of Engineers, New York District intends to issue a solicitation package seeking to award a firm fixed-price, Design-Build contract award through the Two-Phase, Request for Proposal (RFP), Best Value Trade Off solicitation process. The project is restricted to Small Business firms. The project description is as follows: The design & construction of a new commercial vehicle entry control point gate, roadway & control facilities that leads into the Lakehurst Naval Installation. The project will include hardened entry check-in security control buildings, covered vehicle inspection station, over-watch, passive-active barriers, crash-beam and pop-up reinforced fencing located at the perimeter. The project will also include site improvements, pavements, utilities, and communication infrastructure (i.e. closed circuit television, local network, alarm systems, CATV, etc.). The roadway will be reconfigured to align the commercial checkpoint entrance with the new County Road 547 intersection, it will have proper deceleration lanes and truck maneuverability lanes. The project scope includes the demolition of some existing buildings. All coordination, permitting and environmental remediation work will be included in the project scope. It is anticipated that the RFP will be issued on or about 16 Oct 2020 and the proposals will be due about 30 days later. The project plans & specifications will be posted electronically and any and all amendments shall be likewise posted. Hard copies will not be available. It is the contractor's responsibility to monitor the web-site for any amendments. Offerors are required to be registered in the System for Awards Management (SAM), located at www.sam.gov. Award will be made to the best value & responsible Offeror. The evaluation criteria will be as follows: Phase One: Factor 1- Relevant Specialized Past Experience; and Factor 2 - Past Performance. Phase Two will consist of Factor 3 - Qualifications of the Offerors Team and Factor 4- Scheduling. ONLY Factors 1 and 2, Past Relevant Experience and Past Performance are required for Phase One. Those Offerors passing Phase One criteria will be invited to submit for Phase Two, Factors 3 (Offerors Team Qualifications) and 4 (Scheduling). The Government will select up to five (5) Offerors to proceed onto the Phase Two portion. The project will be awarded to the Offeror whose offer is the best value trade-off to the Government. The period of performance for this project is approximately 540 calendar days from the Notice to Proceed date. The specifications will be posted electronically via the beta SAM website. The applicable North American Industry Classification System (NAICS) code is 236220 for Commercial & Institutional Building Construction. The magnitude of this construction is estimated to cost between $5,000,000 and $10,000,000. Offers will be submitted to the U.S. Army Corps of Engineers, Contracting Division, Floor 16-300, 26 Federal Plaza, New York, NY 10278 or DOD safe site. All questions must be submitted in writing via email, fax, or mail to the POC. The media selected for issuance of Synopsis/Solicitation and amendments shall solely be at the discretion of the Government; accordingly, the media utilized for this project shall be the internet. Telephone, email or fax requests for the solicitation will not be accepted or honored. Paper copies of this solicitation and amendments, if any, will not be available or issued. Plans and specifications will NOT be provided in hard paper copy or CD-ROM format. The solicitation and all amendments for this acquisition will be posted on a secure Government website once the solicitation is issued. Interested parties may download and print the solicitation at no charge from the website. All vendors who want access to the solicitation must be registered with System for Awards Management (SAM), located at www.sam.gov. Direct all contracting questions to the Contract Specialist, Mr. Mohenda Surage by e-mail to Mohenda.R.Surage@usace.army.mil .

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W912DS20R0015
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. 3×
    Pre-SolicitationCurrentOct 13, 2020

    Commercial Vehicle Security Entry Control Point, Joint Base-MDL (Lakehurst), New Jersey

    Notice 77ab33278f7b4a76b941fbcc6dbc73cd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
10/08/2026: ***Anticipated Solicitation Date, Solicitation Number as well as building description have been updated*** 08/30/2026: ***Anticipated Solicitation Date as well as building description has been updated*** ***THE SOLICITATION NUMBER HAS BEEN UPDATED TO W912QR27RA004*** DESCRIPTION: The U.S. Army Corps of Engineers (USACE) Louisville District intends to issue a Request for Proposal (RFP) W912QR27RA004 for the Maintenance and Repair Army Reserve (MRAR) of Area Maintenance Support Activity (AMSA) 21 at Joint Base McGuire-Dix-Lakehurst (JBMDL) in Burlington, New Jersey. The project will repair failing facility components and extend the economic life of the facility by 25 years, providing a modern maintenance facility that enables readiness for the Army Reserve units located in the surrounding area. The project scope includes the repair of the failing HVAC and electrical systems, the removal of non-structural interior walls to right-size rooms and create open flexible workspaces as required, the repair/replacement/upgrade of light fixtures with code compliant units, the installation of a code compliant fire alarm and suppression system, and the repair of electrical conduit distribution throughout the facility. The project also repairs the exterior structural elements, replaces the failing standing seam metal roof, and corrects all life safety deficiencies while maintaining the elements of the building's exterior. The restored facility will meet minimum DOD Antiterrorism standards. All hazardous materials (HAZMAT) removed as part of the demolition will be disposed of following all state and federal guidelines. The Contract Duration is one thousand ninety-five (1,095) calendar days from Contract Notice to Proceed. TYPE OF CONTRACT AND NAICS: This RFP will be for one (1) Firm-Fixed-Price (FFP) contract. The North American Industrial Classification System Code (NAICS) for this effort is 236220 - Commercial and Institutional Building Construction. TYPE OF SET-ASIDE: This acquisition will be a 100%Total Small Business Set-Aside. SELECTION PROCESS: This will be a two-phase Design/Build procurement process. The proposals will be evaluated using a Best Value Tradeoff source selection process. Potential offerors are invited to submit their performance, technical, and capability information as will be described in section 00 22 16 of the Solicitation, for review and consideration by the Government. The selection process for Phase I will evaluate such factors (not necessarily in order): Past Performance and Technical Approach for Design/Build. Pro Forma Information such as bonding and financial capability will also be required to meet the minimum requirements of the solicitation Following completion of the evaluation of Phase I, a target of five (5) of the most highly qualified offerors will be invited to participate in Phase II. The selected offerors for Phase II will be invited to submit additional information as will be described in Section 00 22 18 of the Solicitation, for review and evaluation by the Government. The selection process for Phase II will evaluate such factors as: Design Narrative, Management Plan, and Price. Standard Form (SF) 1442 will also be required. (NOTE: The evaluation factors for Phase II are subject to change with the Phase II amendment.) All evaluation factors, other than cost or price, are considered approximately equal to cost or price. DISCUSSIONS: The Government intends to award without discussions but reserves the right to conduct discussion should it be deemed in the Government's best interest. CONSTRUCTION MAGNITUDE: The magnitude of this construction project is anticipated to be between $10,000,000 and $25,000,000. ANTICIPATED SOLICITATION RELEASE DATE: The Government anticipates releasing the solicitation on or about 30 October 2026 and approximate closing date on or about 30 November 2026. Actual dates and times will be identified in the solicitation. Responses to this synopsis are not required. Additional details can be found in the solicitation when it is posted. This notice will be updated if the anticipated soliciation release date extends beyond 30 October 2026. SITE VISIT: A site visit will be held following the issuance of the Phase II solicitation to the Offerors selected to move forward. The exact location and time will be included in the solicitation. SOLICITATION WEBSITE: The official solicitation, when posted, will be available free of charge by electronic posting only and may be found at federal Contracting Opportunities website, https://sam.gov. Paper copies of the solicitation will not be issued. Telephone, email, and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. Amendments, if/when issued, will be posted to the website for electronic downloading. This will be the only method of distributing amendments prior to closing; therefore, it is the Offerors responsibility to check the website periodically for any amendments to the solicitation. REGISTRATIONS: Offerors shall have and shall maintain an active registration in the following database: System to for Award Management (SAM): Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.gov to be eligible for a Government contract award. If the Offeror is a Joint Venture (JV), the JV entity shall have valid SAM registration in the SAM database representing the JV as one business/firm/entity. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right award to the next prospective Offeror. POINT-OF-CONTACT: The point-of-contact for this procurement is Contract Specialist, Mr. Seth Dukes at seth.j.dukes@usace.army.mil.
-Pre-Solicitation12/21/2026
THE SOLICITATION IS NOW POSTED - The Army contracting Command - NJ, intends to award a firm fixed price contract as a result of the solicitation. please review the attached Statement of Work (SOW), and Solicitation for the detailed requirement. The solicitation is 100% Small Business Set Aside.-The requirement response date is posted on this notice and is also included in the solicitation. **It is the responsibility of the Offeror to review the webpage for notice of amendments, updates, or changes to the solicitation. **
-Solicitation08/24/2026
North Region Small Business MATOC, Mobile District J&A Capacity Increase
-Special Notice11/27/2026
The U.S. Army Corps of Engineers (USACE), New York District, has a requirement for the design and construction of a new roughly 26,000 SF hangar at Lakehurst on Joint Base McGuire-Dix-Lakehurst (JBMDL). The project is anticipated to provide a permanent, secure, and efficiently configured Naval Secure Test and Research (NavSTAR) hangar to support aircraft compatibility testing at the Lakehurst test site on JBMDL. The Government is seeking industry feedback regarding the most effective means to plan, design, procure, construct, commission, and transition the new hangar. 1. NavSTAR Hangar Facility and Utility Systems New Hangar Facility: Construct a new permanent 25,172 SF footprint steel-frame hangar facility west of Bldg. 685 to support simultaneous 1-in/1-out fixed-wing carrier aircraft compatibility testing. Space includes several secure rooms that must be designed, built, and certified to the current ICD 705 standards with all appropriate secure network connections. Include a fully climate-controlled maintenance and testing bay, maintenance workshop, two (2) logistics warehouses, a payloads storage room, a security office, and dedicated support space for personnel. Ensure the facility incorporates high-performance and sustainable building design features maximizing energy efficiency in accordance with DoD Unified Facilities Criteria (UFC), federal laws, and Executive Orders to meet or exceed useful service life. Primary Power and Electrical Distribution: Provide a new 750 kW standby generator to supply emergency/backup power to the hangar facility and its secure testing operations. Provide complete primary and secondary electrical distribution systems, including transformers, apron lighting, and exterior security lighting. Integrate telecommunications infrastructure and secure communications lines directly with the existing installation network. Climate Control, Mechanical, and Fire Systems: Provide a fully climate-controlled HVAC system tailored for the maintenance/testing bay and personnel support areas, including dedicated environmental controls for secure operational zones. Provide potable water lines, sanitary sewer lines, natural gas piping, and a dedicated fire suppression system. Ensure all mechanical systems utilize life-cycle cost-effective, high-efficiency systems engineered for long-term utility-support operations. Commissioning, OMSI, and Post-Award Support: Provide complete system commissioning, cybersecurity feature testing, and operational validation. Develop and deliver Operations and Maintenance Support Information (OMSI) technical manuals to the Government. Provide Post Construction Award Services (PCAS) to support transition-to-operations. 2. Civil, Structural, and Site Infrastructure Site Preparation, Grading, and Drainage: Perform site clearing, excavation, and site preparation, including the possibility of 10,000 CY of bulk cut/fill earthwork. Implement a comprehensive storm water management facility incorporating Low Impact Development (LID) design elements to control runoff and protect local ecosystems. Foundations and Structural Systems: Construct a structural steel-frame building super-structure utilizing a built-up roofing assembly. Provide a spread footing reinforced concrete foundation engineered to mitigate local soil bearing and settlement risks. Paving and Site Access Improvements: Construct a dedicated fixed-wing taxiway to connect the hangar with the adjacent catapult system on the test runway. Construct a rotary-wing parking apron, a hangar access apron, and organizational vehicle parking. Construct dedicated concrete and asphalt access roads, including curbs, grading, and sidewalks, connecting the facility directly to the existing base road network via Deweese Road and E. Clubhouse Lake Road. 3. Utility Connections, Interfaces, and Cutover Work Existing Utility Interfaces: Connect the new facility to existing base potable water, sanitary sewer, natural gas, electrical, telecommunications, and storm water drainage networks. Confirm existing-system capacities, tie-in locations, and coordinate necessary utility outage windows with base public works. Operational Continuity & Interface Management: Coordinate all tie-in actions directly adjacent to the existing active catapult system on the test runway to ensure zero unplanned disruptions to active aircraft compatibility testing. Coordinate utility cutovers and final energization sequences with JBMDL installation operations to maintain continuous mission capabilities. 4. Security, Cybersecurity, and Site Safeguards Physical Security and Site Access: Provide dedicated physical security features in accordance with Geographic Combatant Commander policies and Unified Facilities Criteria (UFC) for DoD Minimum Antiterrorism Standards for Buildings. Construct roughly 650 LF of 8-foot industrial chain-link perimeter security fencing to establish a secure boundary. Install two (2) overhead vehicle slide gates to provide strictly controlled physical access to the secure aircraft operational apron and hangar apron areas. Cybersecurity and Secure Information Exchange: Provide robust cybersecurity features for all Facility-Related Control Systems (FRCS) in accordance with current DoD criteria. Ensure secure communications infrastructure and information systems are fully commissioned, with all technical compliance costs fully integrated under the early-stage conservative risk posture. Securely handle and store all project data, design files, and specifications in accordance with federal laws and regulations governing Controlled Unclassified Information (CUI). Estimated Acquisition Magnitude: $50,000,000.00 to $75,000,000.00
-Market Research11/12/2026

Additional Details

Solicitation Number

W912DS20R0015

Archive Date

Jun 15, 2021

Office Address

NEW YORK, NY, 10278-0004