GovChime
Notice ID: fb72ee62c6b044fe8ca19c2c82a3e6abSolicitationArchived

CPMT Boatlift Maintenance

Archived on June 10, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM EDT
Posted
May 22, 2026
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION NORTH ATLANTIC.ENDIST NEW YORK.W2SD ENDIST NEW YORK
Place of performance
Jersey City, New Jersey
Last updated
Oct 30, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W912DS26RA019
Notice ID
fb72ee62c6b044fe8ca19c2c82a3e6ab

Description

As of 22 May 2026:  Amendment 0002 posted to add Clauses 52.245-1 and 52.245-2 regarding Government Property, and respond to questions from interested vendors.

As of  13 May 2026: Amendment 0001 posted to correct blokc 10 of the solicitation.

USACE New York District requires a contract to provide all supervision, labor, equipment, and materials to accomplish the following maintenance tasks in accordance with manufacturer’s recommendation of the Syncrolift Shiplift S-5297as listed in the SOW.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (4)

  • Amendment 0002 - RFI Responses.pdf

    254 KBAdded in Solicitation version 6Posted
    Download
  • Solicitation Amendment W912DS26RA0190002 SF 30.pdf

    4.1 MBAdded in Solicitation version 3Posted
    Download
  • Solicitation Amendment W912DS26RA0190001 SF 30.pdf

    4.2 MBAdded in Solicitation version 2Posted
    Download
  • Solicitation - W912DS26RA019 Professional Appearance.pdf

    1.8 MBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1SolicitationArchived

    CPMT Boatlift Maintenance

    Notice b80b81f7205a4785ada38997955b6d61 on SAM.gov

  2. 2
    Version 2SolicitationArchived

    CPMT Boatlift Maintenance

    Notice 4af4b4e140c5419aa0b4abb84b6f54a1 on SAM.gov

  3. 3
    Version 3SolicitationArchived

    CPMT Boatlift Maintenance

    Notice 86da1f0176984b4b8b25e4d7df84e6b3 on SAM.gov

  4. 6
    Version 6SolicitationArchivedCurrent

    CPMT Boatlift Maintenance

    Notice fb72ee62c6b044fe8ca19c2c82a3e6ab on SAM.gov

  5. 5
    Version 5Award Notice

    Type changed from Solicitation to Award Notice

    CPMT Boatlift Maintenance

    Notice 41f1d99e9ab949bcb6582e1f182461cf on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
-Combined Synopsis11/13/2026
Hammar Spreader Beam
-Combined Synopsis11/12/2026
Hoist Stand
-Combined Synopsis09/24/2026
High Performance ELIMINATOR
-Combined Synopsis08/06/2026

Additional Details

Solicitation Number

W912DS26RA019

Archive Date

Jun 10, 2026

Office Address

NEW YORK, NY, 10278-0004