Notice ID: 6bbc9ff9edf04e00b645c9a7082ca362Combined Synopsis/Solicitation
Chief Joseph Dam Station Service Refurbishment - Turbines & Generators
Archived on April 14, 2022. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM UTC−07:00
- Posted
- March 17, 2022
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 237990: Other Heavy and Civil Engineering Construction
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W071 ENDIST SEATTLE
- Place of performance
- Bridgeport, WA, 98813
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W912DW22R0001
- Notice ID
- 6bbc9ff9edf04e00b645c9a7082ca362
Description
POINT-OF-CONTACT: The point-of-contact for administrative or contractual questions is Contract Specialist Charles Idle at email: Charles.D.Idle@usace.army.mil. Please no phone calls. All questions must be submitted in writing to the above point-of-contact. OVERVIEW: U.S. Army Corps of Engineers (USACE), Seattle District, requires refurbishment of the two station service units at Chief Joseph Powerhouse. The existing generators have a nameplate rating of 3.0 MVA and the existing turbines are Francis-type units with a nameplate rating of 3,500 HP at 171 feet of head. The following is a list of the major items of work included in this Contract. The work includes the removal of the existing components and systems of components which are known to have lead-based paint, without being specifically identified. The work includes, but is not limited to: General Work Perform all work required for mobilization/demobilization. Remove and dispose of items/systems to be discarded or replaced. Provide platforms, tools and equipment as specified and required to perform the required work. Clean turbine pit, generator, work and storage areas used by the Contractor. Dispose of (recycle) grease, etc. Perform pre outage testing and post reassembly generating unit commissioning. Draft tube fall protection anchors. Mechanical Work Disassemble the generating units and turbines. Inspect and refurbish turbine components. Paint refurbished components. Refurbishment of turbine guide bearings. Provide new Teflon thrust shoes. Refurbish upper and lower generator guide bearings. Furnish bearing RTDs and replace existing RTDs with platinum RTDs. Reassemble generating units. Perform complete alignment of generating units. Perform pre and post refurbishment generating unit operational tests. Disassemble, clean, inspect, refurbish and reinstall all generator brakes and associated appurtenances. Brake ring inspection, with optional refurbishment. Provide new thrust bearing oil coolers. Provide new surface air coolers. Provide new float switches in the bearing tubs. Provide new below the hook lifting devices. Provide new turbine guide bearing coolers. Provide new main cooling water piping and valves. Provide new penstock equalizing and drain valves and piping. Provide new wicket gates. Refurbish the wicket gate servomotors. Inspect the rotor spiders. Electrical Work Rewind the stators. Replace stator cores. Inspect and clean rotors and test the rotor field windings. Optional re-insulation of the rotor field poles. Replace field leads. Replace 4160-volt generator cables. Replace neutral breaker. Perform electrical work related to the installation of bearing RTDs. Perform electrical work related to installation of float switches and other instruments. The magnitude of construction is estimated to be between $10,000,000 and $25,000,000. The resulting contract will be a Firm Fixed-Price contract. The NAICS code for this procurement is 237990, Other Heavy and Civil Engineering Construction, and the associated small business size standard is $39,500,000 in average annual receipts. The solicitation will be issued as Unrestricted. The solicitation documents for this requirement will be issued in electronic format only and will be made available online via the SAM website at www.sam.gov under the subject solicitation number. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking for any update(s) to the Notice/Solicitation. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document(s) posted at the referenced website. To obtain automatic notifications of updates to this notice, you must log in to sam.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the Add Me To Interested Vendors button in the listing for this solicitation on sam.gov. IMPORTANT NOTICE: All contractors proposing on Department of Defense (DoD) solicitations must be registered in the System for Award Management (SAM) database prior to award of a contract. The purpose of this database is to provide basic business information and capabilities to the Government. The SAM website can be accessed at www.sam.gov. Contractors are encouraged to register as soon as possible. All new contracts can be made ONLY to contractors who are registered in SAM. This requirement applies to all DoD contract awards. ACCESS TO SITE VISIT FOR FOREIGN NATIONALS: Processing request for visits by Foreign Nationals can take up to 30 business days to complete and may impact the Contractors ability to attend if the paperwork is not approved before the site visit. It is highly recommended that each company plans to have a U.S. Citizen attend the site visit on their behalf. Non-U.S. Citizens and U.S. Citizens wishing to attend the site visit must complete the Request for Visitation Authority form (included in this announcement as an attachment) and submit either a scanned color copy of either the participants passport picture and signature pages or front and back of a drivers license as soon as possible but no later than noon Pacific Time on 20 December 2021 so it can be processed by USACE Security. The site visit is scheduled for January 6th at 10am. Please submit required documentation for both US Citizen and Non-U.S. Citizens wishing to attend the site visit to Adrienne Murphy, Adrienne.E.Murphy@usace.army.mil (206) 764-6765.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W912DW22R0001- Market Research
- Pre-Solicitation
- Combined Synopsis
- Market ResearchSep 9, 2021
CJD Station Service - Primary Component
- 2×Pre-SolicitationNov 4, 2021
CJD Station Service Refurbishment - Turbines & Generators
- 7×Combined SynopsisCurrentDec 14, 2021
Chief Joseph Dam Station Service Refurbishment - Turbines & Generators
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amendment 0003: See attached amendment and related document for complete details. Amendment 0002: See attached amendment and related document for complete details. Amendment 0001: See attached amendment and related document for complete details. Chief Joseph Dam Station Service Exciters. Project Location: Bridgeport, WA. The solicitation is an unrestricted full and open competitive acquisition. NAICS 237990 Other Heavy and Civil Engineering Construction. Small Business Size Standard $45,000,000. Disclosure of the magnitude of construction project: Between $1,000,000 and $5,000,000. This solicitation is utilizing the Trade-off process procurement method as described in Federal Acquisition Regulation (FAR) Part 15 to award a firm fixed-price (FFP) contract. Please refer to the attached solicitation document, specifications, drawings, and attachments for details. | 69% | Solicitation | 05/07/2026 |
EVENT DETAILS: Date: 3 December 2026 Time: 0930-1430 PT Format: Presentation & Site walk Registration Due Date: 23 November 2026, 1200 PT; Please register by returning completed Request for Visit Authority (RVA) by email to: Sarah Malowicki, Project Manager, at sarah.m.malowicki@usace.army.mil, AND Londres Medranda, Contract Specialist, at londres.medranda@usace.army.mil. Confirmation email will be sent upon receipt of completed RVA. Who Should Attend: Interested vendors, including small businesses, large businesses, and other industry partners. Attendance is limited to 2 personnel per company. Attendance is limited to United States Citizens. Attendance at this event is not mandatory. Pre-registration is required. DESCRIPTION: In accordance with the Revolutionary Federal Acquisition Regulation Overhaul (RFO) 15.101(a) Early exchanges with industry, the United States Army Corps of Engineers (USACE), Seattle District (NWS) is hosting an Industry Day on 3 December 2026 at Chief Joseph Dam in Bridgeport, Washington. This Industry Day provides an opportunity for interested parties to inspect the existing 15.5KV Main Unit XJ Breaker disconnects first-hand. By hosting this first-hand inspection, the government aims to gather technical feedback and explore industry alternatives for modernizing this equipment. We are seeking input from qualified, experienced sources, capable of performing this modernization work. PROJECT BACKGROUND: At Chief Joseph Dam the current Unit 1-16 XJ Breaker disconnects are original BBC (Brown Boveri Corporation) equipment and rated 6000A according to the BBC shop drawings. The switch operators are pneumatically driven, and are actuated by operation of a complex key interlocking scheme with the circuit breaker. The load side and source side disconnects are mechanically linked and simultaneously operated by a single shared pneumatic actuating system. The current Units 17-27 breaker disconnects are original GE equipment. The load side and source side disconnects are mechanically linked and simultaneously controlled by mechanically operated hand crank. USACE is evaluating options to improve reliability, maintainability, remote-operating capability, and overall generating-unit availability. • Option 1: Refurbish and restore existing disconnect switches to an approved condition equivalent to original design intent, as technically feasible. Integrate motorized mechanisms on the switch arms to enable remote operation, and comprehensively overhaul and test the existing main unit breakers to ensure optimal system protection. • Option 2: Replace the disconnect switches with new electrically operated units and refurbish the existing breakers. • Option 3: Replace both the disconnect switches (with new electrically operated units) and the main unit circuit breakers. • Option 4: Replace the entire switchgear assembly with new enclosures, modern electrically operated disconnect switches, and new circuit breakers (includes associated controls, protection, buswork and new enclosure). Chief Joseph Dam has several critical limitations that affect this project, primarily related to space constraints. This Industry day will present the options under consideration, obtain industry feedback on technical feasibility and constructability, and identify potential risks, constraints and cost drivers. USACE is requesting feedback on the following questions and relevant, non-binding information: Does your company have the ability, capacity, interest and willingness to perform the proposed options? Does your company have experience with comparable medium-voltage/high-current generation-station disconnect and breaker modernization projects? We are not currently requiring quotes or bids, however rough estimates would be greatly appreciated. Recommended technical approaches or alternatives Major schedule outage, access, safety, supply-chain or constructability risks. Do you believe all aspects of this requirement could be successfully performed by the small business sector under NAICS 237990 (Size standard $45M)? (Yes/No). If No, what estimated percentage do you think can be subcontracted out to small business? Small Business (SB) ______% Small Disadvantaged Business (SDB) ________% Woman-Owned SB (WOSB) _______% Veteran Owned SB (VOSB) _______% Service Disabled VOSB (SDVOSB) _______% Historically Underutilized Business Zone (HUBZone) _______% Important Notice: Attendance and participation is not required for consideration on future contracts related to this work. The U.S. Government is not obligated to pay for any information, documentation, demonstrations, or data provided, nor will it reimburse any costs incurred by your organization in preparing responses, traveling to, or participating in this Industry Day and physical equipment inspection. All costs associated with attending this event and participating in this information exchange are solely at the responding party’s expense. Small Business Program Inquiries: Enshane Hill-Nomoto: Enshane.Nomoto@usace.army.mil https://www.nws.usace.army.mil/Business-With-Us/Small-Business/ Thank you for your interest in this USACE project. | 66% | Special Notice | 11/23/2026 |
AWARD NOTICE: INVITATION FOR BID W9126G26BA010 for Joe Pool Dam Slide Repair at Joe Pool Lake, Texas. This announcement is a competitive small business set aside, firm-fixed price, Joe Pool Dam Slide Repair civil works construction services at Joe Pool Lake, Texas. The North American Industry Classification System code (NAICS) for this procurement is 237990-Other Heavy and Civil Engineering Construction which has a small business size standard of $45 Million. The Product Service Code is Z2PC-Repair or Alteration of Dams. Project Scope: The contractor shall repair four shallow slides (Slides 18, 20, 21, and 28) on the upstream and downstream dam embankment slopes. Work includes the removal of slide debris; excavation of the slide area with bench-cutting into the stable embankment and a keyway into the foundation toe; lime-treatment of excavated soil; placement and compaction of treated soil to restore original design contours; and final surface restoration with riprap on the upstream slope and topsoil with vegetation on the downstream slope. | 47% | Awarded | Open |
NESP LD25 1200 ft Lock --------- The new lock at Lock 25 will be constructed in the downstream direction in the auxiliary miter gate bay, which has minimum provisions for an adjacent 360-foot-long lock and is referred to as Location 3 in the System Feasibility Study (September 2004). This contract will consist of construction of a new 1,200-foot drilled shaft-founded lock in the auxiliary miter gate bay, a 1,200-foot upstream ported guard wall, and a 650-foot downstream guard wall. The existing 600-foot lock will remain in place and once the new lock is constructed and operational, will become an auxiliary lock chamber used primarily by recreation traffic or when the 1,200 ft lock is out of service. ------------ SEE ATTACHMENT FOR FULL DETAILS OF UPCOMING REQUIREMENT SOLICITATION. --------- Attachment 0004 Plans (Volume 1-7) and Attachment 0005 Navisworks Federated Model must be requested via email to Contract Specialist, Whitney Dee at whitney.r.dee@usace.army.mil. Upon request they will be sent via DoD SAFE, since the files are too large to attach within PIEE or send via email. ------ SEE UPDATE LABELED 0817 FOR FULL DETAILS OF UPCOMING PRE-PROPOSAL SITE VISIT. -------------------- AMENDMENT 0001 provides updates in accordance with some of the ProjNet Bidder Inquiries and Government Responses posted through 31 August 2026. Additional questions and answers and updates will be provided in forthcoming amendments. See all attachments for full details.-------------------- AMENDMENT 0002 provides updates in accordance with some of the ProjNet Bidder Inquiries and Government Responses posted through 15 September 2026. Additional questions and answers and updates will be provided in forthcoming amendments. See all attachments for full details.-------------------- AMENDMENT 0003 provides updates in accordance with some of the ProjNet Bidder Inquiries and Government Responses posted through 5 October 2026. Additional questions and answers and updates will be provided in forthcoming amendments. See all attachments for full details.-------------------- AMENDMENT 0004 provides updates in accordance with some of the ProjNet Bidder Inquiries and Government Responses posted through 20 October 2026. Additional questions and answers and updates will be provided in forthcoming amendments. See all attachments for full details.-------------------- AMENDMENT 0005 extends the proposal due date to 10:00AM CST, Wednesday, December 9, 2026. See all attachments for full details..-------------------- AMENDMENT 0006 provides updates in accordance with the final set of ProjNet Bidder Inquiries and Government Responses. See all attachments for full details. | 46% | Solicitation | 12/09/2026 |
The U.S. Army Corps of Engineers, New England District is issuing this Sources Sought Announcement for Construction Services for the for the repairing of the inlet pipe to the float well and replace weathered/damaged staff gauges at the Surry Moutain Lake Dam in Surry NH. This announcement is to determine interest, availability and capability of 8(a), HUBZone, Service-Disabled Veteran-Owned, Women-Owned and Small Business concerns for this project. The NAICS code for this procurement is 237990 with a size standard of $45M. The project is planned to be solicited in the Winter of 2026 with construction to begin place in the Summer of 2027. The estimated construction cost is between $350,000 - $500,000. The project site is the inlet culvert on the lake side of the Surry Mountain Dam in Surry, NH. Work for this project will likely include, but not be limited to, the following: Coffer dam at inlet pipe location. Float well pipe (3-inch cast iron) cleaning. Installation of internal liner for float well pipe. Pre and Post liner installation CCTV inspections. Repairs to the slash-zone pipe segment Protection and concrete encasement of the external float well pipe Staff Gauges: Pressure treated posts with attached enamel coated metal measuring strip. Scheduled work will be affected by depth of pool. Assumed low pool depths are July and August (when work can be conducted safely), but adverse weather conditions (rain events) could delay or postpone work schedules. Surry Mountain staff will keep COR informed of pool levels to anticipate when work can commence if outside assumed low pool depths. Interested firms should submit a capabilities package to include the following: business classification (i.e. HUBZone, small business, etc.), as well as qualifications and experience in performing the work components stated above. Please include at least two specific examples of the firm’s experience performing the work requirements stated above. The projects must have been performed within the last seven years. Please indicate the team subcontractor(s) (if any), including their prior experience and qualifications, which will be used to support the offeror’s effort, and their experience must also have been performed within the last seven years. Proof of bonding capability is required. Responses are limited to twenty pages. Responses are due by 23 November 2026. Responses should be emailed to: Kyle Hall – kyle.k.hall@usace.army.mil Phone Contact: (978) 318-8479 Interested firms shall provide the above documentation in one original form and one copy. The Government will not pay for any material provided in response to this market survey nor return the data provided. This notice is for information purposes only and is not a request to be placed on a solicitation mailing list nor is it a Request for Proposal (RFP) or an announcement of a solicitation. The results of this survey will be considered to be in effect for a period of one year from the date of this notice. Government Agency URL: www.nae.usace.army.mil Government Agency URL Description: New England District, Corps of Engineers | 46% | Market Research | 11/23/2026 |
Additional Details
Solicitation Number
W912DW22R0001
Archive Date
Apr 14, 2022
Office Address
SEATTLE, WA, 98134-2329