GovChime
Notice ID: 235b7a9110e7a22c0a1726069f9820ceSolicitation

Z--Pre-solicitation notice to move two TSW(Top Spillway Wier)components to upstream spillway slots at McNary Dam, remove the downstream TSW2 components and haul away for disposal.

Archived on May 9, 2010. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC+02:00
Posted
March 19, 2010
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY ENGINEER DISTRICT WALLA WAL
Place of performance
USACE District, Walla Walla 201 N. Third Avenue, Walla Walla WA 99362-1876 US
PSC
Z: MAINT, REPAIR, ALTER REAL PROPERTY
Last updated
Dec 5, 2025

Identifiers

Solicitation number
W912EF10Q0027
Notice ID
235b7a9110e7a22c0a1726069f9820ce

Description

This synopsis is not a request for quotes or proposals. This is a pre-solicitation notice that a solicitation is scheduled to be released via FedBizOpps (wwww.fbo.gov) in the near future detailing this requirement. The contractor shall reconfigure the spillway gates according to the contract plans (to be provided with solicitation)to provide access to both the TSW1 crest, the TSW2 crest, the TSW2 leaf support frame, and the TSW2 downstream leaf. In order to obtain access to the TSW2 crest it is first necessary to remove the TSW2 downstream components. Currently TSW1 and 2 are located in spillbay19 and 20. These components are not readily suitable for highway transport without some disassembly. As a result the contractor shall take these components to a McNary provided work site for disassembly. When originally constructed, a special bottom seal assembly was fabricated and installed on the bottom of one upper spillway gate leaf for use in suspending flow over the TSW2 crest. This seal assembly shall also be removed from the gate at the disassembly site. The contractor shall then haul the downstream TSW2 components and the seal assembly offsite for disposal. With the TSW2 downstream components out of the way, the contractor shall then reconfigure the spillway gates to provide access to the TSW1 and TSW2 crest pieces. The contractor shall take those crest pieces and place them in two upstream spillway gate slots provided by McNary. Finally the contractor shall reconfigure the TSW spillbays to provide for normal spillway operation. The TSW and spillway gate components are large and heavy and not conducive to manipulate with a mobile crane. McNary will provide contractor access to a spillway crane. This announcement is for informational and planning purposes only and is not to be construed as a comitment by the Government, implied or otherwise, to issue a solicitation or award a contract.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Jean DesJarlais, 509-527-7222 USACE District, Walla Walla

Documents

No documents available.

Lifecycle

Solicitation:W912EF10Q0027
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationFeb 10, 2010

    Z--Pre-solicitation notice to move two TSW(Top Spillway Wier)components to upstream spillway slots at McNary Dam, remove the downstream TSW2 components and haul away for disposal.

    Notice 8b1a45f9aa86585a2cc18b8545b62b19 on SAM.gov

  2. SolicitationCurrentMar 19, 2010

    Z--Pre-solicitation notice to move two TSW(Top Spillway Wier)components to upstream spillway slots at McNary Dam, remove the downstream TSW2 components and haul away for disposal.

    Notice 235b7a9110e7a22c0a1726069f9820ce on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The disassemble, removal, and disposal of one (1) Kardex Remstar Lektriever electronic card filesystems at the Buffalo Military Entrance Processing Station (MEPS).* Amendment 0001 provides Government responses to questions from Industry and updates the Solicitation accordingly.
64%
AwardedOpen
The disassemble, removal, and disposal of one (1) Kardex Remstar Lektriever electronic card filesystems at the Buffalo Military Entrance Processing Station (MEPS).* Amendment 0001 provides Government responses to questions from Industry and updates the Solicitation accordingly.
64%
Solicitation09/17/2026
The basis of award for this BPA is lowest price. Future calls will be completed amongst this BPA. It will be awarded to one contractor and will be awarded the lowest offer. Please review the scope of work, specifications, and provide a quote for the requested items. Offerors are instructed to provide quote pricing inclusive of any applicable discounts. The offeror must complete the Price Breakout Schedule contained herein. The successful offeror will be determined the lowest price evaluated priced (base and all options). A single Blanket Purchase Agreement will be awarded from this RFQ.The purpose of this document is to establish a Blanket Purchase Agreement (BPA) between the U.S. Army Corps of Engineers (USACE) and qualified contractors for providing all plant, labor, and materials to perform periodic and annual crane inspections and load testing services as described herein.
64%
Solicitation05/15/2026
The work covered by this section of the specifications consists of furnishing all plant, labor, equipment, supplies and materials, and in performing all operations necessary for the inspection, maintenance, and repair of all elevators systems specified herein and in Technical Exhibit 1. The work accomplished shall be in strict accordance with applicable specifications and drawings, and subject to the terms and conditions of the Contract. See attached documents *Amendment 0001 Updates all attachments.
58%
Solicitation01/08/2027
This is a SOURCES SOUGHT and is for informational/market research purposes only. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION. The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining the category of Small Business Set-Aside. The proposed North American Industry Classification System (NAICS) Code is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, which has a corresponding Size Standard of $12.5 million dollars. The 125 Fighter Wing, Florida Air National Guard, Jacksonville, FL is seeking sources to perform 12-year hydrostatic testing, recharge, or repairs on 33 Each Amerex model 600k, 150lb Halon Fire Extinguishers. The Contractor shall provide documentation that they are EPA approved Section 608 technician certified under 40 CFR Part 82, Subpart F and meet the specific requirements of Subpart H for halon emissions reduction. Responses to this sources sought notice must be submitted electronically (via email). Please return the attached Sources Sought Cover Sheet with your email response. A contractor’s response to this Sources Sought shall be limited to the information sheet and five (5) additional pages of information for past performance or experience which may help in market research for industry capacity and shall include the following information: 1. Contractor’s name, address, point of contact, phone number, email address and CAGE code. 2. Contractor’s small business category and business size: Small Business, Small Disadvantaged, 8(a) firm, Historically underutilized Business Zones (HUBZone), Economically Disadvantaged Women-Owned Small Business (EDWOSB), and Service- Disabled Veteran-Owned Small business(SDVOSB). 3. Provide a maximum of two examples of projects similar in size, scope, and complexity with a brief description of each project, customer name, contract number, and the dollar value. Projects considered similar in scope to this project include a variety of field support requirements for the same projects simultaneously. 4. Provide additional relevant information on the contractor’s experience/capabilities as it pertains to the proposed work outlined. DISCLAIMER: This notice does not obligate the Government to award a contract. No reimbursement will be made for any costs associated with providing information in response to this Sources Sought or any follow up information. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s qualification to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or to provide feedback to respondents with respect to any information submitted. After a review of the responses a solicitation may be published on www.SAM.gov. However, responses to this notice will be considered adequate to a solicitation. All interested partied must be registered in the System for Award Management (SAM) at https://www.sam.gov and remain current for the duration of the contract to be eligible for award of a Government contract.
58%
Market Research11/13/2026

Additional Details

Solicitation Number

W912EF10Q0027

Archive Date

May 9, 2010