GovChime
Notice ID: 7851cd17ca0bc63e5d03cdaa8f1a58a0Award NoticeAwarded

52--specifications pertain to the purchase of one (1) hydraulic power unit, one (1) torque wrench, and two (2) sockets.

Awarded on August 3, 2010. Full description on SAM.gov.

Awarded tounder W912EF10P0134 (source: SAM.gov award notice)• $90.8K

Overview

Posted
August 4, 2010
Notice type
Award Notice
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY ENGINEER DISTRICT WALLA WAL
Place of performance
Lower Granite Lock and Dam 885 Almota Ferry Road Pomeroy WA 99347-9632 US
PSC
52: MEASURING TOOLS
Last updated
Dec 5, 2025
Award date
Aug 3, 2010
Award amount (SAM.gov award notice)
$90.8K

Identifiers

Solicitation number
W912EF10Q0095
Notice ID
7851cd17ca0bc63e5d03cdaa8f1a58a0
Award number (PIID)
W912EF10P0134

Description

Fabricate and deliver a one (1) hydraulic power unit; one (1) 3-1/2 inch square drive, hydraulically operated, 100,000 ft-lb torque wrench; and two (2) 3-1/2 inch square drive sockets to be used for removing and replacing the main unit shaft coupling bolts that couple the main shaft to the intermediate shaft and the turbine coupling bolts that couple the intermediate shaft to the turbine shaft. These items shall be delivered to Lower Granite Dam by the date shown in Section Shipment and Delivery. The successful bidder shall also provide training (if recommended by the manufacturer), documentation in the form of test certificates and Operation and Maintenance (O&M) Manuals, and other items as stated in the specifications. Hydraulic power unit and wrench shall develop 100,000 foot-pounds of torque, be 3-1/2 inch square drive, provide no less than 28 degrees of nut rotation per each stroke of hydraulic cylinder, be constructed of high-strength chrome-molly steel (lightweight titanium or aluminum alloy will not be accepted), and be able to operate with a full 100% duty cycle. Wrench shall have multi indexable cylinders to allow for full 360 degrees rotation to allow the operator to clear any task set-up obstacles. The two (2) sockets shall be constructed of 4140 steel and shall be the correct size to fit on the coupling nuts, as shown in the attached drawings. One (1) each socket 9 3/4 inch and one (1) each socket 6.5-8 hex nut, both sockets fit on 3-1/2 inch drive of torque wrench.

Full description on SAM.gov

Award Overview

Award Number

W912EF10P0134

Award Amount (SAM.gov award notice)

$90.8K

Award Date

Aug 3, 2010

Awardee

Original Solicitation

Notice ID: 7851cd17ca0bc63e5d03cdaa8f1a58a0

Posted Date: Aug 4, 2010

Original Response Deadline: Not specified

Contacts

Contracting Officer

Primary Contact

W. Craig Kendall, 509-527-7213 USACE District, Walla Walla

Documents

No documents available.

Lifecycle

Solicitation:W912EF10Q0095
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. Pre-SolicitationJun 16, 2010

    36--SYNOPSIS for supply and delivery of one new hydraulic torque wrench, 100,000 foot pounds, 3 and 1/2 inch drive, one hydraulic power unit and two sockets for use at Lower Granite Lock and Dam.

    Notice bac09d36ec2a87bbf60ddc8d54c253bf on SAM.gov

  2. SolicitationJun 17, 2010

    36--SYNOPSIS for supply and delivery of one new hydraulic torque wrench, 100,000 foot pounds, 3 and 1/2 inch drive, one hydraulic power unit and two sockets for use at Lower Granite Lock and Dam.

    Notice 7858a0a7d5146814f346dc2c9d213fd6 on SAM.gov

  3. AwardedCurrentAug 4, 2010

    52--specifications pertain to the purchase of one (1) hydraulic power unit, one (1) torque wrench, and two (2) sockets.

    Notice 7851cd17ca0bc63e5d03cdaa8f1a58a0 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

W912EF10Q0095

Archive Date

Sep 3, 2010