Notice ID: dc92ae1adac0433c9421d71da31fe9ceSolicitation
LaGrange Lock and Dam Phase 1 - NESP - 1200' Lock - Hydraulic Steel Structures and Operating Equipment
Archived on October 1, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−05:00
- Posted
- September 16, 2024
- Notice type
- Solicitation
- NAICS
- 332312: Fabricated Structural Metal Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W07V ENDIST ROCK ISLAND
- Place of performance
- Versailles, IL, 62378
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W912EK24B0019
- Notice ID
- dc92ae1adac0433c9421d71da31fe9ce
Description
9/16/2024: Bid opening held, Summary sheet posted 9/12/2024 - AMENDMENT 0005 POSTED 9/10/2024 - AMENDMENT 0004 POSTED - Updated Drawings 8/27/2024 - AMENDMENT 0003 POSTED - Updated Q&A and Due Date 8/23/2024 - AMENDMENT 0002 POSTED - Updated specs 8/19/2024 - AMENDMENT 0001 POSTED - Update for the specs and plans Please see the attachments for more information. Please pay attention to when questions are due and bids.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Joe Porter
Secondary Contact
Nicholas Moore
Documents
No documents available.
Lifecycle
Solicitation:
W912EK24B0019- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Special NoticeJun 28, 2024
DRAFT - LaGrange Lock and Dam Phase 1 - NESP - 1200' Lock - Hydraulic Steel Structures and Operating Equipment
- Pre-SolicitationJul 3, 2024
PRE-SOL - LaGrange Lock and Dam Phase 1 - NESP - 1200' Lock - Hydraulic Steel Structures and Operating Equipment
- 8×SolicitationCurrentAug 8, 2024
LaGrange Lock and Dam Phase 1 - NESP - 1200' Lock - Hydraulic Steel Structures and Operating Equipment
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
SOURCES SOUGHT NOTICE - KENTUCKY LOCK HYDRAULIC STEEL STRUCTURES HSS FABRICATION AND INSTALLATION. The U.S. Army Corps of Engineers, Pittsburgh District, is conducting market research to identify qualified sources with the capability and capacity to perform fabrication, delivery, installation, and commissioning of hydraulic steel structures for the Kentucky Lock Addition Project in Grand Rivers, Kentucky. NAICS 332312, Fabricated Structural Metal Manufacturing. SEE ATTACHED SOURCES SOUGHT NOTICE FOR THE DETAILED SCOPE, INFORMATION REQUESTED, AND RESPONSE INSTRUCTIONS. This notice is for market research purposes only and is not a solicitation or request for proposal. | 66% | Market Research | 10/30/2026 |
Dear MATOC Contractors: Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, NumbersW911WN23D0001 through W911WN23D0007, to provide varying types of Fabrication of parts and Refurbishment Services for the U.S. Army Corps of Engineers, Great Lakes and Ohio River Mission Boundaries primarily for Civil projects. We request you submit a price proposal for work to be completed in the base bid that includes, but is not limited to, removal of two (2) culvert valve assemblies, fabrication and delivery of two(2) culvert valve assemblies, and installation of two (2) culvert valve assemblies located on the river wall of the main lock chamber (1200 ft chamber) at Cannelton Lock and Dam, Cannelton, Indiana. A culvert valve assembly includes a strut arm, bell crank, culvert valve, pins, valve bearing block assemblies, and other ancillary items as shown on the plans. Items to be removed are highlighted in the plan set. Removal may include the disposal of the culvert valves. See spec02 41 00 DEMOLITION AND DECONSTRUCTION for additional details. Work includes unwatering of the culvert valve chamber, maintaining the unwatered state throughout the duration of the culvert valve installation, and rewatering of the culvert valve chamber. Disclosure of magnitude of construction projects is between $5,000,000.00 and $10,000,000.00.The basis for award of this task order is lowest evaluated price. Offerors shall allow for Government acceptance of proposals for 60 calendar days from the date proposals are due. Any proposal that does not allow acceptance for 60 days will not be considered and will be rejected. Site Visit Please see the Clauses Section, for date and time. No inquiries will be allowed during the site visit. All inquiries must be submitted via the ProjNet Bidder Inquiry site. A Bidder Key is provided with the solicitation information. Please RSVP the following information: The documents are available for download at www.SAM.gov only. All vendors must be registered in the SAM database at www.SAM.gov. The Request For Proposal (RFP) can be found by logging into the website as a vendor and searching for the solicitation number(W912QR-61396929).Proposals are due no later than 11:00 AM EDT on Monday 07 September 2026. Please acknowledge receipt of this RFP by signing below in the space provided. Proposals must be submitted using the Procurement Integrated Enterprise Environment (PIEE)Solicitation Module. *See ELECTRONIC PROPOSAL SUBMISSION for instructions. Proposals not received by the stated date/time will not be considered. All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. The website to access this system is www.projnet.org and the bidder inquiry key for this specific project is: (58UVT3-X47B9H). Please see ProjNet instructions included in this RFP. | 51% | Solicitation | 09/14/2026 |
9/21/2026: USACE posts the Bid Abstract 9/17/2026: Bidders please fill out the Schedule of Prices. We know that a CLIN was left off in Section B, so please disregard filling out that part. The Schedule of Prices is what we will use USACE - Rock Island - This project involves the fabrication and delivery of new bolted Tainter gates for Lock and Dam 21. The work includes the off-site fabrication of tainter gates, measuring approximately 20 feet high by 64 feet long, which are comprised of cold-rolled shapes and welded assemblies. These welded assemblies must comply with AWS D1.1 standards and are designed without fracture-critical members to enhance structural reliability. No amendment: just info on CADD modelPlease contact joseph.e.porter@usace.army.mil for CADD MODEL | 51% | Solicitation | 09/17/2026 |
Solicitation Amendment 0001 to extend response due date to 27 August 2026 at 1:00 PM ETSmithland Locks and Dam Machinery House Cover - Supply | 50% | Combined Synopsis | 08/27/2026 |
The Huntington District Corps of Engineers intends to award a contract for the fabrication of an Auxiliary Chamber Miter Gate for Captain Anthony Meldahl Lock and Dam. The contract will be a Firm Fixed Price Supply Contract. Performance will be the fabrication and delivery of one (1) miter gate two (2) leaves and appurtenant items. The contract will be awarded to the offeror whose proposal conforms to the solicitation and is within a technical/price competitive range, if established, as determined by the contracting officer and has been evaluated as the most advantageous to the Government, all factors considered. All responsive offerors will be evaluated utilizing the following technical factors: Qualifications and Technical Approach, Past Performance, Capabilities and Capacities. Solicitation documents will be available on or about 22 June 2026 online at https://www.sam.gov. To be eligible for contract award, a firm must be registered in the System Award Management (SAM). Register via the SAM website at https://www.sam.gov/portal/public/SAM. Questions may be submitted to Janessa Myers at janessa.k.myers@usace.army.mil. A NAICS Code of 332312 has been established for this solicitation. The size standard is 500. This procurement is a total small business set-aside. | 49% | Awarded | Open |
Additional Details
Solicitation Number
W912EK24B0019
Archive Date
Oct 1, 2024
Office Address
ROCK ISLAND, IL, 61299-5001