CANAVERAL FIBER REINFORCED POLYMER (FRP) SECTOR GATE
Awarded on November 21, 2025. Full description on SAM.gov.
Overview
- Posted
- November 21, 2025
- Notice type
- Award Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 326199: All Other Plastics Product Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION SOUTH ATLANTIC.ENDIST JACKSONVILLE.W074 ENDIST JACKSNVLLE
- Place of performance
- Cape Canaveral, Florida, 32920
- Last updated
- Nov 5, 2026
- First published
- Last updated on SAM.gov
- Award date
- Nov 21, 2025
- Award amount (SAM.gov award notice)
- $9.8M
Identifiers
- Solicitation number
- W912EP26CA006
- Notice ID
- 1602f589a332482cb83a19caa820e738
- Award number (PIID)
- W912EP26CA006
Description
The contract action was both fixed-priced and competitive.
Award Overview
Award Number
W912EP26CA006
Award Amount (SAM.gov award notice)
$9.8M
Award Date
Nov 21, 2025
Awardee
Awardee UEI
PK9NC2USJJX5
Awardee CAGE Code
0JFD9
Awardee Address
Melbourne, FL 32904, UNITED STATES
Line Item Number
0001-0002-0006
Original Solicitation
Notice ID: 1602f589a332482cb83a19caa820e738
Posted Date: Nov 21, 2025
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (16)
- Download
W912EP25R0009 - Amendment 0005 - Specs_Volume_2_AM0004.pdf
134 KBAdded in Solicitation version 9Posted - Download
W912EP25R0009 - Amendment 0005 - Questions and Answers - Part 4.pdf
72 KBAdded in Solicitation version 9Posted - Download
W912EP25R0009 - Amendment 0005.pdf
366 KBAdded in Solicitation version 9Posted - Download
W912EP25R0009 - Amendment 0004 - Clarifications and Responses - 20250902.pdf
77 KBAdded in Solicitation version 7Posted - Download
W912EP25R0009 - Amendment 0004.pdf
850 KBAdded in Solicitation version 7Posted - Download
W912EP25R0009 - Amendment 0003 - Questions and Answers - Part 2.pdf
88 KBAdded in Solicitation version 6Posted - Download
W912EP25R0009 - Amendment 0003 - Volume 2 of 2 - 20250826.pdf
78 MBAdded in Solicitation version 6Posted - Download
W912EP25R0009 - Amendment 0003 - Appendix C - Final.pdf
650 KBAdded in Solicitation version 6Posted - Download
W912EP25R0009 - Amendment 0003.pdf
875 KBAdded in Solicitation version 6Posted - Download
W912EP25R0009 - Amendment 0002.pdf
430 KBAdded in Solicitation version 5Posted - Download
W912EP25R0009 - Amendment 0001.pdf
387 KBAdded in Solicitation version 5Posted - Download
Specs_25R0009AM0001_Amendment0001.pdf
966 KBAdded in Solicitation version 3Posted - Download
W912EP25R0009_Questions_Answers.pdf
113 KBAdded in Solicitation version 3Posted - Download
RFP_Canaveral_Gates_W912EP25R0009_Final.pdf
900 KBAdded in Solicitation version 2Posted - Download
W912EP25R0009_Supply Solicitation and Specifications_Volume 1 of 2.pdf
224 KBAdded in Solicitation version 2Posted - Download
W912EP25R0009_Supply Solicitation and Specifications_Volume 2 of 2.pdf
78 MBAdded in Solicitation version 2Posted
Lifecycle
- 2Version 2SolicitationArchived
CANAVERAL FIBER REINFORCED POLYMER (FRP) SECTOR GATE
- 5Version 5Award NoticeArchivedCurrent
Type changed from Solicitation to Award Notice
CANAVERAL FIBER REINFORCED POLYMER (FRP) SECTOR GATE
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The US Army Corps of Engineers, New Orleans District, Contracting Division is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support the requirement for the Calcaiseu River Saltwater Barrier FRP Tainter Gate. Interested parties are requested to submit a capabilities statement of no more than twenty (20) pages in length. The deadline for response to this request is no later than 1:00 PM, local time, 04 November 2026. All responses under this Sources Sought Notice must be e-mailed to Taylor Brandon, taylor.h.brandon@usace.army.mil and Karen Hargrave, karen.d.hargrave@usace.army.mil. | 78% | Market Research | 11/04/2026 |
Portable Stadium Flooring for the United States Air Force Academy in accordance with the Salient Characteristics. | 55% | Combined Synopsis | 09/29/2026 |
3D-Printed Siloxane Composites with Hydrogen Getter Capability Unwanted hydrogen is a silent threat inside sealed electronics, vacuum instruments and metal containers, where it clouds optics, embrittles metals and can build toward explosive levels. SiloGetter from Los Alamos National Laboratory answers that threat with a printable siloxane composite that captures hydrogen right at its source while carrying nearly 10 times the active getter content of earlier printed materials. Because the paste flows through nozzles as fine as 400 microns without clogging, protection can be shaped precisely to the geometry a device demands, and because the finished part keeps its strength instead of crumbling like a pressed pellet, that protection endures. The result is a rugged, made-to-fit hydrogen safeguard that quietly protects costly systems over the long term while absorbing more than 80% of the hydrogen it encounters. Overview The material relies on a straightforward principle carried out by two ingredients working together. Tiny particles of a palladium-on-carbon catalyst split incoming hydrogen molecules into reactive atoms, and a companion compound, DEB, permanently binds those atoms into its molecular structure so the hydrogen can no longer move or ignite. Both ingredients are dispersed throughout a siloxane polymer, a silicone-like plastic chosen because gases pass through it easily, which gives hydrogen a clear path to the active particles inside. The blended paste is then printed by direct ink writing, a method that pushes the resin through a fine nozzle and stacks it layer by layer into whatever shape the application requires. Once cured, the printed part behaves like a solid, high-surface-area sponge for hydrogen and keeps absorbing steadily until its capacity is reached. Technology Description At the heart of SiloGetter is a reformulated composite resin that resolves the trade-offs that limited earlier printed getters. Previous silicone-based getters could incorporate only about 5 weight percent of the active DEB and palladium-on-carbon getter, and their base resins tended to react with DEB at the temperatures reached during processing, which lowered both hydrogen capacity and mechanical integrity. The new siloxane formulation stays chemically inert toward DEB even at 75 degrees Celsius, so the active chemistry survives fabrication intact; that stability lets the composite carry roughly 50 weight percent getter, a nearly tenfold increase, without sacrificing the strength of the finished part. Equally important is the way the resin behaves during printing. Carefully engineered flow properties allow the high-loading paste to move smoothly through direct-ink-writing nozzles as narrow as 400 microns without clogging, so intricate, high-surface-area shapes can be produced reliably. Because siloxane polymers are highly permeable to gases, hydrogen diffuses readily to the embedded catalyst and getter throughout the printed body rather than only at its surface, and the finished composites absorb more than 80 percent of available hydrogen while retaining good mechanical properties. Taken together, these traits turn a historically fragile, hard-to-handle getter into a robust, customizable component that can be designed directly into the systems it protects. Advantages • Captures far more hydrogen per part, holding roughly 50 percent getter by weight, close to ten times the content of prior printed materials • Prints into custom shapes by direct ink writing, even through nozzles as fine as 400 microns, without clogging • Replaces loose powders and brittle pellets with strong, durable parts that are easy to handle and install • Highly gas-permeable siloxane base gives hydrogen easy access to the active material, yielding better than 80% absorption efficiency • Stable formulation avoids unwanted reactions between the resin and the getter, even at elevated temperature near 75 degrees Celsius • Adaptable to many geometries and uses, so protection can be tailored to each system Market Applications • Microelectronics Packaging (hermetically sealed modules and integrated device packages that outgas hydrogen) • Vacuum and Scientific Instrumentation (ultrahigh vacuum systems and equipment) • Aerospace (metal components exposed to hydrogen-rich conditions) TRL 4 U.S. Patent pending LA-UR-26-27370 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | 55% | Special Notice | 03/02/2027 |
The U.S. Army Corps of Engineers, Rock Island District has a requirement for the fabrication and supply of ten Fiber Reinforced Polymer (FRP) composite structures for Brandon Road Lock and Dam, Joliet, Illinois, Des Plaines River. The gates include (2) 14 X 14 ft filling valves, (2) 14 X 14 ft filling downstream bulkheads, (2) 8 X 8 ft flushing valves, (2) 8 X 8 ft flushing valve bulkheads, and (2) 16 X 16 ft dam headgates. NAICS Code: 326199 Size Standard: 750 employees 100% Small Business Set-Aside - Lowest Price Technically Acceptable A pre-proposal meeting will be held virtually via Microsoft Teams on 29 October 2026, at 2:00 PM CT. Details and access instructions can be found within the solicitation. Questions regarding this solicitation shall be submitted via ProjNet by 2:00 PM CT on 16 November 2026. See MVR.02 in the solicitation for additional information. All solicitation documents are accessible via the link below titled "PIEE Solicitation Module Link for W912EK27RA001." *Pre-proposal Meeting Slides are now included for reference in the Attachments section below. | 47% | Solicitation | 11/30/2026 |
Proposed procurement for NSN 9330014629630 PLASTIC SHEET: Line 0001 Qty 23 UI SH Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0487 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0180 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | 42% | Combined Synopsis | 11/16/2026 |
Additional Details
Solicitation Number
W912EP26CA006
Archive Date
Dec 6, 2025
Office Address
JACKSONVILLE, FL, 32207-0019