GovChime
Notice ID: 8a1205227e5441499d7a4bc2344d400eSources Sought

Kissimmee River Restoration (KRR) Project, S-69 Weir Repair

Responses closed . Full description on SAM.gov.

Overview

Response deadline
10:00 AM EST
Posted
November 2, 2026
Notice type
Sources Sought
NAICS
237990: Other Heavy and Civil Engineering Construction
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION SOUTH ATLANTIC.ENDIST JACKSONVILLE.W074 ENDIST JACKSNVLLE
Place of performance
Okeechobee, Florida
Last updated
Nov 2, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W912EP27Z1CVL
Notice ID
8a1205227e5441499d7a4bc2344d400e

Description

Sources Sought Synopsis


PROJECT TITLE: Kissimmee River Restoration (KRR) Project, S-69 Weir Repair


This is announcement constitutes a Source Sought Synopsis and seeks information from industry which will only be used for preliminary planning purposes. THIS IS NOT A SOLICITATION FOR BIDS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. Respondents will not be notified of the results of the evaluation.


The South Atlantic Jacksonville District of the U.S. Army Corps of Engineers (SAJ) is seeking interest from prospective bidders for a potential fiscal year (FY) 2027 contract award for the subject construction project. SAJ has a requirement for the repair of components of the existing S-69 weir structure inclusive of sheet pile’s concrete cap and ancillary concrete driving slab.


The purpose of this sources sought is to gauge interest, capabilities, and qualifications of contractors that have experience in completing similar projects. The scope of the contract is inclusive of but not limited to (a) partial concrete cap demolition, (b) inspection and cleaning of existing concrete, steel bars, anchor studs and steel sheet piles, (c) preparation of studs and rebar, (d) installation of new closed-loop epoxy coated stirrups routed through the sheet pile and new anchor studs welded to the sheet pile, (e) provision of new expansion joints, (f) repairing of concrete caps with structural concrete, (g) driving slab subsurface void investigation and subsequent repairs to address separation of the slab from sheet pile, and (h) all quality control and construction administration submittals relevant to the construction effort, including as-builts of the final repaired structure.


The proposed project will be a Firm Fixed Price (FFP) contract. The Jacksonville District anticipates the issuance of a Request for Proposal (RFP). No reimbursement will be made for any costs associated with providing information in response to this Sources Sought or any follow-up information requested.


DESCRIPTION OF WORK:
The S-69 Weir consists of driven sheet pile walls with a concrete cap that acts as a weir and is a key feature of the Kissimmee River Restoration (KRR) Project. Located in Okeechobee and Highlands Counties, Florida, the weir’s primary function is to restore the Kissimmee River’s floodplain hydrology to pre-canal conditions by controlling water stages and discharges into the C-38 canal.


Repair of components of the existing S-69 weir structure require sheet pile concrete cap and driving concrete slab. Anticipated work includes but is not limited to: concrete removal portions of the cap, addition of new reinforcement steel closed stirrups, welding of anchor studs, providing expansion joint material, casting-in-place new structural concrete, assessment of voids underneath the driving slab through concrete coring and grouting of cored holes, and filling of gaps between the slab and cap with Controlled Low Strength Material (CSLM) or equivalent approved flowable fill.

The overall project site components encompass work to done at the following approximate location: 27.334767, -81.032830; very close to the “Chandler Slough South Trailhead”.


Specific project components include the following items and incidental related work; refer to conceptual plans for further information:


Concrete Cap Repair
1. Concrete Cap Partial Demolition at Expansion Joints
a. At 29 expansion joint locations, demolish 36” of concrete cap on each side of expansion joint. Existing rebar and sheet pile studs to remain.

2. Inspection and Cleaning of Existing Concrete, Steel Bars, Anchor Studs, and Steel Sheet Piles prior to new repair.
a. Use blast cleaning techniques for steel. Demolish concrete beyond the 36” footprint if concrete material is weak and unsuitable.

3. Drilling/Burning of holes into sheet pile to allow for closed stirrups to pass through.
a. Drill or burn 2-inch diameter holes to allow installation of closed-hoop steel stirrups.

4. Welding of new anchor studs to sheet pile.
a. Anchor stud size is 1/2"(diameter) x 4”
5. Preparation of Studs and Rebar (Coating) prior to new repair

a. Apply inorganic zinc-based primer for all existing rebar as well as both existing and new studs (coating to be applied after welding).

6. Installation of new #5 closed-loop epoxy-coated stirrups at 6” on-center, with the bottom leg routed through the sheet pile.
a. First stirrup must be 3” from expansion joint, all others to follow the spacing requirement.

7. Provision of new expansion joints.
a. Expansion joint thickness must be increased to 2”. Use Class 50 system, with ASTM C920 elastomeric sealant rated for at least 50% movement an documented as suitable for the anticipated weather and ultraviolet exposures, temperature range, and substrate conditions.

8. Repair of concrete cap using structural cast-in-place concrete (f’c = 4,500 psi).
a. Concrete quality, placement, consolidation, and curing procedures per plans and specifications will be strictly monitored by both Contractor QC and Government QA personnel.

Ancillary North Driving Slab Repair
1. Coring layout and investigation of potential subsurface voids
a. Core drill 20 cores into the slab from approximately STA 23+80 to 25+20 (centered about the primary area of concern near STA 24+50). Cores will be spaced at approximately 20-foot intervals and positions 2 to 5 feet from the inner wall to characterize conditions directly adjacent to the gap. Core drill new cores spaced at approximately 40-foot intervals along the remainder of the Northern leg.
b. Investigate cored areas for voids underneath the slabs. Coordinate with the Government for any adverse conditions found.
c. Fill all core holes with non-shrink grout after Government inspection.

2. Repair of separated slab at North leg of weir.
a. The 3-inch separation as indicated in concept drawings and all other voids must be filled with Controlled Low Strength Material (CLSM) or an approved flowable fill.

3. Repair of slab’s expansion joints
a. Expansion joints of the driving slab must be mechanically routed or scraped out, joint faces cleaned and prepared, new closed-cell backer rod installed to achieve the proper depth-to-width ration, and heavy-duty, UB-resistant elastomeric joint sealant applied.

Construction Submittals and As-Builts
1. Providing quality control and all required submittals during construction, which includes but is not limited to, the void investigation report, concrete mix design, and all product data.

2. Providing as-built documentation once repair is completed.

ROUGH ORDER OF MAGNITUDE: $500,000 to $1,000,000

PRODUCT SERVICE CODE: Z2KA – REPAIR OR ALTERATION OF DAMS

NAICS CODE: The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 237990 - Other Heavy and Civil Engineering Construction.

SMALL BUSINESS SIZE STANDARD: $45,000,000

The anticipated period of performance is 90 calendar days after receipt of the Notice to Proceed (NTP).

SUBMISSION REQUIREMENTS:
Responses to this Sources Sought shall be limited to 5 pages and shall include the following information:
1. Company/Contractor name, address, point of contact, phone number and e-mail address.

2. Company’s interest in bidding on the subject requirement when issued.

3. Company’s capability to perform a work of this magnitude and complexity (include company’s capability to execute comparable work performed within the past 10 years), within an area of similar remoteness. Company should provide at least 3 examples which, at a minimum, include the following:
a. Brief description of the project
b. Customer name
c. Customer satisfaction
d. Timeliness of performance
e. Dollar value of the completed projects

4. Offeror shall identify their Small Business classification and Small Business Size:
a. Small Business
b. Small Disadvantage Business
c. 8(a) Small Business
d. HUBZone
e. SDVOSB
f. WOSB

5. If significant subcontracting or teaming is anticipated in order to deliver technical capability, firms should address the structure of such arrangement include Joint Venture information, if applicable – existing and potential.

6. Bonding Capacity (construction bonding level per contract and aggregate construction bonding level, both expressed in dollars) via letter from the bonding company.
 

NOTES:
DO NOT SUBMIT A RESPONSE TO THIS SOURCES SOUGHT IF YOU DO NOT INTEND TO BID ON THIS PROJECT.
DO NOT SUBMIT PROPRIETARY AND/OR BUSINESS CONFIDENITAL DATA.
SUBMISSION INSTRUCTIONS:


Interested parties who consider themselves qualified to perform the work associated with the subject requirement, are invited to submit a response to this Sources Sought Notice no later than November 09, 2026, at 10:00 AM, EST. All responses under this Sources Sought Notice shall be sent to Ms. Tedra Thompson via email at tedra.n.thompson@usace.army.mil and Mr. William Wallace via email at: william.j.wallace@usace.army.mil. 


Prior Government contract work is not required for submitting a response under this sources sought synopsis.

You must be registered in the System for Award Management (SAM), in order to be eligible to receive an award from any Government solicitation. To register, go to www.sam.gov. For additional information visit the website for the Federal Service Desk (www.FSD.gov) which supports SAM or contact them at 866-606-8220 for assistance.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • Combined S-69 Weir Concept Drawings (Draft).pdf

    951 KBAdded in Sources Sought version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    Kissimmee River Restoration (KRR) Project, S-69 Weir Repair

    Notice 8a1205227e5441499d7a4bc2344d400e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Amendment 0004 adds Provision 52.228-1 (Bid Guarantee) and extends the Solicitation close date to Friday 23 October 2026 at 14:00 CST. Amendment 0003 is posted to allow Offerors ample time to review responses to Projnet questions Offers are due on or before 14:00 October 20, 2026. Amendment 0002 is posted to identify minor changes to the statement of work (SOW) and to move the submission date to, on or before, 13 October 2026 at 2:00 P.M. CST. Posted changes are identified in the SOW v3 dtd 09/30/26 in red font and the submission date change is to provide vendors appropriate time to make applicable adjustments to submissions. The site visit attendee list is also provided in this amendment. Solicitation for the repair, reconstruction, and modernization of the Damsite Park wastewater lagoons at Fall River Lake. The objective is to restore structural integrity, prevent environmental seepage, and ensure full compliance with USACE and State of Kansas environmental regulations at Fall River Lake and Dam in Fall River, Kansas. U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a commercial contract from solicitation W912BV26Q95 for the Damsite Park Lagoon Repair. The North American Industrial Classification System (NAICS) Code is 237990. The resulting contract will be issued on a Firm-Fixed Price basis, to the responsible offeror whose quote is conforming to the requirements of the solicitation and will be most advantageous to the Government considering price, past performance, and conformance with sub-contracting regulations. The anticipated award date is on or about 15 October 2026. The solicitation will be issued via Internet on the PIEE website at https://piee.eb.mil/. It is the responsibility of the contractor to monitor the above-listed internet address for any posted changes. All amendments posted shall be signed and submitted with the quote. Quotes are anticipated to be due on or before 13 October 2026 by 2:00 PM Central Time (CST). Contractors must have an active registration in the System for Award Management (SAM) at time of quote in order to receive a government contract award. SAM registration must also be active at time of award in order to receive a government contract award. SAM registrations shall remain active throughout contract performance to comply with the annual representations and certifications requirements. To register, the SAM.gov Internet address is: https://sam.gov/. Please NOTE this solicitation requires offerors to enter a National Institute of Standards and Technology (NIST) score in the Supplier Performance Risk System (SPRS). The NIST score is a responsibility item. Those without a NIST score will be deemed NON-RESPONSIBLE and will not be eligible for award. QUESTIONS AND INQUIRIES BIDDERS INQUIRY Any questions and inquiries related to this solicitation shall be submitted through Bidders Inquiry. Please visit www.projnet.org to submit your inquiries. The Solicitation Number is: W912BV26QA095 The Bidder Inquiry Key is: WFTAEB-RREB2U The Bidder Inquiry System is anticipated to be unavailable for new inquiries after 2:00 p.m. on 08 October 2026 to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.
77%
Solicitation10/20/2026
Keystone Tainter Gate Repairs, at Keystone Dam, Sand Springs, Oklahoma. *AM0001 - This Amendment is to provide pre-proposal site visit details.*AM0002 - This Amendment is to provide 2nd pre-proposal site visit details and extend the proposal due date. *AM0003 - This Amendment provides a revised Section 01 14 00 WORK RESTRICTIONS, Bathymetric Survey as Appendix A to the specifications, Boring Logs as Appendix B to the specifications, and additional reference drawing sheets. Clause 52.228-1 is also updated. Please review attachments for full details. *AM0004 - This amendment is to provide reference drawing sheets in response to bidders inquiries. *AM0005 - This amendment is to provide corrections to section 00 22 11.
72%
Solicitation03/16/2026
The U.S. Army Corps of Engineer (USACE) Portland District is soliciting construction firms who are interested in submitting a competitive firm-fixed-price bid for this project. This solicitation announcement is for the repair and rehabilitation of one Tainter Valve (TV1) at The Dalles Lock and Dam (TDA). See the attached Solicitation, which includes the Specifications, and the attached Plan set for all details. The following site visit on Tuesday, 03 November 2026: 2:00 P.M. @ The Dalles Dam (Washington side), Lyle, WA 98635. Take US-197N and exit towards The Dalles Dam Boat Launch and park on the left hand side of the road immediately after turning left 90 degrees towards the Boat Launch; see the attached link up location map. Contractors will be able to see a removed Tainter Valve at The Dalles Dam. Send an email to Andrew Sprys and Justin Figueredo by 11:00 A.M. on Thursday, 29 October 2026, with the following information to register for the site visit: Solicitation Number: W9127N27BA010, Project Title: THE DALLES DAM NAVIGATION LOCK TAINTER VALVE (TV) REPAIRS TV1, Name(s) of individual(s) attending site visit, Name of Company, Phone Number, Email Address, Are all individuals U.S. Citizens? Participants of the scheduled site visit must abide by the U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1, latest version) in accordance with Section 5, Personal Protective and Safety Equipment. It is the responsibility of the participants to wear personal protective and safety equipment as required by this regulation. Failure to comply could result in denial of access to site visit location. Site visit attendees must be U.S. citizens and possess a REAL ID to access the sites. Any subsequent visits will require prearrangement with the Contracting Division personnel listed above and may not be guaranteed/approved. Acceptable forms of proof of citizenship for anyone born outside the USA is: 1. US Birth Certificate: Must be certified and issued by either a US State or the US State Department. 2. US Passport Undamaged: Issued by the US Dept of State, without limitation, does not need to be current, is/was valid for 10 years for adults and 5 years for children under 16. 3. US Passport Card Undamaged: Issued by the US Dept of State, without limitation, does not need to be current. 4. US Certificate of Citizenship: Issued by US Citizenship and Immigration Service. 5. Consular Report of Birth Abroad: Issued by the US State Department. 6. US Naturalization Certificate: Issued by US Citizenship and Immigration Service. 7. Enhanced Drivers License: from Michigan, Minnesota, New York, Vermont, or Washington. Acceptable ID: 1. Real ID drivers license. 2. Enhanced drivers license. 3. Federal Identification Cards PIC/CAC/PIV/Etc. 4. Transportation Worker Identification Card (TWIC). 5. United States Passport or United States Passport Card. 6. Drivers license issued by the Department of State. Magnitude of Construction: The estimated cost of the project is between $1,000,000 to $5,000,000. Cybersecurity Maturity Model Certification (CMMC) level: The CMMC level anticipated for this requirement is CMMC Level 1 (Self). This CMMC level, or higher (see 32 CFR part 170), will be required prior to award and maintained for the duration of the contract for each contractor information system that will process, store, or transmit Federal contract information (FCI) or controlled unclassified information (CUI) during performance of the contract. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION EITHER BEFORE OR AFTER THE RESPONSE DATE AND TIME. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS SOLICITATION OR ANY FOLLOW-UP INFORMATION REQUESTS.
71%
Solicitation11/30/2026
This is a SOURCES SOUGHT SYNOPSIS and is not a solicitation announcement. The purpose of this Market Research and Sources Sought Notice is to gain knowledge of potential qualified Small Business, HUBZone, 8(a), Service Disabled Veteran owned, and Women owned Small Business firms. Responses to this Sources Sought Synopsis will be used by the government in making appropriate acquisition decisions. The intended work falls under NAICS code 237990, Other Heavy and Civil Engineering Construction. The U.S. Army Corps of Engineers, Mobile District, anticipates a requirement for a firm-fixed-price construction contract to perform structural concrete and gate repairs on the spillway at the Carters Reregulation Dam located in Chatsworth, Georgia. The purpose of this project is to perform concrete rehabilitation and retrofit existing structural elements that have been impacted by concrete expansion due to Alkali-Silica Reactivity (ASR). The scope of work includes, but is not limited to: structural concrete demolition of existing pier stoplog slots; installation of new steel stoplog guides and embedded seal plates; placement of specialized shrinkage-compensating concrete; and recessing of side seal plates. Additional mechanical and structural work includes replacing side and bottom seals on four (4) Tainter gates and replacing seals on eight (8) stop logs. The contractor will be fully responsible for the design, fabrication, and installation of Temporary Dewatering Structures (TDS)/cofferdams and temporary gate support shoring. To maintain operational continuity, construction must be executed sequentially, allowing only one gate bay to be dewatered and out of service at any given time. The estimated magnitude of construction is between $5,000,000 and $10,000,000, with an anticipated performance period of approximately 180 calendar days. Responses are requested with the following information, which shall not exceed a total of eight pages. 1. Offeror name, address, points of contact with telephone numbers and e-mail addresses. 2. Business size/classification to include any designations as Small Business, 8(a), HUBZone, Service Disabled Veteran Owned and Women-Owned Small Businesses shall be indicated on first page of submission. 3. Bonding capability: construction bonding level per single contract and aggregate construction bonding level, both expressed in dollars; along with current available bonding capacity. 4. Description of your capability to perform the specialized work described above, manage subcontractors, secure and comply with environmental permits, and safely execute Dam and hydraulic Steel structures (HSS) construction. Specifically address your capacity and proposed approach to designing, fabricating, and installing Temporary Dewatering Structures (TDS) and tainter gate shoring systems. 5. Past performance and experience on up to three (3) projects of similar scope, complexity, and value completed within the past five (5) years, or at least 50% construction complete. Relevant experience includes: structural concrete demolition, specialized concrete placement (such as shrinkage-compensating concrete under strict curing/testing protocols), stainless steel structural embed/guide fabrication and welding, Tainter gate seal replacement, and work with USACE Hydraulic Steel Structures within the civil works branch. For each project, provide the title, location, general description of the scope, contract value, role (Prime or Subcontractor), and client contact information (name, phone, and email). NO RESPONSES WILL BE ACCEPTED BY FAX OR MAIL. ALL RESPONSES MUST BE E-MAILED to: Jeffrey M. Donaldson at Jeffrey.M.Donaldson@usace.army.mil. Submittals are due no later than 20 October 2026 at 2:00 PM CDT. Telephonic responses will not be honored. This is not a Request for Proposal, only a Request for Information. No award will result from this Sources Sought. This notice does not constitute any commitment by the Government.
71%
Market Research10/20/2026
Contract Award for Webbers Falls Tainter Gate Replacement and Repair.
71%
AwardedOpen

Additional Details

Solicitation Number

W912EP27Z1CVL

Archive Date

Nov 24, 2026

Office Address

JACKSONVILLE, FL, 32207-0019