Notice ID: bb88a6a78faf4c25b6b41de1098d2907Solicitation
Sheaves
Archived on December 23, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−06:00
- Posted
- November 17, 2021
- Notice type
- Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 333613: Mechanical Power Transmission Equipment Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W07V ENDIST MEMPHIS
- Place of performance
- Memphis, TN, 38119
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W912EQ22Q0007
- Notice ID
- bb88a6a78faf4c25b6b41de1098d2907
Description
The Memphis District USACE has a requirement for sheaves for the Dredge Hurley. All sheaves must be in accordance with the attached solicitation.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W912EQ22Q0007- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
******************FOR INFORMATIONAL PURPOSES ONLY--THIS IS NOT A SOLICITATION************* *********************************************************************************************************************** PROJECT DESCRIPTION: The Nashville District, U.S. Army Corps of Engineers, intends to issue a Request for Quote (RFQ), for the fabrication and delivery for one (1) set of replacement components associated with the lower miter gate operating machinery at Pickwick Lock, Counce, TN 38326. The specifications will be provided with the solicitation announcement and the solicitation post date is TBA. The intended delivery date is 365 calendar days after contract award. NAICS CODE AND SBA SIZE STANDARD: 333612 with a size standard of 750 employees. TYPE OF SET-ASIDE: 100% Total Small Business Set-aside | - | Pre-Solicitation | Open |
Salient CharacteristicsRequired Product Characteristics, brand-name-or-equal as follows:The contractor shall furnish new, unused, commercially available steel mill products meeting the material specification/grade, product form, nominal dimensions, length, and quantity stated for each Contract Line-Item Number (CLIN).Furnished products shall be free from material defects that would affect their intended use. Used, reclaimed, repaired, remnant, or substitute-grade material is not acceptable.Dimensions are nominal. Unless a tighter tolerance is expressly stated in the CLIN, material shall conform to the standard commercial tolerances applicable to its governing material specification and product form.The offeror shall identify, by CLIN, the offered manufacturer or mill/distributor; material specification and grade; product form; nominal dimensions; and any exception to this purchase description. Any exception shall be clearly identified in the quotation.Substitution of a different material grade, product form, or smaller nominal dimension is not permitted without prior written authorization by the Contracting Officer.Documentation: The contractor shall provide a certificate of conformance identifying the material specification and grade for each CLIN. [Use this sentence only if the requiring activity has a documented need: The contractor shall also provide a mill test report traceable to the delivered heat/lot.]The offered products shall meet all of the following Government-validated salient characteristics:CLIN 0001 - Thin-section bearingReference item: Kaydon Bearings JG180XP0Quantity: 6 each.Furnish six (6) thin-section bearings, brand name or equal to Kaydon Bearings JG180XP0. Each offered bearing shall be new, current production, unused, and free from defects.Offerors proposing an equal product shall submit manufacturer datasheets and a completed compliance crosswalk demonstrating compliance with each salient characteristic.CLIN 0002 - Right-hand female rod endReference item: QA1 Precision CFR8T, described as [right hand Teflon female rod end,] same as CTFD-8Quantity: 3 each. Furnish three (3) self-lubricating female rod ends, right-hand thread, brand name or equal to QA1 Precision CFR8T / CTFD-8 reference configuration. Each unit shall be new and unused.Female rod-end configuration with right-hand threaded shank.Self-lubricating PTFE/Teflon-lined spherical bearing surface, or equivalent self-lubricating liner approved by the requiring activity.CLIN 0003 - Rod endReference item: QA1 Precision CMR8T, described as [rod end,] same as CTMD-8.Quantity: 3 each. Furnish three (3) rod ends, brand name or equal to QA1 Precision CMR8T / CTMD-8 reference configuration. Each unit shall be new and unused.CLIN 0004 - Retaining ringReference item: Rotor Clip SE-98, described as [STZD RET RING].Quantity: 6 each. Furnish six (6) standardized retaining rings, brand name or equal to Rotor Clip SE-98 reference configuration. Each retaining ring shall be new and unused.CLIN 0005 - Roller chainReference item: Diamond Chain DMD-60-1R, 100-foot roll including master link.Quantity: 600 feet. Furnish six hundred (600) feet of single-strand roller chain, supplied in 100-foot rolls, with one compatible master/connecting link included with each roll; brand name or equal to Diamond Chain DMD-60-1R reference configuration. Chain shall be new, unused, and suitable for the Governments identified equipment/application.Single-strand roller-chain configuration.Nominal chain series/size: No. 60 or Government-approved equivalent dimensional series.Master/connecting link shall match the offered chain series and shall not reduce the stated load rating.Supplied lengths shall be continuous 100-foot rolls; no substituted partial lengths unless specifically authorized by the CO.CLIN 0006 - Stainless-steel swivel jointReference item: OPW 3750-0151, described as [1-1/2 inch NPT, SS swivel joint.]Quantity: 6 each. Furnish six (6) stainless-steel swivel joints, brand name or equal to OPW 3750-0151 reference configuration. Each swivel joint shall be new, unused, and complete with all components required for installation.Nominal connection size: 1-1/2 inch NPT.Product identification and technical compliance. Offerors shall identify the manufacturer, manufacturer part number, country of origin when required by the solicitation, and place of manufacture when required. For an offered equal product, the offeror shall provide manufacturer technical literature and a completed compliance crosswalk addressing each salient characteristic.Government review. Failure to provide sufficient information to establish compliance with all salient characteristics may render the quotation ineligible for award.Condition. Supplies shall be new, current production, and free from defects; used, refurbished, remanufactured, surplus, gray-market, or counterfeit items are not acceptable unless expressly authorized in writing by the solicitation.Inspection and acceptance. The Government will inspect supplies for quantity, condition, identity, documentation, and conformance with the solicitations stated characteristics. The Governments acceptance is not waived by a vendors commercial terms or disclaimers. | - | Combined Synopsis | 11/13/2026 |
The U.S. Army Corps of Engineers, Memphis District has a requirement for track loader. The solicitation number is W912EQ27QA002 and is being issued as a Request for Quote (RFQ). This is a total small business set-aside procurement. The associated NAICS code is 333120. Response to this solicitation must be received via email by date and time indicated on solicitation; regardless of method of delivery, it is the offerors responsibility to ensure receipt of quote by the time and date stated therein. Quotes should be marked with solicitation number W912EQ27QA002 addressed to LaTasha Martin, Phone (901) 544-3037, email: Latasha.N.Martin@usace.army.mil or Kirk A. Middleton, Phone (901) 544-0786, Kirk.A.Middleton@usace.army.mil. Vendors not registered in System for Award Management Registration (SAM) database prior to award will not be eligible for award. Vendors may register for SAM by registering online at www.sam.gov. In accordance with FAR 52.204-7, all vendors shall be registered in System for Award Management (SAM) prior to award, during performance and through final payment of any contract. North American Industry Classification System (NAICS) Code applicable (333120) to this acquisition must be in vendors SAM registration. | - | Solicitation | 11/25/2026 |
**The purpose of this amendment is to extend the solicitation response date to Friday 6 November 2026 at 1pm CST and confirm the delivery address.** The Plant Section located at Ensley Engineer Yard is purchasing an electric-powered man lift for use at WG Huxtable Pumping Plant. | - | Solicitation | 11/06/2026 |
The purpose of this amendment is to extend RFQ due date to 11/13/2026, change delivery dates and correct the size of the couplers. The Plant Section located at Ensley Engineer Yard is purchasing two (2) Diesel-powered trash pumps and accessories. | - | Solicitation | 11/13/2026 |
Additional Details
Solicitation Number
W912EQ22Q0007
Archive Date
Dec 23, 2021
Office Address
MEMPHIS, TN, 38103-1894