GovChime
Notice ID: 74dd01d811434cd0b25ab6d2c7167030Solicitation

Induction Heater

Archived on September 20, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−06:00
Posted
August 9, 2023
Notice type
Solicitation
NAICS
333992: Welding and Soldering Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W07V ENDIST MEMPHIS
Place of performance
Memphis, 38109
Last updated
Dec 6, 2025

Identifiers

Solicitation number
W912EQ23Q0031
Notice ID
74dd01d811434cd0b25ab6d2c7167030

Description

The Memphis District USACE has a requirement for an Induction Heater for our Metals Unit. Please see the attached solicitation for additional details.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W912EQ23Q0031
  1. Solicitation
  2. Combined Synopsis

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Combined SynopsisApr 28, 2023

    Induction Heater

    Notice 946c9d81ff8f4ed58691bc9eb178ce89 on SAM.gov

  2. SolicitationCurrentAug 9, 2023

    Induction Heater

    Notice 74dd01d811434cd0b25ab6d2c7167030 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
72%
SolicitationOpen
AMENDING TO CORRECT CLOSING DATE FOR MILLER DYNASTY 800 WELDER PACKAGE
68%
Combined Synopsis08/18/2026
Reason for amendment is to add and edit salient characteristics - Orbital Welding Power Supply
68%
Combined Synopsis03/02/2026
Linear Welder Control System
68%
Combined Synopsis02/20/2026
MIG WELDER PACKAGE 3) General RequirementsThis section provides the specification requirements for the Welding Machine Package. Note: Every item listed in this section shall be accounted for in the offeror?s proposal for it to be considered (see section 6.).a) System shall meet all applicable OSHA standards and regulations.b) Vendor Shall ensure All Components of the system are compatible. c) Power supply shall have a minimum duty cycle of 100% at 36volts/400 amps.d) Machine Shall be compatible with 480-volt 3 phase power.e) System Shall be able to do the following processes,1. Shielded Metal Arc Welding (SMAW)2. Direct Current Gas Tungsten Arc Welding (DC GTAW)a. High Frequency Startb. Lift Arc3. Gas Metal Arc Welding (GMAW)4. Pulse Gas Metal Arc Welding (GMAW-P)5. Flux Core Arc Welding (FCAW)f) The wire feeder shall be a dual wire setup.1. The Wire feeder shall have a minimum duty cycle of 100% at 100 volts/600 amps.2. The Wire feeder Shall include spool covers for 33lb wire spools.3. The Wire feeder Shall include 2, 15ft (min) 300amp Mig gun assemblies.4. The Wire feeder Shall be compatible with ?Miller style? power pins on the Mig gun assemblies.5. Wire feeder control cable and weld power cable Shall be included.6. 25 ft work sense lead shall be included.7. Vendor Shall include Feeder drive roll kits of the following sizes (Dual size reversable are acceptable).a. .035 V-Grooveb. .045 V-Groovec. .062 V-Groove8. Vendor Shall include Wire Guides of the following sizes.a. .035b. .045c. .062g) System Shall include a wireless remote foot controller.1. Wireless foot control Shall accept ?AA? size batteries.2. Vendor Shall provide batteries to fill the controller not less than 2 times.h) System Shall include a heavy-duty foot control pedal with 20ft of cord.i) System Shall Include 2 Sheild Gas Flow meter regulators.j) System Shall include 2 gas hoses (4ft min).k) Machine must include a cooler.1. Cooler must be removeable for service/repair.l) Machine must have dedicated Tig Torch Connection.m) Machine must have dedicated Tig Gas hose Connection.n) Machine must have dedicated Tig Remote Connection.o) Machine must have dedicated Stick Connection.p) Machine must have dedicated Work cable Connection.q) Running Gear/Cart Shall be included.1. 2 brackets to stow the foot controls Shall be included.r) 25 ft(min) Work Lead Shall be included.
68%
Combined Synopsis01/22/2026

Additional Details

Solicitation Number

W912EQ23Q0031

Archive Date

Sep 20, 2023

Office Address

MEMPHIS, TN, 38103-1894