GovChime
Notice ID: 95bfe7e0a2c841b3ab6842fc549beb37Combined Synopsis/Solicitation

Double-Drum Winches

Archived on September 30, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−05:00
Posted
August 1, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W07V ENDIST MEMPHIS
Last updated
Sep 25, 2026

Identifiers

Solicitation number
W912EQ24Q0058
Notice ID
95bfe7e0a2c841b3ab6842fc549beb37

Description

The Memphis District USACE has a requirement for five (5) hydraulic-driven double drum waterfall winches with diesel-hydraulic power unit systems. The winches need to be suitable for operation in a marine environment, with features comparable to those of AmClyde Frame 8 two-drum winch system. The winches should also be able to hold 1000 feet of 1-1/8 inch cable on upper and lower drums and between 6,000-8,000 lb. anchors on the starboard and port sides of the barge. ALSO, Please NOTE this solicitation requires offerors to enter a National Institute of Standards and Technology (NIST) score in the Supplier Performance Risk System (SPRS) prior to responding to this solicitation. The NIST score is a responsiveness item. Bids/offers from contractors with a NIST score in SPRS will be considered responsive and evaluated/considered for award. Those without a NIST score in SPRS will be deemed NON-RESPONSIVE and thus not evaluated/considered for award. For any questions regarding this solicitation, contact Rochelle Ross at rochelle.ross@usace.army.mil.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:W912EQ24Q0058
  1. Combined Synopsis
  1. Combined SynopsisCurrentAug 1, 2024

    Double-Drum Winches

    Notice 95bfe7e0a2c841b3ab6842fc549beb37 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Low Level Cranes
68%
Solicitation11/30/2026
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
68%
Combined Synopsis11/13/2026
Low Level Cranes
68%
Solicitation10/06/2026
Hoist Stand
68%
Combined Synopsis09/24/2026
The purpose of this Sources Sought is to gain knowledge of interest, capabilities, and qualifications of firms that possess the expertise to successfully complete and perform the requirements described herein. Furthermore, this effort seeks to address any questions, recommendations, or concerns from Industry. The information gathered will assist the Government in ensuring there is adequate competition among a potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this announcement. Please refer to the attached Sources Sought documentation for the updated details of this action. The Capabilities Statement requested for this Sources Sought is not intended to be a Request for Proposal (RFP) nor an Invitation for Bid (IFB), nor does it restrict the Government to an ultimate acquisition approach. It is intended to request statements that thoroughly demonstrate interested companies existing expertise and experience (or developed plans for such) in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may be submitted alongside the Capabilities Statement. Submission of a Capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the U.S. Army Corps of Engineers in tailoring requirements to be consistent with industry capabilities. This announcement is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. All interested contractors should submit responses via email by 1000 hours Eastern Daylight Time (EDT) on 22 Sep 2026. Submit responses and information to Elena.N.Shapovalova@usace.army.mil and Eric.L.Caruso@usace.army.mil. No hard copies will be accepted. Amendment 0001 to the Sources Sought Notice is issued to revise Item 4, Acquisition Information/Project Description.
68%
Market Research09/22/2026

Additional Details

Solicitation Number

W912EQ24Q0058

Archive Date

Sep 30, 2024

Office Address

MEMPHIS, TN, 38103-1894