GovChime
Notice ID: 8acf72186be1743fe1d210a332fbf12dAward NoticeAwarded

Load Handling Equipment Inspections

Awarded on June 1, 2018. Full description on SAM.gov.

Awarded tounder W912ES18P0075 (source: SAM.gov award notice)• $51.1K

Overview

Posted
August 23, 2018
Notice type
Award Notice
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W07V ENDIST ST PAUL
PSC
H: QUALITY CONTROL, TEST, INSPECTION
Last updated
Sep 25, 2026
Award date
Jun 1, 2018
Award amount (SAM.gov award notice)
$51.1K

Identifiers

Solicitation number
W912ES18T0066
Notice ID
8acf72186be1743fe1d210a332fbf12d
Award number (PIID)
W912ES18P0075

Description

Perform a load test and inspection on the crane/lifting devices listed on the Lock and Dam Lifting Devices table. Cranes and lifting devices shall be tested and inspected in accordance with US Army Corps of Engineers Safety and Health Requirements Manual EM 385-1-1 dated 30 Nov 2014, applicable ASME standards, OSHA regulations, and the manufactures recommendations. The required completion date is 120 days after award. EM385-1-1 is available at the following internet site: http://140.194.76.129/publications/eng-manuals/em385-1-1/2008_English/toc.html

Full description on SAM.gov

Award Overview

Award Number

W912ES18P0075

Award Amount (SAM.gov award notice)

$51.1K

Award Date

Jun 1, 2018

Awardee

Original Solicitation

Notice ID: 8acf72186be1743fe1d210a332fbf12d

Posted Date: Aug 23, 2018

Original Response Deadline: Not specified

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Shamron Richardson
Contracting Officer

Documents

No documents available.

Lifecycle

Solicitation:W912ES18T0066
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. 2×
    Combined SynopsisApr 24, 2018

    Load Handling Equipment Inspections

    Notice 0c20e4e3db530f11435f2de79aa55654 on SAM.gov

  2. AwardedCurrentAug 23, 2018

    Load Handling Equipment Inspections

    Notice 8acf72186be1743fe1d210a332fbf12d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
Low Level Cranes
-Solicitation11/30/2026
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
-Combined Synopsis11/13/2026
Hammar Spreader Beam
-Combined Synopsis11/12/2026
Low Level Cranes
-Solicitation10/06/2026

Additional Details

Solicitation Number

W912ES18T0066

Archive Date

Aug 24, 2018

Office Address

SAINT PAUL, MN, 55101-1323