Notice ID: 313a0088fcae4fe2ad6bb056c91b6f71Combined Synopsis/Solicitation
Laboratory Tests of Soil – IDIQ Contract
Archived on June 7, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM UTC−05:00
- Posted
- May 19, 2023
- Notice type
- Combined Synopsis/Solicitation
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W07V ENDIST ST PAUL
- Place of performance
- Saint Paul, 55101
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W912ES23Q0052
- Notice ID
- 313a0088fcae4fe2ad6bb056c91b6f71
Description
The Contractor will be required to perform a variety of laboratory testing on samples provided by the US Army Corps of Engineers (USACE), St. Paul District (MVP). The samples will include jar samples and undisturbed tube samples (5-inch or 3-inch samples). Samples may also include bag or bucket samples, which are typically collected for density testing or for tests on reconstituted (i.e. laboratory compacted) samples. Each sample will include information pertaining to its soil boring number, sample number, depth and location. The tests and ASTM standards are in Table 1 of the solicitation. All laboratory testing facilities shall be validated by the U.S. Army Corps of Engineers Engineering Research and Development Center’s Material Testing Center (MTC) to ensure compliance with Engineering Regulations 1110-1-8100 (Laboratory Investigations and Testing) and 1110-1-261 (Quality Assurance of Laboratory Testing Procedures). Please include the address of ALL ERDC MTC certified labs operated by your firm, located within the St. Paul District geographic territory (portions of MN, WI, ND, SD, IA) in your offer. Offeror must have a lab within 50 miles of the USACE St. Paul District Office to be considered for award. This IDIQ contract will be awarded on a Best Value to the Government basis. See provision 52.212-2 for more information on evaluation criteria used. This solicitation is UNRESTRICTED - Full & Open Competition. Entities of any size are invited to submit offers. AMENDMENT 0001 HAS BEEN ADDED - This amendment extended the solicitation close time and date, and added additional tests to the PRICING schedule. Please complete the Pricing Schedule and submit as your quote. The schedule will be used to compare pricing based on estimated and historical testing quantities. AMENDMENT 0002 HAS BEEN ADDED - This amendment updated clause 52.216-9 "Order Limitations" and established the contract minimum guarantee and contract maximum value.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Kenneth J. Eshom
Documents
No documents available.
Lifecycle
Solicitation:
W912ES23Q0052- Combined Synopsis
- 3×Combined SynopsisCurrentApr 21, 2023
Laboratory Tests of Soil – IDIQ Contract
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Please see Attached Solicitation for Performance Work Statement. | 82% | Awarded | Open |
Please see Attached Solicitation for Performance Work Statement. | 82% | Solicitation | 01/27/2026 |
Army Test, Measurement and Diagnostic Equipment (TMDE) CALIBRATION SERVICE | 61% | Solicitation | 07/10/2026 |
Laboratory Testing Services - 5-year contract (base and 4 option years) Analytical services for the chemical and/or biological analysis of soils, sediments, sludges, ground waters, surface waters and other materials required for identification, classification, qualification, and other environmental compliance purposes at Red River Army Depot (RRAD). | 57% | Combined Synopsis | 07/01/2026 |
Request for Information (RFI) only. This RFI is amended to extend the response date to 11/30/2026 at 3:00PM EST. Purpose This RFI seeks information regarding Laboratory Capabilities to perform pool and torch fire tests of Thermal Protection Systems (TPS) to the U.S. DOT Volpe Center. A qualified vendor must be capable of performing pool and torch fire tests as described in 49 CFR 179 Appendix B. The vendor should also be capable of performing light fabrication and/or assembly of test specimens for the aforementioned tests. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to perform a minimum of two (2) pool fire tests and two (2) torch fire tests for each TPS. The total number of TPS to be tested has not yet been determined. Although the tests will be similar to those defined in 49 CFR 179 Appendix B, this research may require some modifications to the test protocol including but not limited to additional instrumentation, data collection or varying of test parameters such as duration of the fire exposure. The Volpe Center is also looking for the capability to perform light fabrication of test specimens as detailed above. For examples of possible fabrication requirements, see https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Scope of Information Requested The U.S. DOT Volpe Center is seeking information from commercial testing laboratories, university laboratories, and other interested parties on their willingness, ability, and experience in conducting the simulated pool and torch fire testing planned for various tank car TPS. Descriptions of your facility’s pool and torch fire testing capabilities, including equipment, experience, capacity, resources and staff preparedness for testing tank car TPS. You are encouraged to submit publications of relevant past work. Descriptions of any laboratory accreditation or certification related to pool fire testing. Laboratory hourly rates, technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. Descriptions of staff/facility/equipment availability, including any limitations on when fire testing may be conducted (e.g., blackout dates due to seasonal weather conditions) Information on any pre-test data or preliminary sample testing that may be required prior to a full-scale test. Information on your typical post-test laboratory analyses and report formats, and your ability to tailor report/data formats to customer requirements. Description of your facility’s fabrication and assembly capabilities, including: Cutting of 11 gauge steel sheet (0.1196 inches) Cutting of 0.625 inch steel plate Cutting of insulating materials that may generate hazardous airborne particulates such as fiberglass. Mixing and application of coatings to required specifications similar to examples on the PHMSA TPS list. What is the required lead time for fabrication of test specimens? Technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. for fabrication of test specimens. Estimated time to conduct one simulated pool fire and one simulated torch fire test including setup, conduct of the test, cooldown, and teardown of test setup. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | 57% | Market Research | 11/30/2026 |
Additional Details
Solicitation Number
W912ES23Q0052
Archive Date
Jun 7, 2023
Office Address
SAINT PAUL, MN, 55101-1323