Notice ID: b94b12bf4897411199ad6dbde025e075Combined Synopsis/Solicitation
Remanufacture of Kato Engineering Generator
Archived on September 14, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM UTC−05:00
- Posted
- August 17, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 335312: Motor and Generator Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W07V ENDIST ST PAUL
- Place of performance
- Fountain City, 54629
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W912ES23Q0079
- Notice ID
- b94b12bf4897411199ad6dbde025e075
Description
The U.S. Army Corps of Engineers - St. Paul District requires a Contractor to perform a complete, zero hour refurbishment of a generator used to power the USAC Dredge Goetz. Manufacturer: Kato Engineering Model #: AA27336001 Serial # 16881-01 The generator shall be disassembled, and all the electrical components shall be resistance tested and Meg tested. All parts shall be steam cleaned, all winding parts will be dried in at a minimum of 300 degrees, in an oven, then secondary resistance and Meg testing shall be conducted. A report will be provided to the Government with all readings measured. All machined parts shall be checked to confirm they are within factory specifications. The unit will receive a reworked rotating assembly complete with new core built to current design standards. The unit shall also receive new bearings, diodes, capacitor, insulators, RTD’s a surge protector. The unit shall be built to an as new condition with all safety upgrades installed. The windings shall be over sprayed with a red glyptol epoxy. Unit will be re-assembled and tested against the original test data to insure credibility of the insulation system and operability. A copy of the test data will be provided to the Government. A finish coat of paint on all surfaces shall be applied to the unit before shipment. Vendor is responsible for the shipment of the Generator unit to their facility and the return to the Government facility in Fountain City. All work shall be completed and the generator returned to the Fountain City, WI Service Base no later than May 1, 2024. This solicitation is 100% set-aside for Small Business. OFFEROR SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections with the NAICS code applicable to the solicitation.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
W912ES23Q0079- Combined Synopsis
- Combined SynopsisCurrentAug 17, 2023
Remanufacture of Kato Engineering Generator
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
GENERATORS - Stationary and Mobile; 1. Stationary - Mounted on less than 190 gal (plus or minus 5 gal) #2 Diesel fuel tank. (Must have hole for conduit access); Runs on #2 Diesel Fuel; 60kVA (plus or minus 10kVA); 120/208 3-phase, 60Hz; Controls compatible with Generac GTS Series Transfer Switch; Equipped with Main Breaker, Batteries, Block Heater, Battery charger 2. Mobile - 60kVA (plus or minus 10kVA); 120/208, 3-phase, 60Hz; Mounted on 150gal (plus or minus10gal) #2 Diesel Fuel Tank; Runs on #2 Diesel Fuel; Prepared for mobile use with temporary connection ports; 100 feet (plus or minus 10 feet) of cables for each phase, neutral, and ground; Cables must come equipped with all coupling/connector ends installed; Integrally secured to a Heavy Duty Steel Trailer with 2 inch Ball hitch; DOT Towing package with Electric Breaks | 55% | Combined Synopsis | 09/04/2026 |
Generators | 55% | Combined Synopsis | 04/16/2026 |
Reason for amendment 0002 is to update the not to exceed dimensions, part number, as well as slight update to the salient characteristics. Generators. | 55% | Combined Synopsis | 03/28/2026 |
150 kW Generator Dual FuelStandby Generator120/2083 Phase Type of Enclosure is NEMA 3R Rated; No tank required, natural gas is available at the site; Receiving facility and forklift available, so no offloading required. Battery and Battery Charger required. Amendment 0001 - Due date change. Amendment 0002 - EPA requirement correction. | 53% | Combined Synopsis | 09/18/2026 |
350 kW Generator Dual Fuel Standby Generator 120/208 3 Phase. Type of Enclosure is NEMA 3R Rated; No tank required, natural gas is available at the site; Receiving facility and forklift available, so no offloading required. Battery and Battery Charger required. Amendment 0001- Due Date Modification. Amendment 0002- Corrected inaccurate EPA requirements. | 53% | Combined Synopsis | 09/18/2026 |
Additional Details
Solicitation Number
W912ES23Q0079
Archive Date
Sep 14, 2023
Office Address
SAINT PAUL, MN, 55101-1323