GovChime
Notice ID: 7f52f4f0cb3d484da786956dfa5b079fCombined Synopsis/SolicitationArchived

Steel Material for Fabrication of Miter Gate Anchorages

Archived on August 12, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM CDT
Posted
July 25, 2025
Notice type
Combined Synopsis/Solicitation
Set-aside
No Set aside used
NAICS
331110: Iron and Steel Mills and Ferroalloy Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W07V ENDIST ST PAUL
Place of performance
Pleasant Valley, 52767
Last updated
Nov 11, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W912ES25QA039
Notice ID
7f52f4f0cb3d484da786956dfa5b079f

Description

SCOPE OF WORK Steel Material for Fabrication of Miter Gate Anchorages U.S. Army Corps of Engineers, St. Paul District 1. General Description. The Contractor shall provide three (3) ASTM A709 HPS 70WF 4" thick x 8' x 20' steel plates cut into three (3) equal pieces (80" x 96") and include delivery to US Army Corps of Engineers Service Base in Pleasant Valley, IA. The intended use is for the fabrication of miter gate anchorage components for Locks 5, 6 and 9 along the upper Mississippi River. Delivery MUST be no later than October 20, 2025. 2. ASTM A 709 HPS 70WF Plate Specifications. (See ASTM Attachment A 709-24) A. Steel must be compliant with DF ARS 252.225-7030, Restriction on Acquisition of Carbon, Alloy, and Armor Steel Plate. B. Dimensions of master plate is 4" thick x 8' x20' and then cut into three equal sections of 4" x 6' 8" x 8' (plus/minus 1/2"). See attached drawing. C. A 4" x 4" sample of steel to be cut from each piece (see attached pdf for acceptable coupon locations) is acceptable to conduct testing. D. Tensile and hardness testing must meet minimums described in ASTM A 709 Table 1 for HPS70W E. The plate is a tension component of a member that requires fracture control practice. Impact test the plate in accordance with A673/A673M. Results must meet the requirements of ASTM A709 Table 12 for Zone 3 for HPS 70WF. F. Chemical Requirements must conform to ASTM A709 Table 7 for HPS 70W. G. Must conform to Buy American Act. H. Final product shall be clean and free of any oil or grease, dross, slag or burrs. All cut edges (regardless of method) shall have a surface roughness acceptable for welding. I. Final product shall be legibly marked with the applicable designation, grade, heat number, size and thickness, name brand, or trademark of the manufacturer for identification and shipment. J. Bundle and band the steel material as required for shipping, with cribbing at minimum six inches above the base of the shipping platform to allow offloading with a forklift and/or crane. Covering of the material during shipment is not required. K. Mill Certificates shall be submitted after the Contractor verifies the material meets all the aforementioned test requirements. 3. Submittals The Contractor shall submit a verifiable mill certification electronically in pdf format via email to both the Government Contracting Officer's representative and the Government technical point of contact prior to shipment of the material. The mill certificate must match the tag on the material. The Government technical point of contact is: Available at award. 4. Delivery Schedule Delivery of the ASTM A709 HPS 70WF shall be no later than October 20th, 2025. Soonest possible delivery is requested if possible. All material shall be delivered to the following address during business hours of07:00am to 03:00pm, Monday through Thursday, excluding federal holidays. Please give the POC listed below 24 hours advance notice and request ESCORTED entry to the facility. US Army Corps of Engineers MRPO-Service Base 25549, 182nd St. Pleasant Valley, IA, 52767 POC: Available at award.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (7)

  • Solicitation Amendment 2- W912ES25QA039 SF30.pdf

    732 KBAdded in Combined Synopsis/Solicitation version 6Posted
    Download
  • A709 HPS 70WF3 Sample Layout.pdf

    16 KBAdded in Combined Synopsis/Solicitation version 6Posted
    Download
  • Solicitation Amendment W912ES25QA039 SF30.pdf

    1.3 MBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • Lollipop Yield Model (1).pdf

    14 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • Solicitation W912ES25QA039.pdf

    5.3 MBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • SOW Attachment.pdf

    232 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • ASTM Attachment A709-24.pdf

    275 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationArchived

    Steel Material for Fabrication of Miter Gate Achorages

    Notice 14e54a0fd5ea4fac8ca1eda822f7bc39 on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationArchived

    Steel Material for Fabrication of Miter Gate Anchorages

    Notice 59fe98b379a34963b620c21409fefbed on SAM.gov

  3. 3
    Version 3Combined Synopsis/SolicitationArchived

    Steel Material for Fabrication of Miter Gate Anchorages

    Notice 515a760f78824f73a32899dafd00c7d5 on SAM.gov

  4. 6
    Version 6Combined Synopsis/SolicitationArchivedCurrent

    Steel Material for Fabrication of Miter Gate Anchorages

    Notice 7f52f4f0cb3d484da786956dfa5b079f on SAM.gov

  5. 7
    Version 7Award NoticeArchived

    Type changed from Combined Synopsis/Solicitation to Award Notice

    Steel Material for Fabrication of Miter Gate Anchorages

    Notice 6cd6564b56ee4397a4356913767bab24 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

W912ES25QA039

Archive Date

Aug 12, 2025