Notice ID: de05d88e3f65aac96df07705265c3ea1Presolicitation
56--USACE Europe District FY15 Poland Multiple Award Task Order Contract. Clarification of firms able to participate in the contract.
Archived on July 24, 2015. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 6:00 AM UTC+01:00
- Posted
- March 3, 2015
- Notice type
- Presolicitation
- NAICS
- 236220: Commercial and Institutional Building Construction
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W2SD FEST NAU1 EUROPE
- Place of performance
- USACE District, Europe CMR 410 BOX 7, APO AE 09096 DE
- PSC
- 56: CONSTRUCTION AND BUILDING MATERIAL
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- W912GB15R0020
- Notice ID
- de05d88e3f65aac96df07705265c3ea1
Description
Classification Code: Y -- Construction of structures and facilities NAICS Code: 236 -- Construction of Buildings/236220 -- Commercial and Institutional Building Construction AMENDMENT 0001 SUMMARY OF CHANGES****** 1. All briefings will be presented in English with simultaneous Polish Translation. 2. Please note that there will be a separate proposal conference event related to the Industry Day for European Phased Adaptive Approach Phase III - Poland on 11 February being held at the same location. Please reference solicitation W912GB-15-R-0022 announcement on the FedBizOpps webpage for further details. The link is also here: https://www.fbo.gov/index?s=opportunity&mode=form&tab=core&id=210316f615bfd3bb9a2131e5bb31e8b7&_cview=0 Change to Pre Solicitation Notice: W912GB-15-R-0020. THE FOLLOWING PARAGRAPH IS REMOVED FROM THE PRE-SOLICITATION NOTICE: Contractors participating in this solicitation must be licensed and approved firms or joint ventures with licensed and approved firms legally permitted to work in Poland. The desired pool of contracts for the solicitation will be companies proving previous successful experience in Poland. PARAGRAPH IS CHANGED TO: This project falls under the US-Poland SOFA Agreement. Previous experience in Poland will not be limited solely to firms who have only done work in Poland. NOTICE TO OFFERORS: THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION, EITHER BEFORE OR AFTER PROPOSAL OPENING, WITH NO OBLIGATION TO THE OFFEROR BY THE GOVERNMENT. The USACE, Europe District, Contracting Office will be the sole point of contact (POC) for this solicitation. The primary point of contact is: Preston Hayward, Contract Specialist, e-mail: preston.j.hayward@usace.army.mil, facsimile number: +49-611-9744-2834. Contracting Office Address: USACE District, Europe, CMR 410 BOX 7, APO, AE 09096 Point of Contact(s): Preston Hayward , 49 061197442834 The U.S Army Corps of Engineers, Europe District, Pre-Solicitation Notice W912GB-15-R-0020 FY15 Poland MATOC .
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Preston Hayward, 651-290-5709 USACE District, Europe
Documents
No documents available.
Lifecycle
Solicitation:
W912GB15R0020- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- 4×Pre-SolicitationCurrentJan 29, 2015
56--USACE Europe District FY15 Poland Multiple Award Task Order Contract. Clarification of firms able to participate in the contract.
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
PRE-SOLICITATION NOTICE UPDATED 29 OCTOBER 2026 notice modifies the Pre-Solicitation Notice originally posted on 09 September 2026 for the Long Term Equipment Storage and Maintenance-Complex LTESM-C at Powidz Air Base, Poland. This notice is an administrative summary only; it does not constitute a Request for Proposals (RFP), and proposals are not requested at this time. INDUSTRY DAY STATUS: The Industry Day was successfully conducted on 21 October 2026 and is now complete. The following documents from the event are now attached for reference: B.07 LTESM-C Expansion Industry Day Project Scope (Presentation Slides) B.07 LTESM C Expansion_ Industry Day Attendee Roster (Sign-in Sheet/Roster) SOLICITATION TIMELINE: USACE-NAU appreciates your interest in this procurement. The Government anticipates the Phase 1 solicitation to be posted on or around 08 December 2026 under solicitation number W912GB27RA005. All subsequent procurement information will be posted via sam.gov. | 60% | Pre-Solicitation | 10/07/2026 |
W912GB25R0011Munitions Storage Area (MSA) at Powidz Air Base, Poland (Recompete of W912GB21R0008; Original Solicitation W912GB24R0050)The plans and specifications will be posted no later than 11 January 2025. While there should not be any changes from the draft plans and specifications previously provided, offerors are cautioned to ensure they thoroughly review ALL solicitation documents prior to proposal submittal.PLACE OF PERFORMANCE: Powidz Air Base, PolandPROJECT TITLE: Munitions Storage Area (MSA), PowidzACQUISITION INFORMATION: USACE NAU is soliciting a stand-alone construction Design-Bid-Build (DBB) Firm-Fixed Price (FFP) contract for the construction of the Munitions Storage Area (MSA) at Powidz Air Base, Poland. The construction completion period is anticipated to be 1020 calendar days after the Contractor receives the Notice to Proceed for the basic work. The project includes the construction of 56 earth covered magazines (ECMs) with supporting maintenance buildings and operational pads, rail, paving, fencing, utilities and appurtenances. All ECMs under this project will be identical in both design and construction. The anticipated magnitude of construction for this project is between $100,000,000 and $250,000,000.This acquisition will be an unrestricted action under full and open competitive conditions, subject to certain restrictions under the National Competitive Bidding Plus (NCB+) procedures: namely, this acquisition is open to all eligible firms registered and incorporated in a North Atlantic Treaty Organization (NATO) member nations. Only firms from the 32 NATO countries will be permitted to participate as part of this project to include the prime contractor, sub-contractor(s), and manufacturers. None of the work, including labor and services, shall be performed by other than firms from within the 32 NATO member nations. Additionally, no materials or items of equipment to include identifiable sub-assemblies shall be manufactured or assembled by a firm other than from within the 32 NATO member nations. Small and Small Disadvantaged Business requirements are waived for this project due to its location Outside of the Contiguous United States (OCONUS).Technical inquiries and any other questions shall be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. The bidder inquiry key is: MZ69H3-4SQI9I. A VIRTUAL industry day will be held on 12 March 2025 at 1300 Central European Time (CET). It will be held via Microsoft Teams. The information is below and the slide deck presented will be provided via a future amendment.https://dod.teams.microsoft.us/l/meetup-join/19%3adod%3ameeting_2fa3f6e2546e4dd99b07add146f71c01%40thread.v2/0?context=%7b%22Tid%22%3a%22fc4d76ba-f17c-4c50-b9a7-8f3163d27582%22%2c%22Oid%22%3a%22da94ae66-c297-4da2-8835-018e2bd298f0%22%7dMeeting ID: 993 636 156 834 Passcode: hn6TC9EA ________________________________________Dial in by phone +1 503-207-9433,,239487119# United States, Beaverton Find a local number Phone conference ID: 239 487 119# The hyperlink is also included as an amendment attachment below. | 60% | Awarded | Open |
Amendment to the Sources Sought - November 10, 2026 The following questions have been added: How do our shipping restrictions affect your pricing, schedule, and risk? How does the Jones Act impact your logistics process, if at all? If regulations did not matter, what do you recommend to make the logistics and transportation process easier for US Government requirements? How does the Balance of Payments Program impact your list of suppliers? How frequent does the logistics process directly contribute to delays or cost increases? Have you lost revenue due to logistics delays/issues that could have been addressed earlier in the procurement process? ****SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY**** This announcement seeks information from industry which will be used for preliminary planning purposes. No proposals are being requested or accepted with this announcement. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. NO SOLICITATION, SPECIFICATIONS OR DRAWINGS ARE AVAILABLE AT THIS TIME. 1. AGENCY: United States Army Corps of Engineers (USACE) Latin America and Caribbean District (SAA) 2. NAICS: 236220 - Commercial and Institutional Building Construction 3. PLACE OF PERFORMANCE: Peru 4. ACQUISITION INFORMATION: The U.S. Army Corps of Engineers (USACE), Latin America and Caribbean District (SAA), is issuing this Sources Sought announcement as a means of conducting market research to identify parties having an interest in and the resources to support a potential future design-build construction project at the Callao Naval Base, Lima, Peru. The result of this market research will contribute to determining the method of procurement. Estimated Magnitude of Construction: Between $25,000,000 and $50,000,000. Performance Period: 540 days after Notice to Proceed. Anticipated Award Date: Fiscal Year 2027 Quarter 3 Small Business Programs: In accordance with FAR 19.000(b)(1)(ii), the Procuring Contracting Officer (PCO) has elected not to apply FAR Part 19 (Small Business Programs) to this overseas procurement. Consequently, small business set-asides will not be utilized for this project in Peru. However, all responsible sources—including both U.S. concerns (large and small) and foreign entities—are encouraged to submit responses to this Sources Sought notice. 5. ANTICIPATED ACQUISITION STRATEGY: The acquisition strategy for this requirement will be determined based on the responses to this Sources Sought notice and other market research. The Government is considering several compliant acquisition pathways to ensure the successful delivery of this complex Design-Build project in Peru. All interested firms are strongly encouraged to submit a comprehensive capabilities statement, as the information received will be critical in determining the final method of procurement. The primary anticipated strategy is a Two-Phase Design-Build procurement under the authority of FAR Part 36.3. In this scenario, the Government would issue a public Phase 1 solicitation requesting offeror qualifications. Based on these qualifications, the Government would down-select the most highly qualified firms (typically no more than five) who would then be eligible to compete in Phase 2 and submit detailed technical and price proposals. However, based on the unique challenges of performing complex construction in Peru, the Government is also considering the following alternative strategies: Option 1: Limited Competition under FAR Part 6, Other Than Full and Open Competition. If market research reveals that only a very limited number of sources possess the unique combination of Design-Build expertise, mandatory Peruvian licensing (Registro Nacional de Proveedores - RNP), and demonstrated experience with specialized facilities (e.g., POL, medical, secure warehouses) in the local market, the Government may justify limiting competition. Option 2: Establishment of a Qualified Bidders List (QBL) under FAR Part 9.2. If the operational environment in Peru and the specialized nature of the requirement warrant it, the Government may decide to establish a formal Qualification Requirement. Under this authority, the Government would create a list of pre-qualified firms that demonstrate the essential standards for technical capability, financial stability, and in-country operational capacity. Future solicitations for this requirement would then be limited to firms on this established QBL. The Government’s final decision will be based on which strategy provides the best value and ensures a competitive environment among responsible and qualified contractors capable of meeting the demanding technical and logistical requirements of this project. 6. PROJECT DESCRIPTION: The contemplated scope consists of complete Design-Build services—including geotechnical verification, site preparation, civil works, architectural and engineering design after award, structural construction, mechanical/electrical/plumbing (MEP), specialized HVAC/fire suppression, Defense Base Act (DBA) insurance coverage, and Furniture, Fixtures, & Equipment (FF&E). Facility / Scope Package Primary Function Key Technical Considerations Building 110 Spare Parts Warehouse Heavy-duty slab design, industrial racking integration, material handling flow, automated logistics staging. Building 115 Clothing & Gear Warehouse High-density pallet storage, humidity and climate control, inventory distribution bays. Building 112 Material Warehouse Bulk staging, overhead crane/hoist accommodations, heavy equipment ingress/egress ramps. Building 113 Customs Warehouse Secure bonded holding areas, host-nation customs inspection layout, physical security infrastructure. Building 114 Petroleum, Oil, and Lubricants (POL) Warehouse Secondary containment, explosion-proof electrical systems, specialized foam/water fire suppression, environmental drainage controls. Building 111 Medicine & Medical Supplies Warehouse Temperature/humidity-controlled storage (cold chain capability), pharmaceutical-grade clean finishings, backup power integration. Building 120 DIRNOTEMAT & Quality Control Building Administrative offices, testing and quality inspection laboratories, specialized testing benches, IT/telecom infrastructure. Site & Ancillary Works Infrastructure & Integration Site grading, structural fill, perimeter security, access roads, utility connections, complete FF&E packages, and host-nation compliant permitting. 7. SOURCES SOUGHT: The purpose of this source sought is to gain knowledge of interest, capabilities and qualifications of contractors who have the capabilities to complete and perform contracts of this magnitude, and to address any questions, recommendations or concerns from Industry. The Government must ensure there is adequate competition among potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this Sources Sought announcement. The result of this market research will contribute to determining the method of procurement. 8. RESPONSES: The Capabilities Statement for this Sources Sought is not intended to be a Request for Proposal nor Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach. It is to request statements regarding the company's ability to demonstrate existing-or-developed expertise and experience in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may also be submitted. This synopsis is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Interested parties are requested to provide a capabilities statement addressing the following areas. Section 1: Company Information Company Name, Address, and Website Point of Contact (Name, Title, Phone, Email) CAGE Code and SAM UEI Number Business Size and Status (e.g., Small Business, Large Business) Bonding: What bonding or guarantee methods are available to your company to secure contract performance and protect downstream subcontractor/labor payments for a project located in Peru? Please specify if your company utilizes US Treasury-listed Surety Bonds, Peruvian Bank Letters of Guarantee (Carta Fianza), or Insurance-backed Guarantees (Póliza de Caución). Relevant NAICS Codes Section 2: Interest and Experience in Peru Please confirm your company's interest in performing a design-build construction project of this magnitude and complexity in Lima, Peru. Summary of prior construction experience in Peru or South America. Address our minimum operational needs of experience with: Peruvian construction standards (Reglamento Nacional de Edificaciones), professional licensing requirements (Colegio de Ingenieros del Perú / Colegio de Arquitectos del Perú); Local labor laws, and tax/customs processes (SUNAT). Describe your firm's capability to obtain the necessary permits and licenses required for construction work in Peru and to comply with all applicable host nation laws and regulations. Discuss your firm's experience with international logistics, including the transportation of materials and equipment to project sites in South America. Discuss your firm’s familiarity with base security clearance procedures, host-nation military vetting, and port access protocols. Section 3: Design-Build and Technical Capabilities Provide a brief overview of your firm’s design-build experience as a prime contractor. Short Description of your firm's D-B delivery model (in-house engineering vs. joint-venture/partnership with qualified Peruvian or international A-E design firms). Provide examples of similar to the Project Description (warehouse, logistics, or similar industrial facilities your firm has designed and constructed). Overview of your logistical strategy for material staging, port-of-entry handling at Callao, procurement of heavy construction materials in Lima, and securing qualified local subcontractors and skilled labor. Section 4: Market Factors Please identify any significant market factors (e.g., availability of qualified local labor, supply chain issues, subcontractor market in Peru) that could impact the successful execution of a project of this nature. What significant concerns or risks do you foresee with designing and constructing a facility in Lima, Peru? 9. SUBMISSION INSTRUCTIONS: Format: Responses may be submitted in PDF or Microsoft Word format (suggested length: 3–6 pages). Brochures do not count towards this page count. Submission Deadline: Please submit your responses by 4:00 PM Atlantic Standard Time (AST) on 10 December 2026. No hard copies will be accepted. Submission Point of Contact: Please email responses directly to: Renee Booth, Contracting Officer: Meranda.R.Booth@usace.army.mil Jaclyn Yocum, Contract Specialist: Jaclyn.C.Yocum@usace.army.mil Subject Line for Replies: Market Research Response: Callao, Peru Infrastructure Modernization Project - [Insert Company Name] 10. QUESTIONS: Questions regarding this Sources Sought Announcement may be directed to Contract Specialist, Jaclyn Yocum, at Jaclyn.C.Yocum@usace.army.mil AND Contracting Officer, Renee Booth, at Meranda.R.Booth@usace.army.mil. Enmienda a la Búsqueda de Fuentes - 10 de noviembre de 2026 Se han añadido las siguientes preguntas: ¿Cómo afectan nuestras restricciones de envío a su precio, cronograma y nivel de riesgo? ¿De qué manera impacta el Jones Act en su proceso logístico, si es que lo hace? Si las regulaciones no importaran, ¿qué nos recomendaría para hacer más fácil el proceso de logística y transporte para los requisitos del Gobierno de los Estados Unidos? ¿Cómo impacta el Programa de Balanza de Pagos (Balance of Payments Program) en su lista de proveedores? ¿Con qué frecuencia el proceso logístico contribuye directamente a retrasos o incrementos de costo? ¿Han perdido ingresos debido a retrasos o problemas logísticos que podrían haberse abordado con mayor anticipación en el proceso de contratación? ****SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY**** ****BÚSQUEDA DE FUENTES ÚNICAMENTE PARA FINES DE INVESTIGACIÓN DE MERCADO**** Este anuncio solicita información de la industria que se utilizará para fines de planificación preliminar. No se solicitan ni aceptan propuestas mediante este anuncio. ESTA NO ES UNA SOLICITUD DE PROPUESTAS Y NO SE ADJUDICARÁ NINGÚN CONTRATO COMO RESULTADO DE ESTA SINOPSIS. EN ESTE MOMENTO NO HAY DISPONIBLES SOLICITUD, ESPECIFICACIONES NI PLANOS. 1. AGENCIA: Cuerpo de Ingenieros del Ejército de los Estados Unidos (USACE), Distrito de Latino América y el Caribe (SAA). 2. NAICS: 236220 — Construcción de Edificios Comerciales e Institucionales** 3. LUGAR DE EJECUCIÓN: Perú. 4. INFORMACIÓN DE ADQUISICIÓN: El Cuerpo de Ingenieros del Ejército de los Estados Unidos (USACE), Distrito de Latino América y el Caribe (SAA), emite este anuncio de Búsqueda de Fuentes como medio para realizar una investigación de mercado destinada a identificar entidades que tengan interés y recursos para apoyar un posible proyecto futuro de construcción bajo la modalidad de diseño y construcción en la Base Naval del Callao, Lima, Perú. Los resultados de esta investigación de mercado contribuirán a determinar el método de adquisición. Magnitud estimada de la construcción: Entre USD 25,000,000 y USD 50,000,000. Período de ejecución: 540 días después de la Notificación para Proceder. Fecha prevista de adjudicación: tercer trimestre del año fiscal 2027. Programas para pequeñas empresas: De conformidad con FAR 19.000(b)(1)(ii), el Oficial de Contrataciones Adquirente (PCO) ha decidido no aplicar la Parte 19 del FAR (Programas para Pequeñas Empresas) a esta adquisición en el extranjero. Por consiguiente, no se utilizarán reservas para pequeñas empresas en este proyecto en Perú. Sin embargo, se alienta a todas las fuentes responsables —incluidas tanto las empresas estadounidenses, grandes y pequeñas, como las entidades extranjeras— a presentar respuestas a este aviso de Búsqueda de Fuentes. 5. ESTRATEGIA DE ADQUISICIÓN PREVISTA: La estrategia de adquisición para este requisito se determinará con base en las respuestas a este aviso de Búsqueda de Fuentes y en otras investigaciones de mercado. El Gobierno está considerando varias vías de adquisición que cumplan con los requisitos aplicables para asegurar la ejecución exitosa de este complejo proyecto de diseño y construcción en Perú. Se recomienda a todas las empresas interesadas que presenten una declaración integral de capacidades, ya que la información recibida será fundamental para determinar el método final de adquisición. La estrategia principal prevista es una adquisición de diseño y construcción en dos fases, conforme a la autoridad de la Parte 36.3 del FAR. En este escenario, el Gobierno emitiría una solicitud pública de la Fase 1 para requerir las calificaciones de los oferentes. Con base en dichas calificaciones, el Gobierno preseleccionaría a las empresas mejor calificadas —por lo general, no más de cinco— que posteriormente serían elegibles para competir en la Fase 2 y presentar propuestas técnicas detalladas y propuestas de precio. Sin embargo, debido a los desafíos particulares asociados con la ejecución de construcción compleja en Perú, el Gobierno también está considerando las siguientes estrategias alternativas: Opción 1: Competencia limitada conforme a la Parte 6 del FAR, distinta de la competencia plena y abierta. Si la investigación de mercado revela que solo un número muy limitado de fuentes posee la combinación única de experiencia en diseño y construcción, licenciamiento peruano obligatorio (Registro Nacional de Proveedores, RNP) y experiencia demostrada con instalaciones especializadas —por ejemplo, almacenes de petróleo, aceites y lubricantes (POL), suministros médicos o almacenamiento seguro— en el mercado local, el Gobierno podría justificar la limitación de la competencia. Opción 2: Establecimiento de una Lista de Licitantes Calificados (QBL) conforme a la Parte 9.2 del FAR. Si el entorno operacional en Perú y la naturaleza especializada del requisito lo justifican, el Gobierno podría decidir establecer un Requisito Formal de Calificación. Conforme a esta autoridad, el Gobierno crearía una lista de empresas precalificadas que demuestren los estándares esenciales de capacidad técnica, estabilidad financiera y capacidad operativa dentro del país. Las futuras solicitudes para este requisito se limitarían entonces a las empresas incluidas en esta QBL establecida. La decisión final del Gobierno se basará en la estrategia que ofrezca el mejor valor y garantice un entorno competitivo entre contratistas responsables y calificados, capaces de cumplir los exigentes requisitos técnicos y logísticos de este proyecto. 6. DESCRIPCIÓN DEL PROYECTO: El alcance previsto comprende servicios completos de diseño y construcción, incluidos: verificación geotécnica; preparación del sitio; - obras civiles; diseño arquitectónico y de ingeniería posterior a la adjudicación; construcción estructural; sistemas mecánicos, eléctricos y de plomería (MEP); sistemas especializados de calefacción, ventilación y aire acondicionado (HVAC) y de supresión de incendios; cobertura de seguro conforme a la Defense Base Act (DBA); y mobiliario, accesorios y equipo (FF&E). Instalación / Alcance del Proyecto Función principal Consideraciones técnicas clave Edificio 110 Almacén de repuestos Diseño de losa para cargas pesadas, integración de estanterías industriales, flujo de manejo de materiales y áreas de preparación logística automatizada. Edificio 115 Almacén de vestimenta y equipo Almacenamiento de pallets de alta densidad, control de humedad y clima, y áreas de distribución de inventario. Edificio 112 Almacén de materiales Áreas de acopio a granel, instalaciones para puente grúa/polipasto y rampas para el ingreso y salida de equipo pesado. Edificio 113 Almacén de aduanas Áreas seguras de almacenamiento bajo control aduanero, distribución para inspecciones aduaneras del país anfitrión e infraestructura de seguridad física. Edificio 114 Almacén de petróleo, aceites y lubricantes (POL) Contención secundaria, sistemas eléctricos a prueba de explosiones, supresión especializada de incendios con espuma/agua y controles de drenaje ambiental. Edificio 111 Almacén de medicamentos y suministros médicos Almacenamiento con control de temperatura y humedad —incluida la capacidad de cadena de frío—, acabados sanitarios de grado farmacéutico e integración de energía de respaldo. Edificio 120 Edificio de DIRNOTEMAT y Control de Calidad Oficinas administrativas, laboratorios de pruebas e inspección de calidad, bancos especializados de prueba e infraestructura de tecnologías de la información y telecomunicaciones. Obras del sitio y obras complementarias Infraestructura e integración Nivelación del sitio, relleno estructural, seguridad perimetral, vías de acceso, conexiones de servicios públicos, paquetes completos de mobiliario, accesorios y equipo (FF&E), y permisos que cumplan con los requisitos del país anfitrión. 7. BÚSQUEDA DE FUENTES: El propósito de esta búsqueda de fuentes es obtener información sobre el interés, las capacidades y las calificaciones de contratistas con capacidad para completar y ejecutar contratos de esta magnitud, así como atender preguntas, recomendaciones o inquietudes de la industria. El Gobierno debe asegurar que exista competencia adecuada entre el posible grupo de contratistas responsables. No se requiere experiencia previa en contratos gubernamentales para presentar una respuesta a este anuncio de Búsqueda de Fuentes. Los resultados de esta investigación de mercado contribuirán a determinar el método de adquisición. 8. RESPUESTAS: La Declaración de Capacidades para esta Búsqueda de Fuentes no constituye una Solicitud de Propuestas ni una Invitación a Licitar, ni restringe al Gobierno respecto a un enfoque final de adquisición. Su finalidad es solicitar declaraciones sobre la capacidad de la empresa para demostrar conocimientos especializados y experiencia existentes o desarrollados en relación con las áreas aquí especificadas. También pueden presentarse folletos comerciales o materiales de mercadeo existentes. Esta sinopsis tiene únicamente fines de información y planificación; no debe interpretarse como un compromiso del Gobierno, ni el Gobierno pagará por la información solicitada. No se notificará a los participantes sobre los resultados de la evaluación. Se solicita a las partes interesadas que proporcionen una declaración de capacidades que aborde las siguientes áreas: Sección 1: Información de la empresa Nombre de la empresa, dirección y sitio web. Punto de contacto (nombre, cargo, teléfono y correo electrónico). Código CAGE y número UEI de SAM. Tamaño y condición de la empresa (por ejemplo, pequeña empresa o gran empresa). Garantías: ¿Qué métodos de fianza o garantía tiene disponibles su empresa para asegurar el cumplimiento contractual y proteger los pagos a subcontratistas y trabajadores de niveles inferiores en un proyecto ubicado en Perú? Especifique si su empresa utiliza fianzas de garantía respaldadas por compañías incluidas en la lista del Tesoro de los Estados Unidos, cartas fianza bancarias peruanas o pólizas de caución. Códigos NAICS pertinentes. Sección 2: Interés y experiencia en Perú Confirme el interés de su empresa en ejecutar un proyecto de construcción bajo la modalidad de diseño y construcción de esta magnitud y complejidad en Lima, Perú. Resumen de experiencia previa en construcción en Perú o América del Sur. Aborde los siguientes requisitos operacionales mínimos de experiencia: Normas de construcción peruanas (Reglamento Nacional de Edificaciones) y requisitos de licenciamiento profesional (Colegio de Ingenieros del Perú / Colegio de Arquitectos del Perú). Leyes laborales locales y procesos tributarios y aduaneros (SUNAT). Describa la capacidad de su empresa para obtener los permisos y licencias necesarios para realizar trabajos de construcción en Perú y para cumplir todas las leyes y reglamentos aplicables del país anfitrión. Describa la experiencia de su empresa en logística internacional, incluido el transporte de materiales y equipos a sitios de proyecto en América del Sur. Describa la familiaridad de su empresa con los procedimientos de autorizaciones de seguridad para acceso a bases, los procesos de evaluación militar del país anfitrión y los protocolos de acceso portuario. Sección 3: Capacidades técnicas y de diseño y construcción Proporcione una breve descripción general de la experiencia de su empresa en diseño y construcción como contratista principal. Breve descripción del modelo de ejecución de diseño y construcción de su empresa, por ejemplo, ingeniería interna frente a una empresa conjunta o asociación con firmas peruanas o internacionales calificadas de arquitectura e ingeniería (A-E). Proporcione ejemplos similares a la Descripción del Proyecto, tales como almacenes, instalaciones logísticas u otras instalaciones industriales similares que su empresa haya diseñado y construido. Proporcione una descripción general de su estrategia logística para el acopio de materiales, la gestión en el puerto de entrada del Callao, la adquisición de materiales pesados de construcción en Lima y la contratación de subcontratistas locales y mano de obra calificada. Sección 4: Factores de mercado Identifique los factores de mercado significativos —por ejemplo, disponibilidad de mano de obra local calificada, problemas en la cadena de suministro o el mercado de subcontratistas en Perú— que podrían afectar la ejecución exitosa de un proyecto de esta naturaleza. ¿Qué preocupaciones o riesgos significativos prevé respecto al diseño y la construcción de una instalación en Lima, Perú? 9. INSTRUCCIONES DE PRESENTACIÓN Formato: Las respuestas podrán presentarse en formato PDF o Microsoft Word (extensión sugerida: de 3 a 6 páginas). Los folletos no cuentan para este límite de páginas. Fecha límite de presentación: Presente sus respuestas a más tardar a las 4:00 p. m., hora estándar del Atlántico (AST), el 10 de diciembre de 2026. No se aceptarán copias impresas. Puntos de contacto para la presentación: Envíe las respuestas directamente por correo electrónico a: Renee Booth, Oficial de Contrataciones: Meranda.R.Booth@usace.army.mil Jaclyn Yocum, Especialista en Contrataciones: Jaclyn.C.Yocum@usace.army.mil Línea de asunto para las respuestas: Respuesta a Investigación de Mercado: Proyecto de Modernización de Infraestructura en Callao, Perú - [Insertar nombre de la empresa] 10. PREGUNTAS: Las preguntas relacionadas con este Anuncio de Búsqueda de Fuentes pueden dirigirse a la Especialista en Contrataciones, Jaclyn Yocum (Jaclyn.C.Yocum@usace.army.mil ) y a la Oficial de Contrataciones, Renee Booth (Meranda.R.Booth@usace.army.mil), a las direcciones de correo electrónico indicadas en el anuncio original. ****BÚSQUEDA DE FUENTES ÚNICAMENTE PARA FINES DE INVESTIGACIÓN DE MERCADO**** | 59% | Market Research | 12/10/2026 |
The U.S. Army Corps of Engineers (USACE) Europe District is planning a procurement to award a new Design-Build and Design-Bid-Build Multiple Award Task Order Contract (DB-DBB MATOC) for construction projects in Latvia and Lithuania. The MATOC will have a five-year ordering period with a maximum capacity of $49.5M shared amongst the awardees, and will expire at the end of the ordering period or when the maximum capacity is reached, whichever comes first. Note: Though the corresponding Sources Sought Notice (#W912GB27X1CPR) listed Estonia in addition to Lativa and Lithuania, the Government has opted to exclude Estonia from the MATOC footprint based on the results of market research conducted. The solicitation for this procurement will use the two-phase design-build procedures of FAR 36, FAR 16.5, FAR 15, and other regulations and supplements. The Government anticipates issuing a Phase 1 - Request for Qualifications in December of 2026, followed by a Phase 2- Request for Proposal in March of 2027 with a target of five awards in the third quarter of 2027. The Request for Qualifications will be posted here through the Procurement Integrated Enterprise Environment (PIEE) website. Interested offerors must be registered in PIEE to submit a response. Cybersecurity Maturity Model Certification (CMMC) The scope included in the upcoming solicitation requires the contractor(s) and/or subcontractor(s) to process, store, or transmit Federal Contract Information (FCI) or Controlled Unclassified Information (CUI) through their information system(s) and requires the contractor and/or subcontractor(s) to comply with CMMC requirements. For any task orders that follow the MATOC award, the CMMC level will be determined at the time of task order RFP. Cybersecurity compliance (NIST SP 800 / CMMC Level 1) is not reimbursable. Offerors must hold the required CMMC certification at the time of award and throughout task order performance. Proof of CMMC compliance is required to be uploaded to the Supplier Performance Risk System (SPRS) module. The Government will use SPRS to verify certification status at award, and any offeror without the required certification at that time will be ineligible for award as their proposal will have failed to meet a material requirement of the solicitation and will be determined unacceptable. See DFARS 252.204-7021 "Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirements" and DFARS 252.204-7025 "Notice of Cybersecurity Maturity Model Certification Level Requirements" for the definitions, requirements, reporting, and subcontract information for this contract/order/agreement. NATO Security Investment Programme (NSIP) Task orders awarded against this MATOC may be funded through the NSIP. Only firms from the 32 North Atlantic Treaty Organization (NATO) countries will be permitted to participate as part of such task orders, to include the prime contractor, subcontractor(s), or manufacturer(s). None of the work required on NSIP-funded task orders, including labor and services, shall be performed by firms not registered and incorporated in one of the 32 NATO member nations. Additionally, no materials or items of equipment, to include identifiable sub-assemblies, shall be manufactured or assembled by a firm other than from within the 32 NATO member nations for such task orders. 1. Assembly: An item forming a portion of equipment that can be provisioned and replaced as an entity and which normally incorporates replaceable part of groups of parts. 2. Sub-Assembly: A portion of an assembly consisting of two or more parts that can be provisioned and replaced as an entity. 3. Manufactured: Made on an industrial scale. 4. Assembled: Fit together parts of. 5. Made in: Form from parts in. Note: The solicitation issued resulting from this notice will be in a separate announcement using the same Notice ID. A company must be registered and active in SAM to be considered for contract award. Further instructions and information can be found at https://sam.gov/content/entity-registration | 57% | Pre-Solicitation | 12/12/2026 |
This Sources Sought is not a Request for Proposal, Request for Quote, or Invitation for Bid. There is no commitment by the Government to issue a solicitation, make awards, or pay for respondent's expenditures made in response to this notice. Interested vendors are responsible for monitoring this notice for any subsequent amendments. All submissions become government property and will not be returned. Any solicitation issued resulting from this notice will be in a separate announcement. The purpose of this notice is to survey interest and obtain capability statements from industry to assist the Government in shaping the acquisition strategy. The U.S. Army Corps of Engineers (USACE) Europe District is planning a procurement to award a new Design-Build and Design-Bid-Build Multiple Award Task Order Contract (DB-DBB MATOC) for construction projects in Lithuania, and possibly Latvia and/or Estonia. The MATOC would have a five-year ordering period with a maximum capacity of $49.5M shared amongst the awardees, and expire at the end of the ordering period or when the maximum capacity is reached, whichever comes first. The Government anticipates issuing a Request for Proposal in the fourth quarter of 2026 with award in the second quarter of 2027. The solicitation would use the two-phase design-build procedures of FAR 36, FAR 16.5, FAR 15, and other regulations and supplements. The Government intends to use the market research results to determine the acquisition strategy, such as the geographic scope, number of awardees, and source selection criteria. MATOC DESCRIPTION The MATOC’s scope would cover construction requirements including but not limited to real property repair, maintenance, asbestos abatement, construction services, building renovation, road and pavement repair, incidental new minor construction, excavation, plumbing, demolition, electrical, structural, mechanical, concrete work, force protection, and environmental remedial work. The Government currently anticipates the following projects and magnitutdes. Small Arms Complex -- $5-10M Operations & Storage Bldg -- below $1M Simulator Facility -- $1-5M Multipurpose Range Complex Expansion -- $1-5M Install Target Positions -- $1-5M Improve Range & Maintenance Roads -- $1-5M Ammo Transfer Pad -- $1-5M Construct Observation Tower -- $1-5M Grenade Course, Live and Practice -- $1-5M Install Trench Complex -- $1-5M CAPABILITIES STATEMENT Vendors interested in the potential procurement shall submit a brief capabilities statement no longer than five pages in English with the following information. 1. Company name, address, Commercial and Government Entity (CAGE) code, and Unique Entity Identifier (UEI) number; and point of contact with phone number and e-mail address. 2. Describe experience performing similar work described above and the capability to perform multiple projects simultaneously in Lithuania, Latvia, and/or Estonia. Explain if work was performed as a prime contractor or as a subcontractor, and include project timelines and total contract value in U.S. dollars. 3. If there is no experience performing similar work in Lithuania, Latvia, and/or Estonia, describe the ability to perform in any of those countries in the future, such as creating a joint venture, teaming arrangement, etc. Email responses for this Sources Sought Notice by the due date and time indicated to Rosemarie Rollins at rosemarie.e.rollins@usace.army.mil and Ryan Fernandez at ryandale.r.fernandez@usace.army.mil, referencing W912GB27X1CPR in the subject line. Submissions will be shared with the government project delivery team, but otherwise will be held in strict confidence. No feedback will be provided to the respondents. For any questions, contact Rosemarie by email. | 57% | Market Research | 10/20/2026 |
Additional Details
Solicitation Number
W912GB15R0020
Archive Date
Jul 24, 2015